Car Parts & Accessories by Apec
With over 50 years of experience in the automotive aftermarket, Apec has firmly established itself as a market-leading specialist in supplying braking components and products to the UK and Ireland.
Today, Apec has developed its decades of expertise into a growing catalogue of parts and accessories that branch out beyond braking to meet the demands of an evolving marketplace.
From coil springs to shock absorbers, the name that was once synonymous with quality braking now means excellence on every level. Important compatibility info
| Type | Drive Shaft |
| Number of Teeth, ABS ring | 52 |
| External Teeth, Wheel Side | 30 |
| External Teeth, Diff.Side | 28 |
| Function | Drive Shaft |
| Length 2 | 704 mm |
| Placement on Vehicle | Front Axle Left |
| Length | 654 mm |
Important compatibility info
| Type | Drive Shaft |
| Number of Teeth, ABS ring | 52 |
| External Teeth, Wheel Side | 30 |
| External Teeth, Diff.Side | 28 |
| Function | Drive Shaft |
| Length 2 | 704 mm |
| Placement on Vehicle | Front Axle Left |
| Length | 654 mm |
Important compatibility info
| Placement on Vehicle | Left |
| Bulb Type | LED |
| Section | Outer section |
| Registration Type | ECE approved |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
Important compatibility info
| Placement on Vehicle | Left |
| Bulb Type | LED |
| Section | Outer section |
| Registration Type | ECE approved |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
Important compatibility info
| Voltage | 12 V |
| Pulleys | without belt pulley |
| Alternator Charge Current | 105 A |
| Function | Alternator |
| Manufacturer Restriction | Marelli |
| Type | Alternator |
| Number of Ribs | 5 |
Important compatibility info
| Voltage | 12 V |
| Pulleys | without belt pulley |
| Alternator Charge Current | 105 A |
| Function | Alternator |
| Manufacturer Restriction | Marelli |
| Type | Alternator |
| Number of Ribs | 5 |
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with freewheel belt pulley |
| Alternator Charge Current | 210 A |
| Type | Alternator |
| Manufacturer Restriction | Valeo |
| Function | Alternator |
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with freewheel belt pulley |
| Alternator Charge Current | 210 A |
| Type | Alternator |
| Manufacturer Restriction | Valeo |
| Function | Alternator |
Important compatibility info
| for OE number | 99610601172 |
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
| Pulleys | without belt pulley |
| Manufacturer | PORSCHE |
| Model | 911 |
| Number of Teeth | 6 |
| Number of Wings | 6 |
| Water Pump Type | for V-ribbed belt use |
Important compatibility info
| for OE number | 99610601172 |
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
| Pulleys | without belt pulley |
| Manufacturer | PORSCHE |
| Model | 911 |
| Number of Teeth | 6 |
| Number of Wings | 6 |
| Water Pump Type | for V-ribbed belt use |
Important compatibility info
| Placement on Vehicle | Left |
| Bulb Type | LED |
| Section | Outer section |
| Registration Type | ECE approved |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
Important compatibility info
| Placement on Vehicle | Left |
| Bulb Type | LED |
| Section | Outer section |
| Registration Type | ECE approved |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
Important compatibility info
| Operating Mode | Hydraulic |
| Type | Hydraulic Pump, steering |
| Function | Hydraulic Pump, steering |
| Pulleys | without belt pulley |
Important compatibility info
| Operating Mode | Hydraulic |
| Type | Hydraulic Pump, steering |
| Function | Hydraulic Pump, steering |
| Pulleys | without belt pulley |
Important compatibility info
| Additional Information 2 | with integrated ABS sensor |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Placement on Vehicle | Front Axle |
Important compatibility info
| Additional Information 2 | with integrated ABS sensor |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Placement on Vehicle | Front Axle |
Important compatibility info
| Function | Hydraulic Pump, steering |
| Operating Mode | Hydraulic |
| for steering manufacturer | LUK |
| Type | Hydraulic Pump, steering |
| Pulleys | without belt pulley |
Important compatibility info
| Function | Hydraulic Pump, steering |
| Operating Mode | Hydraulic |
| for steering manufacturer | LUK |
| Type | Hydraulic Pump, steering |
| Pulleys | without belt pulley |
Important compatibility info
| Function | Starter |
| Rated Power | 1 kW |
| Number of mounting bores | 3 |
| Rotation Direction | Clockwise rotation |
| Model | MX5 |
| Manufacturer | MAZDA |
| Manufacturer Restriction | Mitsubishi |
| Type | Starter |
| Number of Thread Bores | 2 |
| Number of Teeth | 8 |
| Voltage | 12 V |
Important compatibility info
| Function | Starter |
| Rated Power | 1 kW |
| Number of mounting bores | 3 |
| Rotation Direction | Clockwise rotation |
| Model | MX5 |
| Manufacturer | MAZDA |
| Manufacturer Restriction | Mitsubishi |
| Type | Starter |
| Number of Thread Bores | 2 |
| Number of Teeth | 8 |
| Voltage | 12 V |
Important compatibility info
| Type | Drive Shaft |
| Function | Drive Shaft |
| Placement on Vehicle | Rear Axle Right |
Important compatibility info
| Type | Drive Shaft |
| Function | Drive Shaft |
| Placement on Vehicle | Rear Axle Right |
Important compatibility info
| Piston diameter 1 | 43 mm |
| Brake Disc Type | Solid |
| Placement on Vehicle | Rear Axle Right |
| Material | Grey Cast Iron |
| Function | Brake Caliper |
| Type | Brake Caliper |
| for brake disc thickness | 22 mm |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Brake System | TRW |
Important compatibility info
| Piston diameter 1 | 43 mm |
| Brake Disc Type | Solid |
| Placement on Vehicle | Rear Axle Right |
| Material | Grey Cast Iron |
| Function | Brake Caliper |
| Type | Brake Caliper |
| for brake disc thickness | 22 mm |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Brake System | TRW |
Important compatibility info
| Belt Pulley Diameter | 128 mm |
| Additional Information | without reservoir |
| for steering manufacturer | ZF |
| Function | Hydraulic Pump, steering |
| Rotation Direction | Clockwise rotation |
| Operating Mode | Hydraulic |
| Pulleys | without belt pulley |
| Pressure | 120 bar |
| Type | Hydraulic Pump, steering |
| Number of grooves | 6 |
| Additional Information 2 | Belt Pulley pressed on |
Important compatibility info
| Belt Pulley Diameter | 128 mm |
| Additional Information | without reservoir |
| for steering manufacturer | ZF |
| Function | Hydraulic Pump, steering |
| Rotation Direction | Clockwise rotation |
| Operating Mode | Hydraulic |
| Pulleys | without belt pulley |
| Pressure | 120 bar |
| Type | Hydraulic Pump, steering |
| Number of grooves | 6 |
| Additional Information 2 | Belt Pulley pressed on |
Important compatibility info
| Diameter | 280 mm |
| Additional Information 2 | with clutch release bearing |
| Type | Clutch Kit |
| Function | Clutch Kit |
Important compatibility info
| Diameter | 280 mm |
| Additional Information 2 | with clutch release bearing |
| Type | Clutch Kit |
| Function | Clutch Kit |
Important compatibility info
| Type | Hydraulic Pump, steering |
| Function | Hydraulic Pump, steering |
| Operating Mode | Hydraulic |
Important compatibility info
| Type | Hydraulic Pump, steering |
| Function | Hydraulic Pump, steering |
| Operating Mode | Hydraulic |
Important compatibility info
| Function | Alternator |
| Manufacturer Restriction | Valeo |
| Type | Alternator |
| Alternator Charge Current | 110 A |
| Pulleys | without belt pulley |
| Voltage | 12 V |
| Number of Ribs | 6 |
| Manufacturer | OPEL RENAULT VAUXHALL |
Important compatibility info
| Function | Alternator |
| Manufacturer Restriction | Valeo |
| Type | Alternator |
| Alternator Charge Current | 110 A |
| Pulleys | without belt pulley |
| Voltage | 12 V |
| Number of Ribs | 6 |
| Manufacturer | OPEL RENAULT VAUXHALL |
Important compatibility info
| Length 2 | 615 mm |
| External Teeth, Diff.Side | 31 |
| External Teeth, Wheel Side | 40 |
| Length | 555 mm |
| Placement on Vehicle | Front Axle Left |
| Type | Drive Shaft |
| Function | Drive Shaft |
Important compatibility info
| Length 2 | 615 mm |
| External Teeth, Diff.Side | 31 |
| External Teeth, Wheel Side | 40 |
| Length | 555 mm |
| Placement on Vehicle | Front Axle Left |
| Type | Drive Shaft |
| Function | Drive Shaft |
Important compatibility info
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
Important compatibility info
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
Important compatibility info
| Voltage | 12 V |
| Pulleys | without belt pulley |
| Function | Alternator |
| Manufacturer Restriction | Visteon |
| Type | Alternator |
| Number of Ribs | 6 |
| Alternator Charge Current | 80 A |
| Belt Pulley Diameter | 55 mm |
| Manufacturer | FORD |
| Model | FIESTA FUSION |
Important compatibility info
| Voltage | 12 V |
| Pulleys | without belt pulley |
| Function | Alternator |
| Manufacturer Restriction | Visteon |
| Type | Alternator |
| Number of Ribs | 6 |
| Alternator Charge Current | 80 A |
| Belt Pulley Diameter | 55 mm |
| Manufacturer | FORD |
| Model | FIESTA FUSION |
Important compatibility info
| Alternator Charge Current | 140 A |
| Belt Pulley Diameter | 56 mm |
| Voltage | 12 V |
| Function | Alternator |
| Type | Alternator |
| Pulleys | with freewheel belt pulley |
| Number of Ribs | 6 |
| Manufacturer | AUDI SEAT SKODA VOLKSWAGEN |
| Manufacturer Restriction | Bosch |
Important compatibility info
| Alternator Charge Current | 140 A |
| Belt Pulley Diameter | 56 mm |
| Voltage | 12 V |
| Function | Alternator |
| Type | Alternator |
| Pulleys | with freewheel belt pulley |
| Number of Ribs | 6 |
| Manufacturer | AUDI SEAT SKODA VOLKSWAGEN |
| Manufacturer Restriction | Bosch |
Important compatibility info
| Additional Information | with gears |
| Chain Type | Simplex |
| Number of Chain Links | 108 |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
Important compatibility info
| Additional Information | with gears |
| Chain Type | Simplex |
| Number of Chain Links | 108 |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Left |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Rod/Strut | Push Rod |
| Cone Size | 24 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Manufacturer | MERCEDES |
| Model | X250 |
| Paired article numbers | AST3001 |
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Left |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Rod/Strut | Push Rod |
| Cone Size | 24 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Manufacturer | MERCEDES |
| Model | X250 |
| Paired article numbers | AST3001 |
Important compatibility info
| Additional Information | with central slave cylinder |
| Function | Clutch Kit |
| Type | Clutch Kit |
| Diameter | 230 mm |
Important compatibility info
| Additional Information | with central slave cylinder |
| Function | Clutch Kit |
| Type | Clutch Kit |
| Diameter | 230 mm |
Important compatibility info
| Piston diameter 1 | 42 mm |
| Brake System | Brembo |
| Brake Disc Type | Vented |
| Part number of recommended accessories | BBS6, BSC1 |
| Type | Brake Caliper |
| Model | Q5 |
| Function | Brake Caliper |
| Brake Caliper Type | Brake Caliper (4 pistons) |
| Placement on Vehicle | behind the axle |
| Manufacturer | AUDI |
| for brake disc thickness | 30 mm |
| for brake disc diameter | 320 mm |
Important compatibility info
| Piston diameter 1 | 42 mm |
| Brake System | Brembo |
| Brake Disc Type | Vented |
| Part number of recommended accessories | BBS6, BSC1 |
| Type | Brake Caliper |
| Model | Q5 |
| Function | Brake Caliper |
| Brake Caliper Type | Brake Caliper (4 pistons) |
| Placement on Vehicle | behind the axle |
| Manufacturer | AUDI |
| for brake disc thickness | 30 mm |
| for brake disc diameter | 320 mm |
Important compatibility info
| Width | 76 mm |
| Material | Metal |
| Outer diameter | 182 mm |
| Additional Information 2 | with damping |
| Inner diameter | 40 mm |
| Number of Ribs | 5 |
| Number of grooves | 6 |
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
Important compatibility info
| Width | 76 mm |
| Material | Metal |
| Outer diameter | 182 mm |
| Additional Information 2 | with damping |
| Inner diameter | 40 mm |
| Number of Ribs | 5 |
| Number of grooves | 6 |
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023
























