Hose & Pipe

Title Hose Clips S/S OX 16-25mm - Pack of 2

Additional Information

From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Wot-Nots clips are have the solution. The Mild Steel hose clips which are also known as hose clamps are manufactured with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile clips extended in various situations from home usage in plumbing, to holding and securing road sings. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
  • Made from non corrosive stainless steel
  • Normally used for clamping hose from approximately 1/2in. upwards
  • Hose clip that is made from a band of metal passing through a worm drive
Wot-Nots PWN589 Hose Clip S/S Ox 16-25mm X2
ONLY
£4.57
Quantity:
Title Hose Tail 9.5mm (3/8) i/d Hose to Male Thread R 1/4

Additional Information

Corrosive-resistant plated hose Tail Adaptor connects hose to a female fitting.
  • Connects the hose to a female fitting
  • Corrosive-resistant
  • Thread size: R 1/4
  • Thread type: Male
  • Nominal Bore (mm): 4.8
  • Flow Rate: 43 cfm @ 100 psi
  • Maximum Working Pressure: 14 bar / 200 psi
PCL HC1217 Hose Tail 9.5mm (3/8) I/D Hose To R 1/4
ONLY
£4.52
Quantity:
Part number: BHC2001S
Function Fastening Clamp, charge air hose
Diameter To 48 mm
Diameter From 54 mm
Quantity 1
Type Fastening Clamp, charge air hose
Borg & Beck BHC2001S HORSESHOE CLIP
ONLY
£4.51
Quantity:
Part number: BHC2004S
Function Fastening Clamp, charge air hose
Diameter To 59 mm
Diameter From 67 mm
Quantity 1
Type Fastening Clamp, charge air hose
Borg & Beck BHC2004S HORSESHOE CLIP
ONLY
£4.51
Quantity:
Part number: FHC2001S
Function Fastening Clamp, charge air hose
Diameter To 48 mm
Diameter From 54 mm
Quantity 1
Type Fastening Clamp, charge air hose
First Line FHC2001S Horse Shoe Clip
ONLY
£4.51
Quantity:

Hose & Pipe

Your feedback more
Trusted reviews more
Secure payments more
Simple returns more