Proud to be a UK-based company
Contact usHose & Pipe
Maintenance Sub-Categories
invoice Page 59 of 83
Results 581 - 590 of 824
Part number: 7026
Important compatibility info
| Operating temperature to | +100 °C |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Operating temperature from | -40 °C |
| Hose length | 0.3 m |
| Function | Hose |
| Inner diameter 1 | 18 mm |
| Inner diameter 2 | 18 mm |
| Working pressure | 4.6 bar |
| Type | Hose |
ONLY
£12.27
£12.27
Part number: EMH622
Important compatibility info
| Inner diameter 1 | 20.5 mm |
| Inner diameter 2 | 16.5 mm |
| Material | NBR (nitrile butadiene rubber) |
| Colour | Black |
| Function | Hose, crankcase ventilation |
| Type | Hose, crankcase ventilation |
| Hose Length | 427 mm |
ONLY
£12.27
£12.27
Part number: PWN1188
Important compatibility info
| Title | Diesel Spill Off Pipe |
Additional Information
20 x Diesel Spill Off Pipe Plugs
- Plugs Open Ends of Pipes
- For Diesel Vehicles
- Use with Diesel Spill Off Pipes
- PWN1188
ONLY
£12.24
£12.24
Part number: BHC1101
Important compatibility info
| Function | Fastening Clamp, charge air hose |
| Diameter To | 40 mm |
| Diameter From | 37 mm |
| Quantity | 5 |
| Width | 18 mm |
| Type | Fastening Clamp, charge air hose |
ONLY
£12.17
£12.17
Part number: BHC1102
Important compatibility info
| Width | 18 mm |
| Quantity | 5 |
| Diameter From | 40 mm |
| Diameter To | 43 mm |
| Function | Fastening Clamp, charge air hose |
| Type | Fastening Clamp, charge air hose |
ONLY
£12.17
£12.17
Part number: FHC1101
Important compatibility info
| Function | Fastening Clamp, charge air hose |
| Diameter To | 40 mm |
| Diameter From | 37 mm |
| Quantity | 5 |
| Width | 18 mm |
| Type | Fastening Clamp, charge air hose |
ONLY
£12.17
£12.17
Part number: 7027
Important compatibility info
| Operating temperature to | +100 °C |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Operating temperature from | -40 °C |
| Hose length | 0.3 m |
| Function | Hose |
| Working pressure | 4 bar |
| Inner diameter 2 | 22 mm |
| Inner diameter 1 | 22 mm |
| Type | Hose |
ONLY
£12.13
£12.13
Part number: PCP680
Important compatibility info
| Title | Rubber Lined Pipe Clips - 10mm - Pack of 10 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Pearl Automotive will have the solution for many of these replacement problems.
As part of their automotive spares and accessories range Pearl supply a range of replacement/spare pipe clips suitable for automotive use. These clips come as a pack of 10 and are able to hold and secure pipes of 10mm. It has a rubber inner lining to protect the pipes.
Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from electricals and exhausts to workshop consumables.
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Pearl Automotive will have the solution for many of these replacement problems. As part of their automotive spares and accessories range Pearl supply a range of replacement/spare pipe clips suitable for automotive use. These clips come as a pack of 10 and are able to hold and secure pipes of 10mm. It has a rubber inner lining to protect the pipes. Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.
- Protects damaged to any pipe
- Rubber lined
- Pipe clips with a fixing hole which is rubber lined to protect damage to any pipe
ONLY
£12.09
£12.09
Part number: JSC091MSP
Important compatibility info
| Title | Superclamp M/S 86-91mm - Pack of 2 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- Mild steel zinc plated
- Chromium VI free finish on all materials
- Assembly by manual or automatic tools
- Solid trunion maximises torque
- Bridge piece ensures 360 deg seal
- Smooth band protects hose
- Single nut adjustment
ONLY
£12.07
£12.07
Part number: PPH17C
Important compatibility info
| Title | Rubber Fuel Hose & Clips 12mm x 1m |
Additional Information
Over time hoses and pipes deteriorate. To avoid drips and leaks you may need to replace these from time to time to ensure that you vehicle is running effectively and efficiently. Pearl Automotive provide a wide range of replacement parts and accessories to cater for a wide range of circumstances.
This roll of fuel hose from Pearl Automotive is ¼ inch hose with a 6mm internal diameter. It comes in a 1m roll made from MBR.CR suitable for leaded and unleaded fuels.
Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.
Over time small parts deteriorate. To avoid a drop in your vehicles efficiency and performance you may need to replace these from time to time to ensure that you vehicle is running effectively and efficiently. Pearl Automotive provide a wide range of replacement parts and accessories to cater for a wide range of circumstances. This roll of fuel hose from Pearl Automotive is ¼ inch hose with a 6mm internal diameter. It comes in a 1m roll made from MBR.CR suitable for leaded and unleaded fuels. Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.
- 1m length with clips
- Suitable for use with leaded & unleaded petrol
- Made from NBR/ PVC/ CR classed as superior quality specific for unleaded injection systems.
ONLY
£12.06
£12.06
Page 59 of 83
Hose & Pipe
