Car Parts & Accessories by Bosch
Important compatibility info
| Placement on Vehicle | before exhaust turbocharger |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
Important compatibility info
| Recommended additional repairs | Air Filter |
| Type | Mass Air Flow Sensor |
| Function | Mass Air Flow Sensor |
Important compatibility info
| Recommended additional repairs | Air Filter |
| Type | Mass Air Flow Sensor |
| Function | Mass Air Flow Sensor |
Important compatibility info
| Length | 242 mm |
| Height | 190 mm |
| Width | 175 mm |
| Voltage | 12 V |
| Ampere-Hours | 56 Ah |
| Cold-test Current, EN | 480 A |
| Function | Starter Battery |
| Terminal Layout | Positive Front Right |
| Cold Cranking Amperage (CCA) | 480 A |
| Extra Description | S3 |
| Type | Starter Battery |
| Battery Type Code | 027 |
| Key Words | 480A; 56Ah; 3Yr Warranty; 242x175x190 |
| Hold-down Type | B03 |
| Warranty | 3 year warranty |
| Terminal Type | 1 |
Important compatibility info
| Length | 242 mm |
| Height | 190 mm |
| Width | 175 mm |
| Voltage | 12 V |
| Ampere-Hours | 56 Ah |
| Cold-test Current, EN | 480 A |
| Function | Starter Battery |
| Terminal Layout | Positive Front Right |
| Cold Cranking Amperage (CCA) | 480 A |
| Extra Description | S3 |
| Type | Starter Battery |
| Battery Type Code | 027 |
| Key Words | 480A; 56Ah; 3Yr Warranty; 242x175x190 |
| Hold-down Type | B03 |
| Warranty | 3 year warranty |
| Terminal Type | 1 |
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Width | 31.7 mm |
| Additional Information | with accessories, with wheel brake cylinder |
| Mounting Type | Pre-assembled |
| Adjustment | with automatic adjustment |
| Brake Pad | with lining |
| Inner Brake Drum Diameter | 200 mm |
| Type | Brake Shoe Set |
| Function | Brake Shoe Set |
| Extra Description | KIT SUPERPRO |
| Piston Diameter | 19.05 mm |
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Width | 31.7 mm |
| Additional Information | with accessories, with wheel brake cylinder |
| Mounting Type | Pre-assembled |
| Adjustment | with automatic adjustment |
| Brake Pad | with lining |
| Inner Brake Drum Diameter | 200 mm |
| Type | Brake Shoe Set |
| Function | Brake Shoe Set |
| Extra Description | KIT SUPERPRO |
| Piston Diameter | 19.05 mm |
Important compatibility info
| Operating Mode | Electric |
| Placement on Vehicle | Fuel Line |
| Fit | Universal |
| Function | Fuel Pump |
| Type | Fuel Pump |
Important compatibility info
| Operating Mode | Electric |
| Placement on Vehicle | Fuel Line |
| Fit | Universal |
| Function | Fuel Pump |
| Type | Fuel Pump |
Important compatibility info
| Placement on Vehicle | Front Axle |
| Height | 51.5 mm |
| Outer diameter | 280 mm |
| Brake Disc Thickness | 25 mm |
| Number of Holes | 5 |
| Minimum thickness | 23 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 68 mm |
| Surface | Oiled |
| Type | Brake Disc Rotor |
| Fulfils ECE norm | ECE-R90 |
| Function | Brake Disc |
| Drill Diameter, up to | 13.3 mm |
| Rotor Style | Vented |
Important compatibility info
| Placement on Vehicle | Front Axle |
| Height | 51.5 mm |
| Outer diameter | 280 mm |
| Brake Disc Thickness | 25 mm |
| Number of Holes | 5 |
| Minimum thickness | 23 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 68 mm |
| Surface | Oiled |
| Type | Brake Disc Rotor |
| Fulfils ECE norm | ECE-R90 |
| Function | Brake Disc |
| Drill Diameter, up to | 13.3 mm |
| Rotor Style | Vented |
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Height | 120.5 mm |
| Outer diameter | 323.7 mm |
| Brake Disc Thickness | 30 mm |
| Number of Holes | 6 |
| Minimum thickness | 26 mm |
| Bolt Hole Circle Diameter | 192 mm |
| Centering Diameter | 117 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Drill Diameter, up to | 14 mm |
| Rotor Style | Vented |
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Height | 120.5 mm |
| Outer diameter | 323.7 mm |
| Brake Disc Thickness | 30 mm |
| Number of Holes | 6 |
| Minimum thickness | 26 mm |
| Bolt Hole Circle Diameter | 192 mm |
| Centering Diameter | 117 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Drill Diameter, up to | 14 mm |
| Rotor Style | Vented |
Important compatibility info
| Function | Ignition Coil |
| Replaces | 0986221096 |
| Type | Ignition Coil |
Important compatibility info
| Function | Ignition Coil |
| Replaces | 0986221096 |
| Type | Ignition Coil |
Important compatibility info
| Recommended additional repairs | Air Filter |
| Type | Mass Air Flow Sensor |
| Function | Mass Air Flow Sensor |
| Replaces | 0280218032 |
Important compatibility info
| Recommended additional repairs | Air Filter |
| Type | Mass Air Flow Sensor |
| Function | Mass Air Flow Sensor |
| Replaces | 0280218032 |
Important compatibility info
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Height | 67.5 mm |
| Outer diameter | 306.7 mm |
| Brake Disc Thickness | 16 mm |
| Number of Holes | 5 |
| Minimum thickness | 15 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 62.1 mm |
| Surface | Oiled |
| Type | Brake Disc Rotor |
| Fulfils ECE norm | ECE-R90 |
| Function | Brake Disc |
| Drill Diameter, up to | 14.8 mm |
| Rotor Style | Vented |
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Height | 67.5 mm |
| Outer diameter | 306.7 mm |
| Brake Disc Thickness | 16 mm |
| Number of Holes | 5 |
| Minimum thickness | 15 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 62.1 mm |
| Surface | Oiled |
| Type | Brake Disc Rotor |
| Fulfils ECE norm | ECE-R90 |
| Function | Brake Disc |
| Drill Diameter, up to | 14.8 mm |
| Rotor Style | Vented |
Important compatibility info
| Placement on Vehicle | Front Axle |
| Height | 88.1 mm |
| Width | 214.1 mm |
| Material | Low-Metallic |
| Thickness | 16.9 mm |
| Inspection Tag | ECE-R90 |
| WVA Number | 25908 |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Part number of recommended accessories | 1987473583, 1987473604, 1987473599, 1987473598 |
Important compatibility info
| Placement on Vehicle | Front Axle |
| Height | 88.1 mm |
| Width | 214.1 mm |
| Material | Low-Metallic |
| Thickness | 16.9 mm |
| Inspection Tag | ECE-R90 |
| WVA Number | 25908 |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Part number of recommended accessories | 1987473583, 1987473604, 1987473599, 1987473598 |
Important compatibility info
| Height | 105.9 mm |
| Width | 185 mm |
| Material | Low-Metallic |
| Thickness | 20.2 mm |
| Additional Information 2 | with anti-squeak plate, with mounting manual |
| Inspection Tag | ECE-R90 |
| WVA Number | 22441 |
| Type | Brake Pad Set, disc brake |
| Part number of recommended accessories | 1987473613 |
| Function | Brake Pad Set, disc brake |
Important compatibility info
| Height | 105.9 mm |
| Width | 185 mm |
| Material | Low-Metallic |
| Thickness | 20.2 mm |
| Additional Information 2 | with anti-squeak plate, with mounting manual |
| Inspection Tag | ECE-R90 |
| WVA Number | 22441 |
| Type | Brake Pad Set, disc brake |
| Part number of recommended accessories | 1987473613 |
| Function | Brake Pad Set, disc brake |
Important compatibility info
| Outer diameter | 280 mm |
| Height | 47 mm |
| Minimum thickness | 20 mm |
| Brake Disc Thickness | 22 mm |
| Type | Brake Disc Rotor |
| Machining | High-carbon |
| Function | Brake Disc |
| Fulfils ECE norm | ECE-R90 |
| Rotor Style | Vented |
| Drill Diameter, up to | 12.7 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Surface | Coated |
| Centering Diameter | 62 mm |
| Number of Holes | 5 |
| Placement on Vehicle | Front Axle |
Important compatibility info
| Outer diameter | 280 mm |
| Height | 47 mm |
| Minimum thickness | 20 mm |
| Brake Disc Thickness | 22 mm |
| Type | Brake Disc Rotor |
| Machining | High-carbon |
| Function | Brake Disc |
| Fulfils ECE norm | ECE-R90 |
| Rotor Style | Vented |
| Drill Diameter, up to | 12.7 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Surface | Coated |
| Centering Diameter | 62 mm |
| Number of Holes | 5 |
| Placement on Vehicle | Front Axle |
Important compatibility info
| Function | Fuel Feed Unit |
| Operating Mode | Electric |
| Placement on Vehicle | in the fuel tank |
| Type | Fuel Feed Unit |
Important compatibility info
| Function | Fuel Feed Unit |
| Operating Mode | Electric |
| Placement on Vehicle | in the fuel tank |
| Type | Fuel Feed Unit |
Important compatibility info
| Overall Length | 330 mm |
| Number of circuits | 4 |
| Function | Oxygen Sensor |
| Placement on Vehicle | after catalytic converter |
| Type | Oxygen Sensor |
Important compatibility info
| Overall Length | 330 mm |
| Number of circuits | 4 |
| Function | Oxygen Sensor |
| Placement on Vehicle | after catalytic converter |
| Type | Oxygen Sensor |
Important compatibility info
| Glow Plug Type | Pencil-type Glow Plug, after-glow capable |
| Function | Glow Plug |
| Length | 170 mm |
| Extra Description | Duraspeed |
| Type | Glow Plug |
| Thread Size | M 10 x 1,25 |
| Voltage | 11 V |
| Spanner Size | 9 |
| Port / Connector type | PIN |
| Fitting Depth | 31 mm |
| Cone Pitch | 93 |
| Tightening torque to | 15 Nm |
| Tightening torque from | 0 Nm |
Important compatibility info
| Glow Plug Type | Pencil-type Glow Plug, after-glow capable |
| Function | Glow Plug |
| Length | 170 mm |
| Extra Description | Duraspeed |
| Type | Glow Plug |
| Thread Size | M 10 x 1,25 |
| Voltage | 11 V |
| Spanner Size | 9 |
| Port / Connector type | PIN |
| Fitting Depth | 31 mm |
| Cone Pitch | 93 |
| Tightening torque to | 15 Nm |
| Tightening torque from | 0 Nm |
Important compatibility info
| Height | 55.4 mm |
| Outer diameter | 300.1 mm |
| Additional Information 2 | with bolts/screws |
| Brake Disc Thickness | 22 mm |
| Number of Holes | 5 |
| Minimum thickness | 19.4 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 67 mm |
| Surface | Coated |
| Machining | Alloyed/High-carbon |
| Type | Brake Disc Rotor |
| Fulfils ECE norm | ECE-R90 |
| Function | Brake Disc |
| Drill Diameter, up to | 13.2 mm |
| Rotor Style | Vented |
Important compatibility info
| Height | 55.4 mm |
| Outer diameter | 300.1 mm |
| Additional Information 2 | with bolts/screws |
| Brake Disc Thickness | 22 mm |
| Number of Holes | 5 |
| Minimum thickness | 19.4 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 67 mm |
| Surface | Coated |
| Machining | Alloyed/High-carbon |
| Type | Brake Disc Rotor |
| Fulfils ECE norm | ECE-R90 |
| Function | Brake Disc |
| Drill Diameter, up to | 13.2 mm |
| Rotor Style | Vented |
Important compatibility info
| Function | Ignition Coil |
| Type | Ignition Coil |
| Rated Voltage | 12 V |
Important compatibility info
| Function | Ignition Coil |
| Type | Ignition Coil |
| Rated Voltage | 12 V |
Important compatibility info
| Centering Diameter | 68 mm |
| Outer diameter | 296.2 mm |
| Placement on Vehicle | Front Axle |
| Drill Diameter, up to | 12.8 mm |
| Rotor Style | Vented |
| Function | Brake Disc |
| Fulfils ECE norm | ECE-R90 |
| Surface | Oiled |
| Bolt Hole Circle Diameter | 114.3 mm |
| Minimum thickness | 24 mm |
| Number of Holes | 5 |
| Brake Disc Thickness | 26 mm |
| Height | 44 mm |
| Type | Brake Disc Rotor |
Important compatibility info
| Centering Diameter | 68 mm |
| Outer diameter | 296.2 mm |
| Placement on Vehicle | Front Axle |
| Drill Diameter, up to | 12.8 mm |
| Rotor Style | Vented |
| Function | Brake Disc |
| Fulfils ECE norm | ECE-R90 |
| Surface | Oiled |
| Bolt Hole Circle Diameter | 114.3 mm |
| Minimum thickness | 24 mm |
| Number of Holes | 5 |
| Brake Disc Thickness | 26 mm |
| Height | 44 mm |
| Type | Brake Disc Rotor |
Important compatibility info
| Function | Dosing Module, urea injection |
| Type | Dosing Module, urea injection |
Important compatibility info
| Function | Dosing Module, urea injection |
| Type | Dosing Module, urea injection |
Important compatibility info
| Glow Plug Type | Pencil-type Glow Plug, after-glow capable |
| Function | Glow Plug |
| Length | 160 mm |
| Extra Description | Duraspeed |
| Type | Glow Plug |
| Thread Size | M 10 x 1,25 |
| Voltage | 11 V |
| Spanner Size | 9 |
| Port / Connector type | PIN |
| Fitting Depth | 28 mm |
| Cone Pitch | 93 |
| Tightening torque to | 15 Nm |
| Tightening torque from | 0 Nm |
Important compatibility info
| Glow Plug Type | Pencil-type Glow Plug, after-glow capable |
| Function | Glow Plug |
| Length | 160 mm |
| Extra Description | Duraspeed |
| Type | Glow Plug |
| Thread Size | M 10 x 1,25 |
| Voltage | 11 V |
| Spanner Size | 9 |
| Port / Connector type | PIN |
| Fitting Depth | 28 mm |
| Cone Pitch | 93 |
| Tightening torque to | 15 Nm |
| Tightening torque from | 0 Nm |
Important compatibility info
| Number of circuits | 4 |
| Function | Oxygen Sensor |
| Type | Oxygen Sensor |
Important compatibility info
| Number of circuits | 4 |
| Function | Oxygen Sensor |
| Type | Oxygen Sensor |
Important compatibility info
| Machining | High-carbon |
| Type | Brake Disc Rotor |
| Fulfils ECE norm | ECE-R90 |
| Outer diameter | 350 mm |
| Centering Diameter | 72 mm |
| Surface | Coated |
| Function | Brake Disc |
| Drill Diameter, up to | 17 mm |
| Rotor Style | Vented |
| Minimum thickness | 30.5 mm |
| Height | 54.5 mm |
| Bolt Hole Circle Diameter | 127 mm |
| Number of Holes | 5 |
| Brake Disc Thickness | 32 mm |
Important compatibility info
| Machining | High-carbon |
| Type | Brake Disc Rotor |
| Fulfils ECE norm | ECE-R90 |
| Outer diameter | 350 mm |
| Centering Diameter | 72 mm |
| Surface | Coated |
| Function | Brake Disc |
| Drill Diameter, up to | 17 mm |
| Rotor Style | Vented |
| Minimum thickness | 30.5 mm |
| Height | 54.5 mm |
| Bolt Hole Circle Diameter | 127 mm |
| Number of Holes | 5 |
| Brake Disc Thickness | 32 mm |
Important compatibility info
| Number of circuits | 4 |
| Function | Oxygen Sensor |
| Overall Length | 750 mm |
| Type | Oxygen Sensor |
| Placement on Vehicle | after catalytic converter |
Important compatibility info
| Number of circuits | 4 |
| Function | Oxygen Sensor |
| Overall Length | 750 mm |
| Type | Oxygen Sensor |
| Placement on Vehicle | after catalytic converter |
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Height | 74.6 mm |
| Outer diameter | 294 mm |
| Additional Information 2 | with bolts/screws |
| Brake Disc Thickness | 19 mm |
| Number of Holes | 5 |
| Minimum thickness | 17.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 75 mm |
| Surface | Coated |
| Machining | High-carbon |
| Type | Brake Disc Rotor |
| Fulfils ECE norm | ECE-R90 |
| Function | Brake Disc |
| Drill Diameter, up to | 14.8 mm |
| Rotor Style | Vented |
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Height | 74.6 mm |
| Outer diameter | 294 mm |
| Additional Information 2 | with bolts/screws |
| Brake Disc Thickness | 19 mm |
| Number of Holes | 5 |
| Minimum thickness | 17.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 75 mm |
| Surface | Coated |
| Machining | High-carbon |
| Type | Brake Disc Rotor |
| Fulfils ECE norm | ECE-R90 |
| Function | Brake Disc |
| Drill Diameter, up to | 14.8 mm |
| Rotor Style | Vented |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

























