Car Parts & Accessories by Bosch
Important compatibility info
| Placement on Vehicle | Front |
| Tightening Torque | 60 Nm |
| Function | Wiper Motor |
| Service Speed | 27 1/min |
| Protection Type (IP Code) | IP23 |
| Rotation Direction | Anticlockwise rotation |
| Voltage | 24 V |
| Rated Power | 11,3 W |
| Type | Wiper Motor |
Important compatibility info
| Placement on Vehicle | Front |
| Tightening Torque | 60 Nm |
| Function | Wiper Motor |
| Service Speed | 27 1/min |
| Protection Type (IP Code) | IP23 |
| Rotation Direction | Anticlockwise rotation |
| Voltage | 24 V |
| Rated Power | 11,3 W |
| Type | Wiper Motor |
Important compatibility info
| Placement on Vehicle | Fuel Line |
| Operating Mode | Electric |
| Function | Fuel Pump |
| Type | Fuel Pump |
Important compatibility info
| Placement on Vehicle | Fuel Line |
| Operating Mode | Electric |
| Function | Fuel Pump |
| Type | Fuel Pump |
Important compatibility info
| Rated Power | 0.7 kW |
| Rotation Direction | Clockwise rotation |
| Jaw opening angle measurement [Degree] | 135 ° |
| Fastening hole angle measurement [Degree] | 55 ° |
| Thread Size | M10x1.5 |
| Bore Diameter 2 | 11 mm |
| Length | 195 mm |
| Number of mounting bores | 1 |
| Flange Diameter | 70 mm |
| Voltage | 12 V |
| Number of Teeth | 8 |
| Starter Type | Self-supporting |
| Connecting Angle | 55 ° |
| Type | Starter |
| Number of Thread Bores | 1 |
| Function | Starter |
| Pinion Rest Position | 12 mm |
| Position / Degree | links ° |
| Clamp | 30,50 |
Important compatibility info
| Rated Power | 0.7 kW |
| Rotation Direction | Clockwise rotation |
| Jaw opening angle measurement [Degree] | 135 ° |
| Fastening hole angle measurement [Degree] | 55 ° |
| Thread Size | M10x1.5 |
| Bore Diameter 2 | 11 mm |
| Length | 195 mm |
| Number of mounting bores | 1 |
| Flange Diameter | 70 mm |
| Voltage | 12 V |
| Number of Teeth | 8 |
| Starter Type | Self-supporting |
| Connecting Angle | 55 ° |
| Type | Starter |
| Number of Thread Bores | 1 |
| Function | Starter |
| Pinion Rest Position | 12 mm |
| Position / Degree | links ° |
| Clamp | 30,50 |
Important compatibility info
| Replaces | 0281006851 |
| Function | NOx Sensor, urea injection |
| Type | NOx Sensor, urea injection |
Important compatibility info
| Replaces | 0281006851 |
| Function | NOx Sensor, urea injection |
| Type | NOx Sensor, urea injection |
Important compatibility info
| Type | Pressure Accumulator, fuel pressure |
| Connecting Thread 1 | M16x1,5 |
| Function | Pressure Accumulator, fuel pressure |
| Replaces | 0438170051 |
| Surface | Chrome-(VI)- free passivation, Zinc-coated |
| Pressure to | 1.8 bar |
| Connecting Thread 2 | M14x1,5 |
| Length | 139 mm |
| Diameter | 83 mm |
| Material | Sheet Steel |
Important compatibility info
| Type | Pressure Accumulator, fuel pressure |
| Connecting Thread 1 | M16x1,5 |
| Function | Pressure Accumulator, fuel pressure |
| Replaces | 0438170051 |
| Surface | Chrome-(VI)- free passivation, Zinc-coated |
| Pressure to | 1.8 bar |
| Connecting Thread 2 | M14x1,5 |
| Length | 139 mm |
| Diameter | 83 mm |
| Material | Sheet Steel |
Important compatibility info
| Replaces | 1582881057 |
| Placement on Vehicle | in the fuel tank |
| Operating Mode | Electric |
| Type | Fuel Feed Unit |
| Function | Fuel Feed Unit |
| Additional Information 2 | with connector parts |
| Fuel Supply | Fuel level sensor in the main tank |
Important compatibility info
| Replaces | 1582881057 |
| Placement on Vehicle | in the fuel tank |
| Operating Mode | Electric |
| Type | Fuel Feed Unit |
| Function | Fuel Feed Unit |
| Additional Information 2 | with connector parts |
| Fuel Supply | Fuel level sensor in the main tank |
Important compatibility info
| Drill Diameter, up to | 16.5 mm |
| Rotor Style | Perforated, two-piece brake disc, Vented |
| Fulfils ECE norm | ECE-R90 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Height | 64.2 mm |
| Outer diameter | 370 mm |
| Placement on Vehicle | Rear Axle Left |
| Machining | High-carbon |
| Surface | Coated |
| Paired article numbers | 0986479G13 |
| Centering Diameter | 67 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Minimum thickness | 22.4 mm |
| Number of Holes | 5 |
| Brake Disc Thickness | 24 mm |
| Additional Information 2 | with bolts/screws |
Important compatibility info
| Drill Diameter, up to | 16.5 mm |
| Rotor Style | Perforated, two-piece brake disc, Vented |
| Fulfils ECE norm | ECE-R90 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Height | 64.2 mm |
| Outer diameter | 370 mm |
| Placement on Vehicle | Rear Axle Left |
| Machining | High-carbon |
| Surface | Coated |
| Paired article numbers | 0986479G13 |
| Centering Diameter | 67 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Minimum thickness | 22.4 mm |
| Number of Holes | 5 |
| Brake Disc Thickness | 24 mm |
| Additional Information 2 | with bolts/screws |
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Height | 54 mm |
| Outer diameter | 345 mm |
| Additional Information 2 | with bolts/screws |
| Brake Disc Thickness | 26 mm |
| Number of Holes | 5 |
| Minimum thickness | 24 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 67 mm |
| Surface | Coated |
| Machining | High-carbon |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Drill Diameter, up to | 15.3 mm |
| Rotor Style | Perforated, Vented |
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Height | 54 mm |
| Outer diameter | 345 mm |
| Additional Information 2 | with bolts/screws |
| Brake Disc Thickness | 26 mm |
| Number of Holes | 5 |
| Minimum thickness | 24 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 67 mm |
| Surface | Coated |
| Machining | High-carbon |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Drill Diameter, up to | 15.3 mm |
| Rotor Style | Perforated, Vented |
Important compatibility info
| Type | Brake Disc Rotor |
| Additional Information 2 | with bolts/screws |
| Bolt Hole Circle Diameter | 112 mm |
| Outer diameter | 370 mm |
| Placement on Vehicle | Rear Axle Right |
| Function | Brake Disc |
| Centering Diameter | 67 mm |
| Minimum thickness | 22.4 mm |
| Paired article numbers | 0986479G12 |
| Machining | High-carbon |
| Surface | Coated |
| Drill Diameter, up to | 16.5 mm |
| Rotor Style | Perforated, two-piece brake disc, Vented |
| Fulfils ECE norm | ECE-R90 |
| Height | 64.2 mm |
| Brake Disc Thickness | 24 mm |
| Number of Holes | 5 |
Important compatibility info
| Type | Brake Disc Rotor |
| Additional Information 2 | with bolts/screws |
| Bolt Hole Circle Diameter | 112 mm |
| Outer diameter | 370 mm |
| Placement on Vehicle | Rear Axle Right |
| Function | Brake Disc |
| Centering Diameter | 67 mm |
| Minimum thickness | 22.4 mm |
| Paired article numbers | 0986479G12 |
| Machining | High-carbon |
| Surface | Coated |
| Drill Diameter, up to | 16.5 mm |
| Rotor Style | Perforated, two-piece brake disc, Vented |
| Fulfils ECE norm | ECE-R90 |
| Height | 64.2 mm |
| Brake Disc Thickness | 24 mm |
| Number of Holes | 5 |
Important compatibility info
| Voltage | 12 V |
| Rated Power | 2.2 kW |
| Type | Starter |
| Function | Starter |
| Fastening hole angle measurement [Degree] | 40 ° |
| Jaw opening angle measurement [Degree] | 70 ° |
| Starter Type | Self-supporting |
| Bore Diameter 3 | 9.5 mm |
| Pinion Rest Position | 14 mm |
| Connecting Angle | 40 ° |
| Clamp | 30,50 |
| Position / Degree | links ° |
| Number of Thread Bores | 1 |
| Number of mounting bores | 2 |
| Rotation Direction | Clockwise rotation |
| Bore Diameter | 9.5 mm |
| Number of Teeth | 11 |
| Length | 217 mm |
| Thread Size | M8x1.25 |
Important compatibility info
| Voltage | 12 V |
| Rated Power | 2.2 kW |
| Type | Starter |
| Function | Starter |
| Fastening hole angle measurement [Degree] | 40 ° |
| Jaw opening angle measurement [Degree] | 70 ° |
| Starter Type | Self-supporting |
| Bore Diameter 3 | 9.5 mm |
| Pinion Rest Position | 14 mm |
| Connecting Angle | 40 ° |
| Clamp | 30,50 |
| Position / Degree | links ° |
| Number of Thread Bores | 1 |
| Number of mounting bores | 2 |
| Rotation Direction | Clockwise rotation |
| Bore Diameter | 9.5 mm |
| Number of Teeth | 11 |
| Length | 217 mm |
| Thread Size | M8x1.25 |
Important compatibility info
| Function | Particle Sensor |
| Type | Particle Sensor |
Important compatibility info
| Function | Particle Sensor |
| Type | Particle Sensor |
Important compatibility info
| Surface | Chrome-(VI)- free passivation, Zinc-coated |
| Pressure to | 0.6 bar |
| Connecting Thread 1 | M14x1,5 |
| Connecting Thread 2 | M14x1,5 |
| Function | Pressure Accumulator, fuel pressure |
| Diameter | 73 mm |
| Length | 98 mm |
| Type | Pressure Accumulator, fuel pressure |
| Material | Sheet Steel |
| Replaces | 0438170002 |
Important compatibility info
| Surface | Chrome-(VI)- free passivation, Zinc-coated |
| Pressure to | 0.6 bar |
| Connecting Thread 1 | M14x1,5 |
| Connecting Thread 2 | M14x1,5 |
| Function | Pressure Accumulator, fuel pressure |
| Diameter | 73 mm |
| Length | 98 mm |
| Type | Pressure Accumulator, fuel pressure |
| Material | Sheet Steel |
| Replaces | 0438170002 |
Important compatibility info
| Valve type | Control Valve |
| Function | Pressure Control Valve, common rail system |
| Type | Pressure Control Valve, common rail system |
Important compatibility info
| Valve type | Control Valve |
| Function | Pressure Control Valve, common rail system |
| Type | Pressure Control Valve, common rail system |
Important compatibility info
| Rotor Style | two-piece brake disc, Vented |
| Drill Diameter, up to | 16.5 mm |
| Fulfils ECE norm | ECE-R90 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Machining | High-carbon |
| Surface | Coated |
| Centering Diameter | 75 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Minimum thickness | 22.4 mm |
| Number of Holes | 5 |
| Brake Disc Thickness | 24 mm |
| Additional Information 2 | with bolts/screws |
| Outer diameter | 345 mm |
| Height | 66.1 mm |
| Placement on Vehicle | Rear Axle |
Important compatibility info
| Rotor Style | two-piece brake disc, Vented |
| Drill Diameter, up to | 16.5 mm |
| Fulfils ECE norm | ECE-R90 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Machining | High-carbon |
| Surface | Coated |
| Centering Diameter | 75 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Minimum thickness | 22.4 mm |
| Number of Holes | 5 |
| Brake Disc Thickness | 24 mm |
| Additional Information 2 | with bolts/screws |
| Outer diameter | 345 mm |
| Height | 66.1 mm |
| Placement on Vehicle | Rear Axle |
Important compatibility info
| Rated Power | 1.7 kW |
| Voltage | 12 V |
| Number of Teeth | 10. 12. 11 |
| Function | Starter |
| Fastening hole angle measurement [Degree] | 42 ° |
| Starter Type | Floating pinion |
| Bore Diameter 2 | 12.5 mm |
| Pinion Rest Position | 61.8 mm |
| Connecting Angle | 42 ° |
| Clamp | 50, 30 |
| Position / Degree | links ° |
| Flange Diameter | 76.2 mm |
| Number of mounting bores | 2 |
| Rotation Direction | Anticlockwise rotation |
| Bore Diameter | 12.5 mm |
| Length | 255 mm |
| Type | Starter |
Important compatibility info
| Rated Power | 1.7 kW |
| Voltage | 12 V |
| Number of Teeth | 10. 12. 11 |
| Function | Starter |
| Fastening hole angle measurement [Degree] | 42 ° |
| Starter Type | Floating pinion |
| Bore Diameter 2 | 12.5 mm |
| Pinion Rest Position | 61.8 mm |
| Connecting Angle | 42 ° |
| Clamp | 50, 30 |
| Position / Degree | links ° |
| Flange Diameter | 76.2 mm |
| Number of mounting bores | 2 |
| Rotation Direction | Anticlockwise rotation |
| Bore Diameter | 12.5 mm |
| Length | 255 mm |
| Type | Starter |
Important compatibility info
| Voltage | 12 V |
| Fastening hole angle measurement [Degree] | 54 ° |
| Jaw opening angle measurement [Degree] | 120 ° |
| Starter Type | Self-supporting |
| Pinion Rest Position | 21 mm |
| Connecting Angle | 54 ° |
| Clamp | 30,50 |
| Position / Degree | links ° |
| Number of Thread Bores | 2 |
| Flange Diameter | 77 mm |
| Number of mounting bores | 2 |
| Rotation Direction | Clockwise rotation |
| Thread Measurement 1 | M10x1.5 |
| Number of Teeth | 8 |
| Thread Size | M10 |
| Length | 173 mm |
| Rated Power | 0.9 kW |
| Function | Starter |
| Type | Starter |
Important compatibility info
| Voltage | 12 V |
| Fastening hole angle measurement [Degree] | 54 ° |
| Jaw opening angle measurement [Degree] | 120 ° |
| Starter Type | Self-supporting |
| Pinion Rest Position | 21 mm |
| Connecting Angle | 54 ° |
| Clamp | 30,50 |
| Position / Degree | links ° |
| Number of Thread Bores | 2 |
| Flange Diameter | 77 mm |
| Number of mounting bores | 2 |
| Rotation Direction | Clockwise rotation |
| Thread Measurement 1 | M10x1.5 |
| Number of Teeth | 8 |
| Thread Size | M10 |
| Length | 173 mm |
| Rated Power | 0.9 kW |
| Function | Starter |
| Type | Starter |
Important compatibility info
| Placement on Vehicle | in the fuel tank |
| Operating Mode | Electric |
| Fuel Supply | Fuel level sensor in the main tank |
| Additional Information 2 | with connector parts |
| Function | Fuel Feed Unit |
| Type | Fuel Feed Unit |
Important compatibility info
| Placement on Vehicle | in the fuel tank |
| Operating Mode | Electric |
| Fuel Supply | Fuel level sensor in the main tank |
| Additional Information 2 | with connector parts |
| Function | Fuel Feed Unit |
| Type | Fuel Feed Unit |
Important compatibility info
| Rated Power | 2.1 kW |
| Voltage | 12 V |
| Function | Starter |
| Fastening hole angle measurement [Degree] | 90 ° |
| Starter Type | Self-supporting |
| Bore Diameter 2 | 10.4 mm |
| Pinion Rest Position | 36.4 mm |
| Connecting Angle | 90 ° |
| Clamp | 50, 30 |
| Position / Degree | rechts ° |
| Flange Diameter | 89 mm |
| Number of mounting bores | 2 |
| Rotation Direction | Clockwise rotation |
| Bore Diameter | 10.4 mm |
| Number of Teeth | 19 |
| Length | 260 mm |
| Type | Starter |
Important compatibility info
| Rated Power | 2.1 kW |
| Voltage | 12 V |
| Function | Starter |
| Fastening hole angle measurement [Degree] | 90 ° |
| Starter Type | Self-supporting |
| Bore Diameter 2 | 10.4 mm |
| Pinion Rest Position | 36.4 mm |
| Connecting Angle | 90 ° |
| Clamp | 50, 30 |
| Position / Degree | rechts ° |
| Flange Diameter | 89 mm |
| Number of mounting bores | 2 |
| Rotation Direction | Clockwise rotation |
| Bore Diameter | 10.4 mm |
| Number of Teeth | 19 |
| Length | 260 mm |
| Type | Starter |
Important compatibility info
| Fuel Mixture Formation | Common Rail (CR) |
| Additional Information 2 | with seal ring |
| Type | Injector Nozzle |
| Function | Injector Nozzle |
| Replaces | 0445110749 |
Important compatibility info
| Fuel Mixture Formation | Common Rail (CR) |
| Additional Information 2 | with seal ring |
| Type | Injector Nozzle |
| Function | Injector Nozzle |
| Replaces | 0445110749 |
Important compatibility info
| Type | Starter |
| Voltage | 12 V |
| Rated Power | 1 kW |
| Number of mounting bores | 3 |
| Fastening hole angle measurement [Degree] | 40 ° |
| Jaw opening angle measurement [Degree] | 160 ° |
| Starter Type | Self-supporting |
| Pinion Rest Position | 14.7 mm |
| Connecting Angle | 40 ° |
| Clamp | 30 |
| Position / Degree | links ° |
| Number of Thread Bores | 3 |
| Flange Diameter | 74 mm |
| Rotation Direction | Clockwise rotation |
| Thread Measurement 2 | M10x1.5 |
| Thread Measurement 1 | M10x1.5 |
| Number of Teeth | 8 |
| Thread Size | M10 |
| Length | 194 mm |
| Function | Starter |
| Thread size 3 | M10x1.5 |
Important compatibility info
| Type | Starter |
| Voltage | 12 V |
| Rated Power | 1 kW |
| Number of mounting bores | 3 |
| Fastening hole angle measurement [Degree] | 40 ° |
| Jaw opening angle measurement [Degree] | 160 ° |
| Starter Type | Self-supporting |
| Pinion Rest Position | 14.7 mm |
| Connecting Angle | 40 ° |
| Clamp | 30 |
| Position / Degree | links ° |
| Number of Thread Bores | 3 |
| Flange Diameter | 74 mm |
| Rotation Direction | Clockwise rotation |
| Thread Measurement 2 | M10x1.5 |
| Thread Measurement 1 | M10x1.5 |
| Number of Teeth | 8 |
| Thread Size | M10 |
| Length | 194 mm |
| Function | Starter |
| Thread size 3 | M10x1.5 |
Important compatibility info
| Length | 175 mm |
| Voltage | 14 V |
| Pulleys | with multi-belt pulley |
| Plug Type ID | 61 |
| Alternator Charge Current | 85 A |
| Rotation Direction | Clockwise rotation |
| Belt Pulley Diameter | 54 mm |
| Recommended additional repairs | V-Belt/V-Ribbed Belt |
| Alternator type | excl. vacuum pump |
| Number of grooves | 5 |
| Fastening Type | Single pivoted lever |
| Clamp | B+(M6) |
| Type | Alternator |
| Distance from pulley to alternator | 61.2 mm |
| Function | Alternator |
| Replaces | 0124225020 |
Important compatibility info
| Length | 175 mm |
| Voltage | 14 V |
| Pulleys | with multi-belt pulley |
| Plug Type ID | 61 |
| Alternator Charge Current | 85 A |
| Rotation Direction | Clockwise rotation |
| Belt Pulley Diameter | 54 mm |
| Recommended additional repairs | V-Belt/V-Ribbed Belt |
| Alternator type | excl. vacuum pump |
| Number of grooves | 5 |
| Fastening Type | Single pivoted lever |
| Clamp | B+(M6) |
| Type | Alternator |
| Distance from pulley to alternator | 61.2 mm |
| Function | Alternator |
| Replaces | 0124225020 |
Important compatibility info
| Type | NOx Sensor, urea injection |
| Function | NOx Sensor, urea injection |
| Replaces | 0281007702 |
Important compatibility info
| Type | NOx Sensor, urea injection |
| Function | NOx Sensor, urea injection |
| Replaces | 0281007702 |
Important compatibility info
| Position / Degree | links ° |
| Flange Diameter | 76.2 mm |
| Type | Starter |
| Bore Diameter 2 | 9 mm |
| Jaw opening angle measurement [Degree] | 45 ° |
| Pinion Rest Position | 4.2 mm |
| Connecting Angle | 37 ° |
| Clamp | 30,50 |
| Number of mounting bores | 3 |
| Length | 215 mm |
| Voltage | 12 V |
| Number of Teeth | 11. 10 |
| Bore Diameter | 9 mm |
| Rotation Direction | Clockwise rotation |
| Rated Power | 1.4 kW |
| Function | Starter |
| Bore Diameter 3 | 9 mm |
| Starter Type | Self-supporting |
| Fastening hole angle measurement [Degree] | 37 ° |
Important compatibility info
| Position / Degree | links ° |
| Flange Diameter | 76.2 mm |
| Type | Starter |
| Bore Diameter 2 | 9 mm |
| Jaw opening angle measurement [Degree] | 45 ° |
| Pinion Rest Position | 4.2 mm |
| Connecting Angle | 37 ° |
| Clamp | 30,50 |
| Number of mounting bores | 3 |
| Length | 215 mm |
| Voltage | 12 V |
| Number of Teeth | 11. 10 |
| Bore Diameter | 9 mm |
| Rotation Direction | Clockwise rotation |
| Rated Power | 1.4 kW |
| Function | Starter |
| Bore Diameter 3 | 9 mm |
| Starter Type | Self-supporting |
| Fastening hole angle measurement [Degree] | 37 ° |
Important compatibility info
| Voltage | 12 V |
| Rated Power | 1.4 kW |
| Fastening hole angle measurement [Degree] | 77 ° |
| Jaw opening angle measurement [Degree] | 77 ° |
| Starter Type | Self-supporting |
| Pinion Rest Position | 22.9 mm |
| Connecting Angle | 77 ° |
| Clamp | 50, 30 |
| Position / Degree | rechts ° |
| Number of Thread Bores | 1 |
| Flange Diameter | 64 mm |
| Number of mounting bores | 1 |
| Rotation Direction | Clockwise rotation |
| Bore Diameter | 8.5 mm |
| Thread Measurement 1 | M8x1.25 |
| Number of Teeth | 10 |
| Length | 210 mm |
| Function | Starter |
| Type | Starter |
Important compatibility info
| Voltage | 12 V |
| Rated Power | 1.4 kW |
| Fastening hole angle measurement [Degree] | 77 ° |
| Jaw opening angle measurement [Degree] | 77 ° |
| Starter Type | Self-supporting |
| Pinion Rest Position | 22.9 mm |
| Connecting Angle | 77 ° |
| Clamp | 50, 30 |
| Position / Degree | rechts ° |
| Number of Thread Bores | 1 |
| Flange Diameter | 64 mm |
| Number of mounting bores | 1 |
| Rotation Direction | Clockwise rotation |
| Bore Diameter | 8.5 mm |
| Thread Measurement 1 | M8x1.25 |
| Number of Teeth | 10 |
| Length | 210 mm |
| Function | Starter |
| Type | Starter |
Important compatibility info
| Voltage | 12 V |
| Thread Size | M10x1.5 |
| Jaw opening angle measurement [Degree] | 35 ° |
| Function | Starter |
| Type | Starter |
| Pinion Rest Position | -5.5 mm |
| Connecting Angle | 55 ° |
| Clamp | 30,50 |
| Position / Degree | links ° |
| Number of Thread Bores | 3 |
| Rated Power | 1.9 kW |
| Rotation Direction | Clockwise rotation |
| Length | 238 mm |
| Fastening hole angle measurement [Degree] | 55 ° |
| Starter Type | Self-supporting |
| Thread Measurement 2 | M10x1.5 |
| Number of Teeth | 12. 11 |
| Thread Measurement 1 | M10x1.5 |
Important compatibility info
| Voltage | 12 V |
| Thread Size | M10x1.5 |
| Jaw opening angle measurement [Degree] | 35 ° |
| Function | Starter |
| Type | Starter |
| Pinion Rest Position | -5.5 mm |
| Connecting Angle | 55 ° |
| Clamp | 30,50 |
| Position / Degree | links ° |
| Number of Thread Bores | 3 |
| Rated Power | 1.9 kW |
| Rotation Direction | Clockwise rotation |
| Length | 238 mm |
| Fastening hole angle measurement [Degree] | 55 ° |
| Starter Type | Self-supporting |
| Thread Measurement 2 | M10x1.5 |
| Number of Teeth | 12. 11 |
| Thread Measurement 1 | M10x1.5 |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023
























