Proud to be a UK-based company
Contact usHose & Pipe
Maintenance Sub-Categories
invoice Page 11 of 77
Results 101 - 110 of 765
Part number: HRA3L03
Important compatibility info
| Title | Workshop Pro Hose Reel, Air Hose, 20m of 10mm i/d Hose |
Additional Information
Specifically designed for use with compressed air in garages, workshops and industrial applications, PCL’s hose reel range comes in three sizes, with different hose lengths and diameters to suit user needs. Each features a hose stop that stops in any position and is adjustable at the flick of a lever. All except the two bench top hose reels are slow retract, taking up to 9 seconds. Easy to maintain, cleaning brushes are now included as standard to avoid debris being taken back into the reel, which can cause the layering system to fail.
- Slow Retract up to 9 seconds
- Steel wall mounting 180° swivel bracket
- Copper tail coupling with dust cap
- in.High impact polypropylene construction for maximum durability in.
- Supplied with cleaning brushes
- Auto retract - Easily and smoothly rewinds the hose
- Easy to use adjustable hose stopper - Reduces non value added time
- Working pressure: 250 psi / 17 bar
- Hose Type: PVC
- Inlet & Outlet Size: 1/4in. BSPT
- Hose I.D: 10 mm
- Hose Length: 20 m
ONLY
£187.52
£187.52
Part number: HC1217
Important compatibility info
| Title | Hose Tail 9.5mm (3/8) i/d Hose to Male Thread R 1/4 |
Additional Information
Corrosive-resistant plated hose Tail Adaptor connects hose to a female fitting.
- Connects the hose to a female fitting
- Corrosive-resistant
- Thread size: R 1/4
- Thread type: Male
- Nominal Bore (mm): 4.8
- Flow Rate: 43 cfm @ 100 psi
- Maximum Working Pressure: 14 bar / 200 psi
ONLY
£4.61
£4.61
Part number: ACKIT01
Important compatibility info
Additional Information
The Emergency Coupling Kit is designed for the service engineer or to keep in a workshop in case of a pneumatic airline failure. This small, compact Emergency Coupling Kit contains all the parts you would need to repair any standard airline failure and have it up and running in minutes.
- Kit contains; x1 AC91CM, x2 ACA2746, x1 HC5656, x1 HC6560, x1 AC91CF, x1 HC6892, x1 HC1217, x1 HC6895, x2 ACA2593, x1 HC6893, x1 HC2479, x1 HC6896, x1 PTFE Tape, x2 OO Jubilee Clip, x2 OOO Jubilee Clip
- Solid compact pocket case with item numbers and descriptions on the inside to aid with replenishments
- Ideal to keep in a van or workshop
- Jubilee® Clips and PTFE tape to convert or repair an airline connection
- Includes genuine PCL couplings, adaptors, hosetails and hose connectors
ONLY
£55.03
£55.03
Part number: 83405
Important compatibility info
| Title | R Clips - 5mm - Pack of 10 |
Additional Information
- Bulk packed x 10 in poly bag
- R Clips 5mm diameter
- Length 110mm
ONLY
£6.27
£6.27
Part number: PPMS
Important compatibility info
| Title | Assorted M/S Hose Clips - Box of 32 |
Additional Information
- Covers recommended adjustment ranges from 9.5mm to 40mm
- Contains 32 assorted Jubilee Clips
- Convenient small pack
- Conform to British Standard BS5315
- Pack dimensions H 39mm x L 180mm x W 150mm
ONLY
£34.30
£34.30
Part number: OK175MS
Important compatibility info
| Title | O Clip Kit M/S - Pack of 175 |
Additional Information
Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. Jubilee 'O' Clips are two ear clamps widely used for maintenance and OEM applications. Mainly used on air, fluid, gas and steam lines, they are also suitable for low pressure hydraulic applications. Ideal for where the requirement is for a neat finish with no bulky housing to catch on obstructions. Pincers are used to crimp the ears of the clamps and affect a proper seal. A 'O' clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time.
In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- Mild steel zinc plated
- 175 'O' clips in a re-usable plastic container
ONLY
£75.91
£75.91
Part number: NB1820
Important compatibility info
| Title | Junior Clips M/S 18-20mm - Pack of 50 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- Recommended tightening torque - 1.5Nm, maximum tightening torque 2Nm
- 7mm A/F screw fastening
- Used in applications such as securing fuel lines and heater hoses
- Ideal for small bore hoses with relatively low pressures, where little clamping force is required
- Mini clips, also known as nut & bolt clips
ONLY
£26.64
£26.64
Part number: NB1618
Important compatibility info
| Title | Junior Clips M/S 16-18mm - Pack of 50 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- Recommended tightening torque - 1.5Nm, maximum tightening torque 2Nm
- 7mm A/F screw fastening
- Used in applications such as securing fuel lines and heater hoses
- Ideal for small bore hoses with relatively low pressures, where little clamping force is required
- Mini clips, also known as nut & bolt clips
ONLY
£24.28
£24.28
Part number: NB1517
Important compatibility info
| Title | Junior Clips M/S 15-17mm - Pack of 50 |
Additional Information
Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible.
The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time.
In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- Recommended tightening torque - 1.5Nm, maximum tightening torque 2Nm
- 7mm A/F screw fastening
- Used in applications such as securing fuel lines and heater hoses
- Ideal for small bore hoses with relatively low pressures, where little clamping force is required
- Mini clips, also known as nut & bolt clips
ONLY
£24.28
£24.28
Part number: NB1315
Important compatibility info
| Title | Junior Clips M/S 13-15mm - Pack of 50 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- Recommended tightening torque - 1.5Nm, maximum tightening torque 2Nm
- 7mm A/F screw fastening
- Used in applications such as securing fuel lines and heater hoses
- Ideal for small bore hoses with relatively low pressures, where little clamping force is required
- Mini clips, also known as nut & bolt clips
ONLY
£24.24
£24.24
Page 11 of 77
Hose & Pipe
