Hose & Pipe

Placement on Vehicle Rear
Type Hose, crankcase ventilation
Air Supply Hoses/Pipes from valve (crankcase ventilation) to intake manifold
Function Hose, crankcase ventilation
Extra Description febi Plus

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 193738 Crank Case Breather Pipe Hose
ONLY
£39.67
Quantity:
Function Breather Hose, expansion tank
Extra Description febi Plus
Material PA (polyamide)
Type Breather Hose, expansion tank
Outer diameter 14 mm
Inner diameter 7.5 mm

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 172906 Breather Hose, expansion tank
ONLY
£39.65
Quantity:
Please enter your vehicle information above to check this fits your vehicle!
Material Plastic
Colour Black
Function Hose, crankcase ventilation
Inner diameter 1 18 mm
Type Hose, crankcase ventilation
Hose Length 410 mm
Inner diameter 2 18 mm
Gates EMH374 Crank Case Breather Pipe Hose
ONLY
£39.36
Quantity:
Function Hose, fuel overflow
Colour Black
Material NBR (nitrile butadiene rubber)
Inner diameter 2 2 mm
Inner diameter 1 3 mm
Type Hose, fuel overflow
Hose Length 510 mm
Gates MFL1079 Moulded Fuel Hose / Pipe
ONLY
£39.26
Quantity:
No image found
ONLY
£39.25
Quantity:
Colour Black
Inner diameter 1 15.5 mm
Material Plastic
Hose Length 540 mm
Type Hose, crankcase ventilation
Inner diameter 2 10.5 mm
Function Hose, crankcase ventilation
Gates EMH721 Crank Case Breather Pipe Hose
ONLY
£39.23
Quantity:
Material Plastic
Colour Black
Inner diameter 1 18.5 mm
Inner diameter 2 16.5 mm
Type Hose, crankcase ventilation
Function Hose, crankcase ventilation
Hose Length 340 mm
Gates EMH334 Crank Case Breather Pipe Hose
ONLY
£38.75
Quantity:
Hose Length 775 mm
Inner diameter 2 17 mm
Inner diameter 1 16 mm
Material Plastic
Colour Black
Type Hose, crankcase ventilation
Function Hose, crankcase ventilation
Gates EMH264 Crank Case Breather Pipe Hose
ONLY
£38.49
Quantity:
Internal Dia. .265""
Material Nylon
Pack Qty Pack of 1
Pack Weight 0.42
Weight 0.42kg

Additional Information

Air Line Coil Nylon 25ft 3/8"" od
  • Nylon with protective springs at each end
  • 1/4"" BSP swivel nuts
  • 3/8"" O.D. x .265"" I.D. 25 ft (7.6m) working length
  • Workshop Warehouse AL10 AIR LINE COIL NYLON 25FT 3/8
    ONLY
    £38.47
    Quantity:
    Title Nylon Tubing Flexible - Black Metric 6.0 X 4.0
    Internal Dia. 6 mm
    Length 30M
    Pack Qty Length 30m Coil
    Pack Weight 0.5
    Temperature Range -40°C and +80°C
    Type Oil, petrol and diesel safe
    Weight 0.5kg

    Additional Information

    Nylon Tubing Flexible Black 6.0 x 4.0
  • DIN 73378 & DIN 74324 and BS 5409 Pt. 1
  • Oil, petrol and diesel safe. Suitable for air.
  • Withstands temperatures between -40°C and +80°C
  • DIN 73378 & DIN 74324 and BS 5409 Pt. 1
  • Workshop Warehouse TUB106 NYLON TUBING FLEXIBLE - BLACK METRIC 6.0 X 4.0
    ONLY
    £38.30
    Quantity:
    Title Hose Clips S/S 3X 60-80mm - Box of 10
    Material Stainless Steel
    Pack Qty Pack of 10
    Size 60-80mm

    Additional Information

    From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
  • The original worm drive hose clip
  • The band is continuously threaded to enable extra flexibility when adjusting the clip to the correct size
  • The smooth inside profile of the band and rolled edges give protection for all types of hoses including soft hoses made from rubber or silicone
  • Independently tested by the British Standards Institute (BSi) and carry the British Standard Kitemark™ BS 5315:1991
  • 304 grade stainless steel
  • Jubilee 3XSSP Hose Clip S/S 3x 60-80mm Pack Of 10
    ONLY
    £38.21
    Quantity:
    Material Plastic
    Type Fuel Line
    Function Fuel Line
    Colour Black
    Gates MFL1341 Moulded Fuel Hose / Pipe
    ONLY
    £38.13
    Quantity:
    Inner diameter 2 8 mm
    Placement on Vehicle between supply pump and fuel filter
    Function Fuel Line
    Type Fuel Line
    Hose Length 1070 mm
    Material Plastic
    Inner diameter 1 10 mm
    Colour Black
    Gates MFL1330 Moulded Fuel Hose / Pipe
    ONLY
    £37.65
    Quantity:
    Title Hose Clips S/S 3 55-70mm - Box of 10
    Material Stainless Steel
    Pack Qty Pack of 10
    Size 55-70mm

    Additional Information

    From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
  • The original worm drive hose clip
  • The band is continuously threaded to enable extra flexibility when adjusting the clip to the correct size
  • The smooth inside profile of the band and rolled edges give protection for all types of hoses including soft hoses made from rubber or silicone
  • Independently tested by the British Standards Institute (BSi) and carry the British Standard Kitemark™ BS 5315:1991
  • 304 grade stainless steel
  • Jubilee 3SS Hose Clip S/S 3 55-70mm Box Of 10
    ONLY
    £37.65
    Quantity:
    Type Hose, crankcase ventilation
    Hose Length 680 mm
    Inner diameter 2 16 mm
    Function Hose, crankcase ventilation
    Colour Black
    Material Plastic
    Inner diameter 1 19 mm
    Gates EMH511 Crank Case Breather Pipe Hose
    ONLY
    £37.46
    Quantity:
    Hose Length 520 mm
    Inner diameter 2 6 mm
    Inner diameter 1 6 mm
    Material Plastic
    Colour White-transparent
    Function Fuel Line
    Type Fuel Line
    Placement on Vehicle between fuel filter and high-pressure pump
    Gates MFL1171 Moulded Fuel Hose / Pipe
    ONLY
    £37.44
    Quantity:
    Function Hose, crankcase ventilation
    Inner diameter 1 21 mm
    Material NBR (nitrile butadiene rubber)
    Inner diameter 2 21 mm
    Type Hose, crankcase ventilation
    Hose Length 230 mm
    Colour Black
    Gates EMH455 Crank Case Breather Pipe Hose
    ONLY
    £37.42
    Quantity:
    Type Hose, crankcase ventilation
    Function Hose, crankcase ventilation
    Extra Description febi Plus
    Material Plastic

    Additional Information

    General Information

    These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

    Febi 180415 Crank Case Breather Pipe Hose
    ONLY
    £37.30
    Quantity:
    Inner diameter 2 6 mm
    Hose Length 400 mm
    Placement on Vehicle between fuel filter and high-pressure pump
    Inner diameter 1 6 mm
    Material Plastic
    Colour White-transparent
    Function Fuel Line
    Type Fuel Line
    Gates MFL1164 Moulded Fuel Hose / Pipe
    ONLY
    £37.20
    Quantity:
    Part number: 105763
    Function Hose, air supply
    Extra Description febi Plus
    Type Hose, air supply
    Additional Information 2 with quick couplers

    Additional Information

    General Information

    These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

    Febi 105763 Hose, air supply
    ONLY
    £37.15
    Quantity:
    Please enter your vehicle information above to check this fits your vehicle!
    Hose Length 300 mm
    Height 50 mm
    Width 70 mm
    Inner diameter 1 18 mm
    Inner diameter 2 23.5 mm
    Type Hose, crankcase ventilation
    Function Hose, crankcase ventilation
    Extra Description febi Plus
    for OE number 11 15 7 522 931
    Additional Information 2 with quick couplers

    Additional Information

    General Information

    These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

    Febi 170594 Crank Case Breather Pipe Hose
    ONLY
    £36.82
    Quantity:
    Title Air Line Assemblies With 1/4"" Bsp Swivel Nuts
    Internal Dia. 8 mm
    Length 10M
    Material Black Styrene Butadiene Rubber (SBR)
    Max. Pressure 20 bar
    Pack Qty Length 10m Coil
    Pack Weight 2.35
    Weight 2.35kg

    Additional Information

    Air Line Assembly 10m 1/4BSP 5/16"" id
  • Black styrene butadiene rubber (SBR)
  • Working pressure: 20 bar
  • Multi-directional rotation
  • Workshop Warehouse AL65 AIR LINE ASSEMBLIES WITH 1/4IN. BSP SWIVEL NUTS
    ONLY
    £36.71
    Quantity:
    Hose Length 540 mm
    Inner diameter 1 6 mm
    Material Plastic
    Colour Black
    Function Fuel Line
    Type Fuel Line
    Inner diameter 2 6 mm
    Placement on Vehicle between fuel filter and high-pressure pump
    Gates MFL1162 Moulded Fuel Hose / Pipe
    ONLY
    £36.60
    Quantity:
    Type Hose, crankcase ventilation
    Inner diameter 2 18 mm
    Hose Length 172 mm
    Function Hose, crankcase ventilation
    Material Plastic
    Inner diameter 1 24 mm
    Colour Black
    Gates EMH336 Crank Case Breather Pipe Hose
    ONLY
    £36.54
    Quantity:
    Please enter your vehicle information above to check this fits your vehicle!
    Hose Length 345 mm
    Material Plastic
    Colour Black
    Function Hose, crankcase ventilation
    Inner diameter 1 18 mm
    Type Hose, crankcase ventilation
    Gates EMH218 Crank Case Breather Pipe Hose
    ONLY
    £36.47
    Quantity:
    Material Plastic
    Colour Black
    Function Fuel Line
    Type Fuel Line
    Gates MFL1060 Moulded Fuel Hose / Pipe
    ONLY
    £36.22
    Quantity:
    Inner diameter 2 9.5 mm
    Inner diameter 1 20.5 mm
    Material Plastic
    Colour Black
    Function Hose, crankcase ventilation
    Hose Length 367 mm
    Type Hose, crankcase ventilation
    Gates EMH439 Crank Case Breather Pipe Hose
    ONLY
    £36.16
    Quantity:
    Material Plastic
    Inner diameter 1 10 mm
    Colour Black
    Inner diameter 2 10 mm
    Type Hose, crankcase ventilation
    Hose Length 300 mm
    Function Hose, crankcase ventilation
    Gates EMH288 Crank Case Breather Pipe Hose
    ONLY
    £36.09
    Quantity:
    Hose Length 370 mm
    Inner diameter 2 13.5 mm
    Material Rubber
    Colour Black
    Function Hose, crankcase ventilation
    Type Hose, crankcase ventilation
    Inner diameter 1 13.5 mm
    Gates EMH076 Crank Case Breather Pipe Hose
    ONLY
    £36.04
    Quantity:
    Operating temperature to +100 °C
    Material EPDM (ethylene propylene diene Monomer (M-class) rubber)
    Operating temperature from -40 °C
    Hose length 0.6 m
    Function Hose
    Inner diameter 2 75 mm
    Working pressure 1.4 bar
    Inner diameter 1 75 mm
    Type Hose
    Gates 7043 Extra Service Curved Hose
    ONLY
    £35.85
    Quantity:

    Page 7 of 30
    Hose & Pipe

    Your feedback more
    Trusted reviews more
    Secure payments more
    Simple returns more