Proud to be a UK-based company
Contact usLocks by Autowave
Body Sub-Categories
invoice Page 24 of 58
Results 231 - 240 of 578
Part number: AUTTC026
Important compatibility info
| Title | OEM NXP Ford PCF7939FA ID47/49 128 |
Additional Information
- They can either be built onto the PCB (On-Board) or housed separately in the key (Off-Board).
- Transponder chips are the part of the key that connect with the immobiliser and are often either carbon or glass.
- Programming: Diagnostically
- Reference: PCF7939FA ID47
- Transponder Type: Carbon
- Transponder chips work by forming a ‘handshake’ between the vehicle key and the vehicle itself via an aerial near the ignition barrel.
ONLY
£17.23
£17.23
Part number: AUTTC031
Important compatibility info
| Title | PCF7939 ID4A 128bit Transponder Chip |
Additional Information
- They can either be built onto the PCB (On-Board) or housed separately in the key (Off-Board).
- Transponder chips are the part of the key that connect with the immobiliser and are often either carbon or glass.
- Programming: Diagnostically
- Reference: PCF7939MA ID4A
- Transponder Type: Carbon
- Transponder chips work by forming a ‘handshake’ between the vehicle key and the vehicle itself via an aerial near the ignition barrel.
ONLY
£17.23
£17.23
Part number: AUTKC014
Important compatibility info
| Title | Ford HU101 Flip Blade Section with ID63 Transponder |
Additional Information
- There are many types of key blades however typically automotive manufactures will use the same blade profile across large parts of their vehicle range.
- Blade: HU101
- This item is non-returnable once cut
- This is a blade section designed for Ford three button remotes. You can simply swap this into an existing remote
- Key blades are the metal part of the key that is cut specifically to each car.
- Battery: None
- Frequency: None
- Buttons: None
- Transponder: ID/4D63 80Bit
ONLY
£17.16
£17.16
Part number: AUTPINREMOVE
Important compatibility info
| Title | Remote Pin Removal Set |
Additional Information
- Sometimes will operate other features such as the headlights.
- Remote keys are the typical modern vehicle key and come with buttons to operate the central locking features.
- This item is non-returnable once cut
- These are designed to be placed onto the pin and carefully hammered out.
- This set is designed to allow the removal of a wide variety of pins using a series of different prongs
ONLY
£16.76
£16.76
Part number: AUTKC013
Important compatibility info
| Title | Mercedes-Benz 3 Button Chrome IR/Keyless Remote Case |
Additional Information
- Sometimes will operate other features such as the headlights.
- Blade: Supplied Separately
- Remote key cases are for the typical modern vehicle key and come with buttons to operate the central locking features.
- Battery: None
- Frequency: None
- Buttons: 3 Buttons (Lock, Unlock & Boot)
- Transponder: None
ONLY
£16.18
£16.18
Part number: AUTMC15S
Important compatibility info
| Title | Autowave Milling Cutter 1.5mm For Condor/Godzilla/E9/A9 |
Additional Information
- Miracle A9
- Xhorse Dolphin
- Suitable for:
- Kukai E9
- Xtool KNC91
- CGDI Godzilla
- A high quality replacement 1.5mm cutter for key cutting machines.
- Xhorse Condor
ONLY
£15.03
£15.03
Part number: AUTKC224
Important compatibility info
| Title | RAV Toyota 3 Button Smart Remote Case |
Additional Information
- Sometimes will operate other features such as the headlights.
- Blade: Supplied Separately
- Battery: None
- Remote key cases are for the typical modern vehicle key and come with buttons to operate the central locking features.
- Frequency: None
- Buttons: 3 Buttons (Lock, Unlock & Boot)
- Transponder: None
ONLY
£14.69
£14.69
Part number: AUTKC264
Important compatibility info
| Title | RAV Toyota 2 Button Remote Case |
Additional Information
- Sometimes will operate other features such as the headlights.
- Blade: Sold separately
- Remote key cases are for the typical modern vehicle key and come with buttons to operate the central locking features.
- Battery: None
- Frequency: None
- Buttons: 2 Buttons (Lock & Unlock)
- Transponder: None
ONLY
£14.54
£14.54
Part number: AUTMC25S
Important compatibility info
| Title | Autowave Milling Cutter 2.5mm For Condor/Godzilla/E9/A9 |
Additional Information
- Miracle A11
- Xhorse Dolphin
- Suitable for:
- Kukai E11
- Xtool KNC93
- CGDI Godzilla
- A high quality replacement 2.5mm cutter for key cutting machines.
- Xhorse Condor
ONLY
£14.32
£14.32
Part number: AUTMC20S
Important compatibility info
| Title | Autowave Milling Cutter 2.0mm For Condor/Godzilla/E9/A9 |
Additional Information
- Miracle A10
- Xhorse Dolphin
- Suitable for:
- Kukai E10
- Xtool KNC92
- CGDI Godzilla
- A high quality replacement 2.0mm cutter for key cutting machines.
- Xhorse Condor
ONLY
£14.31
£14.31
Page 24 of 58
Locks
