Car Parts & Accessories by Apec
With over 50 years of experience in the automotive aftermarket, Apec has firmly established itself as a market-leading specialist in supplying braking components and products to the UK and Ireland.
Today, Apec has developed its decades of expertise into a growing catalogue of parts and accessories that branch out beyond braking to meet the demands of an evolving marketplace.
From coil springs to shock absorbers, the name that was once synonymous with quality braking now means excellence on every level. Important compatibility info
| Function | Clutch Kit |
| Diameter | 220 mm |
| Type | Clutch Kit |
| Additional Information | with central slave cylinder |
Important compatibility info
| Type | Headlight |
| Function | Headlight |
| Placement on Vehicle | Left |
| Vehicle Equipment | for vehicles with headlight levelling (electric) |
| Bulb Type | H7/H1 |
| Registration Type | ECE approved |
Important compatibility info
| Type | Headlight |
| Function | Headlight |
| Placement on Vehicle | Left |
| Vehicle Equipment | for vehicles with headlight levelling (electric) |
| Bulb Type | H7/H1 |
| Registration Type | ECE approved |
Important compatibility info
| Function | Drive Shaft |
| External Teeth, Wheel Side | 36 |
| Length | 630 mm |
| Type | Drive Shaft |
| External Teeth, Diff.Side | 28 |
| Placement on Vehicle | Front Axle Left |
| Manufacturer | SEAT SKODA VOLKSWAGEN |
| Model | FABIA IBIZA POLO |
Important compatibility info
| Function | Drive Shaft |
| External Teeth, Wheel Side | 36 |
| Length | 630 mm |
| Type | Drive Shaft |
| External Teeth, Diff.Side | 28 |
| Placement on Vehicle | Front Axle Left |
| Manufacturer | SEAT SKODA VOLKSWAGEN |
| Model | FABIA IBIZA POLO |
Important compatibility info
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Placement on Vehicle | Rear Axle |
| Additional Information 2 | with ABS sensor ring |
Important compatibility info
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Placement on Vehicle | Rear Axle |
| Additional Information 2 | with ABS sensor ring |
Important compatibility info
| Operating Mode | Hydraulic |
| for steering manufacturer | SAGINAW |
| Type | Hydraulic Pump, steering |
| Function | Hydraulic Pump, steering |
| Additional Information 2 | Belt Pulley pressed on |
| Pulleys | without belt pulley |
| Belt Pulley Diameter | 137 mm |
| Number of grooves | 6 |
Important compatibility info
| Operating Mode | Hydraulic |
| for steering manufacturer | SAGINAW |
| Type | Hydraulic Pump, steering |
| Function | Hydraulic Pump, steering |
| Additional Information 2 | Belt Pulley pressed on |
| Pulleys | without belt pulley |
| Belt Pulley Diameter | 137 mm |
| Number of grooves | 6 |
Important compatibility info
| Type | Exterior Mirror |
| Function | Exterior Mirror |
Important compatibility info
| Type | Exterior Mirror |
| Function | Exterior Mirror |
Important compatibility info
| Belt Pulley Diameter | 58 mm |
| Number of Ribs | 4 |
| Pulleys | without belt pulley |
| Alternator Charge Current | 90 A |
| Manufacturer Restriction | Valeo |
| Function | Alternator |
| Voltage | 12 V |
| Type | Alternator |
| Manufacturer | HYUNDAI KIA |
| Model | ACCENT RIO TRAJET |
Important compatibility info
| Belt Pulley Diameter | 58 mm |
| Number of Ribs | 4 |
| Pulleys | without belt pulley |
| Alternator Charge Current | 90 A |
| Manufacturer Restriction | Valeo |
| Function | Alternator |
| Voltage | 12 V |
| Type | Alternator |
| Manufacturer | HYUNDAI KIA |
| Model | ACCENT RIO TRAJET |
Important compatibility info
| Length 1 | 893 mm |
| Length 2 | 860 mm |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
Important compatibility info
| Length 1 | 893 mm |
| Length 2 | 860 mm |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
Important compatibility info
| Piston diameter 1 | 38 mm |
| Function | Brake Caliper |
| Brake Disc Type | Solid |
| Brake System | TRW |
| Placement on Vehicle | behind the axle |
| Model | 3008 5008 508 DS5 |
| Manufacturer | CITROEN DS PEUGEOT |
| Material | Aluminium |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Part number of recommended accessories | BBS6, BSC1 |
| Type | Brake Caliper |
| for brake disc thickness | 12 mm |
| for brake disc diameter | 268 mm |
Important compatibility info
| Piston diameter 1 | 38 mm |
| Function | Brake Caliper |
| Brake Disc Type | Solid |
| Brake System | TRW |
| Placement on Vehicle | behind the axle |
| Model | 3008 5008 508 DS5 |
| Manufacturer | CITROEN DS PEUGEOT |
| Material | Aluminium |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Part number of recommended accessories | BBS6, BSC1 |
| Type | Brake Caliper |
| for brake disc thickness | 12 mm |
| for brake disc diameter | 268 mm |
Important compatibility info
| Brake Disc Type | Solid |
| Brake System | TRW |
| Model | 3008 5008 508 DS5 |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Type | Brake Caliper |
| Part number of recommended accessories | BBS6, BSC1 |
| Function | Brake Caliper |
| for brake disc diameter | 268 mm |
| for brake disc thickness | 12 mm |
| Manufacturer | CITROEN DS PEUGEOT |
| Placement on Vehicle | behind the axle |
| Material | Aluminium |
| Piston diameter 1 | 38 mm |
Important compatibility info
| Brake Disc Type | Solid |
| Brake System | TRW |
| Model | 3008 5008 508 DS5 |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Type | Brake Caliper |
| Part number of recommended accessories | BBS6, BSC1 |
| Function | Brake Caliper |
| for brake disc diameter | 268 mm |
| for brake disc thickness | 12 mm |
| Manufacturer | CITROEN DS PEUGEOT |
| Placement on Vehicle | behind the axle |
| Material | Aluminium |
| Piston diameter 1 | 38 mm |
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 11 |
| Rated Power | 1.4 kW |
| Number of mounting bores | 3 |
| Type | Starter |
| Function | Starter |
| Manufacturer | ALFA ROMEO FIAT JEEP VAUXHALL |
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 11 |
| Rated Power | 1.4 kW |
| Number of mounting bores | 3 |
| Type | Starter |
| Function | Starter |
| Manufacturer | ALFA ROMEO FIAT JEEP VAUXHALL |
Important compatibility info
| Diameter | 230 mm |
| Additional Information | without central slave cylinder |
| Additional Information 2 | with clutch release bearing |
| Type | Clutch Kit |
| Function | Clutch Kit |
Important compatibility info
| Diameter | 230 mm |
| Additional Information | without central slave cylinder |
| Additional Information 2 | with clutch release bearing |
| Type | Clutch Kit |
| Function | Clutch Kit |
Important compatibility info
| Rated Power | 1.6 kW |
| Rotation Direction | Clockwise rotation |
| Manufacturer Restriction | MITSUBA |
| Voltage | 12 V |
| Number of Teeth | 9 |
| Function | Starter |
| Type | Starter |
| Number of mounting bores | 2 |
| Manufacturer | HONDA |
| Model | ACCORD |
Important compatibility info
| Rated Power | 1.6 kW |
| Rotation Direction | Clockwise rotation |
| Manufacturer Restriction | MITSUBA |
| Voltage | 12 V |
| Number of Teeth | 9 |
| Function | Starter |
| Type | Starter |
| Number of mounting bores | 2 |
| Manufacturer | HONDA |
| Model | ACCORD |
Important compatibility info
| Alternator Charge Current | 124 A |
| Function | Alternator |
| Manufacturer Restriction | Visteon |
| Type | Alternator |
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | without belt pulley |
| Manufacturer | FORD |
| Model | MONDEO |
Important compatibility info
| Alternator Charge Current | 124 A |
| Function | Alternator |
| Manufacturer Restriction | Visteon |
| Type | Alternator |
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | without belt pulley |
| Manufacturer | FORD |
| Model | MONDEO |
Important compatibility info
| Shock Absorber Design | Suspension Strut |
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Mounting Type | Top pin |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Manufacturer | BMW |
Important compatibility info
| Shock Absorber Design | Suspension Strut |
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Mounting Type | Top pin |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Manufacturer | BMW |
Important compatibility info
| Placement on Vehicle | Left |
| Bulb Type | H4 |
| Driver Position | for right-hand drive vehicles |
| Type | Headlight |
| Function | Headlight |
Important compatibility info
| Placement on Vehicle | Left |
| Bulb Type | H4 |
| Driver Position | for right-hand drive vehicles |
| Type | Headlight |
| Function | Headlight |
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Monotube |
| Shock Absorber Design | Telescopic Shock Absorber |
| Shock Absorber Mounting Type | Bottom eye, Top pin |
| Type | Shock Absorber |
| Function | Shock Absorber |
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Monotube |
| Shock Absorber Design | Telescopic Shock Absorber |
| Shock Absorber Mounting Type | Bottom eye, Top pin |
| Type | Shock Absorber |
| Function | Shock Absorber |
Important compatibility info
| Type | Starter |
| Voltage | 12 V |
| Manufacturer Restriction | Bosch |
| Function | Starter |
| Rated Power | 2.2 kW |
| Number of Teeth | 9 |
| Manufacturer | AUDI PORSCHE VOLKSWAGEN |
| Model | CAYENNE Q7 TOUAREG |
Important compatibility info
| Type | Starter |
| Voltage | 12 V |
| Manufacturer Restriction | Bosch |
| Function | Starter |
| Rated Power | 2.2 kW |
| Number of Teeth | 9 |
| Manufacturer | AUDI PORSCHE VOLKSWAGEN |
| Model | CAYENNE Q7 TOUAREG |
Important compatibility info
| Type | Clutch Kit |
| Diameter | 240 mm |
| Additional Information | with central slave cylinder |
| Function | Clutch Kit |
Important compatibility info
| Type | Clutch Kit |
| Diameter | 240 mm |
| Additional Information | with central slave cylinder |
| Function | Clutch Kit |
Important compatibility info
| Type | Headlight |
| Function | Headlight |
| Placement on Vehicle | Left |
Important compatibility info
| Type | Headlight |
| Function | Headlight |
| Placement on Vehicle | Left |
Important compatibility info
| Type | Headlight |
| Function | Headlight |
| Placement on Vehicle | Right |
Important compatibility info
| Type | Headlight |
| Function | Headlight |
| Placement on Vehicle | Right |
Important compatibility info
| Brake Disc Type | Vented |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Part number of recommended accessories | BBS6, BSC1 |
| Function | Brake Caliper |
| for brake disc thickness | 36 mm |
| Manufacturer | BMW |
| Piston diameter 1 | 60 mm |
| Brake System | ATE |
| Placement on Vehicle | behind the axle |
| Material | Aluminium |
| Type | Brake Caliper |
| for brake disc diameter | 348 mm |
Important compatibility info
| Brake Disc Type | Vented |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Part number of recommended accessories | BBS6, BSC1 |
| Function | Brake Caliper |
| for brake disc thickness | 36 mm |
| Manufacturer | BMW |
| Piston diameter 1 | 60 mm |
| Brake System | ATE |
| Placement on Vehicle | behind the axle |
| Material | Aluminium |
| Type | Brake Caliper |
| for brake disc diameter | 348 mm |
Important compatibility info
| for brake disc diameter | 348 mm |
| Piston diameter 1 | 60 mm |
| Type | Brake Caliper |
| Model | 518D 520D 525D 528 530D 535 |
| Function | Brake Caliper |
| Part number of recommended accessories | BBS6, BSC1 |
| Material | Aluminium |
| Placement on Vehicle | behind the axle |
| Brake Disc Type | Vented |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Brake System | ATE |
| for brake disc thickness | 30 mm |
| Manufacturer | BMW |
Important compatibility info
| for brake disc diameter | 348 mm |
| Piston diameter 1 | 60 mm |
| Type | Brake Caliper |
| Model | 518D 520D 525D 528 530D 535 |
| Function | Brake Caliper |
| Part number of recommended accessories | BBS6, BSC1 |
| Material | Aluminium |
| Placement on Vehicle | behind the axle |
| Brake Disc Type | Vented |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Brake System | ATE |
| for brake disc thickness | 30 mm |
| Manufacturer | BMW |
Important compatibility info
| Material | Aluminium |
| Placement on Vehicle | behind the axle |
| Brake Disc Type | Vented |
| Piston diameter 1 | 60 mm |
| for brake disc thickness | 36 mm |
| for brake disc diameter | 348 mm |
| Manufacturer | BMW |
| Brake System | ATE |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Type | Brake Caliper |
| Part number of recommended accessories | BBS6, BSC1 |
| Function | Brake Caliper |
Important compatibility info
| Material | Aluminium |
| Placement on Vehicle | behind the axle |
| Brake Disc Type | Vented |
| Piston diameter 1 | 60 mm |
| for brake disc thickness | 36 mm |
| for brake disc diameter | 348 mm |
| Manufacturer | BMW |
| Brake System | ATE |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Type | Brake Caliper |
| Part number of recommended accessories | BBS6, BSC1 |
| Function | Brake Caliper |
Important compatibility info
| Part number of recommended accessories | BBS6, BSC1 |
| Type | Brake Caliper |
| for brake disc diameter | 348 mm |
| Manufacturer | BMW |
| Function | Brake Caliper |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Material | Aluminium |
| Placement on Vehicle | behind the axle |
| Model | 518D 520D 525D 528 530D 535 |
| Brake System | ATE |
| for brake disc thickness | 30 mm |
| Piston diameter 1 | 60 mm |
| Brake Disc Type | Vented |
Important compatibility info
| Part number of recommended accessories | BBS6, BSC1 |
| Type | Brake Caliper |
| for brake disc diameter | 348 mm |
| Manufacturer | BMW |
| Function | Brake Caliper |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Material | Aluminium |
| Placement on Vehicle | behind the axle |
| Model | 518D 520D 525D 528 530D 535 |
| Brake System | ATE |
| for brake disc thickness | 30 mm |
| Piston diameter 1 | 60 mm |
| Brake Disc Type | Vented |
Important compatibility info
| Width | 76 mm |
| Additional Information | with accessories |
| Material | Metal |
| Outer diameter | 182 mm |
| Additional Information 2 | with damping |
| Inner diameter | 40 mm |
| Number of Ribs | 5 |
| for OE number | 11237797995 |
| Number of grooves | 6 |
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023
























