Car Parts & Accessories by Bosch
Important compatibility info
| Function | High-pressure Pump |
| Type | High-pressure Pump |
Important compatibility info
| Placement on Vehicle | in the fuel tank |
| Operating Mode | Electric |
| Function | Fuel Feed Unit |
| Type | Fuel Feed Unit |
Important compatibility info
| Placement on Vehicle | in the fuel tank |
| Operating Mode | Electric |
| Function | Fuel Feed Unit |
| Type | Fuel Feed Unit |
Important compatibility info
| Type | High-pressure Pump |
| Function | High-pressure Pump |
Important compatibility info
| Type | High-pressure Pump |
| Function | High-pressure Pump |
Important compatibility info
| Rated Power | 1.7 kW |
| Position / Degree | links ° |
| Clamp | 50, 30 |
| Connecting Angle | 48 ° |
| Number of mounting bores | 2 |
| Flange Diameter | 60 mm |
| Type | Starter |
| Rotation Direction | Clockwise rotation |
| Pinion Rest Position | 14 mm |
| Thread Measurement 2 | M8x1.25 |
| Number of Teeth | 11 |
| Voltage | 12 V |
| Length | 227 mm |
| Starter Type | Self-supporting |
| Function | Starter |
| Fastening hole angle measurement [Degree] | 48 ° |
| Number of Thread Bores | 2 |
| Thread size 3 | M8x1.25 |
| Jaw opening angle measurement [Degree] | 75 ° |
Important compatibility info
| Rated Power | 1.7 kW |
| Position / Degree | links ° |
| Clamp | 50, 30 |
| Connecting Angle | 48 ° |
| Number of mounting bores | 2 |
| Flange Diameter | 60 mm |
| Type | Starter |
| Rotation Direction | Clockwise rotation |
| Pinion Rest Position | 14 mm |
| Thread Measurement 2 | M8x1.25 |
| Number of Teeth | 11 |
| Voltage | 12 V |
| Length | 227 mm |
| Starter Type | Self-supporting |
| Function | Starter |
| Fastening hole angle measurement [Degree] | 48 ° |
| Number of Thread Bores | 2 |
| Thread size 3 | M8x1.25 |
| Jaw opening angle measurement [Degree] | 75 ° |
Important compatibility info
| Placement on Vehicle | in the fuel tank |
| Operating Mode | Electric |
| Type | Fuel Feed Unit |
| Function | Fuel Feed Unit |
Important compatibility info
| Placement on Vehicle | in the fuel tank |
| Operating Mode | Electric |
| Type | Fuel Feed Unit |
| Function | Fuel Feed Unit |
Important compatibility info
| Length | 179 mm |
| Voltage | 12 V |
| Number of Teeth | 10 |
| Thread Measurement 2 | M8X1,25 |
| Bore Diameter | 12 mm |
| Rotation Direction | Clockwise rotation |
| Rated Power | 1 kW |
| Number of mounting bores | 2 |
| Flange Diameter | 72 mm |
| Number of Thread Bores | 1 |
| Position / Degree | links ° |
| Clamp | 50, 30 |
| Connecting Angle | 38 ° |
| Pinion Rest Position | 13.5 mm |
| Type | Starter |
| Bore Diameter 2 | 10 mm |
| Starter Type | Self-supporting |
| Function | Starter |
| Jaw opening angle measurement [Degree] | 55 ° |
| Fastening hole angle measurement [Degree] | 38 ° |
Important compatibility info
| Length | 179 mm |
| Voltage | 12 V |
| Number of Teeth | 10 |
| Thread Measurement 2 | M8X1,25 |
| Bore Diameter | 12 mm |
| Rotation Direction | Clockwise rotation |
| Rated Power | 1 kW |
| Number of mounting bores | 2 |
| Flange Diameter | 72 mm |
| Number of Thread Bores | 1 |
| Position / Degree | links ° |
| Clamp | 50, 30 |
| Connecting Angle | 38 ° |
| Pinion Rest Position | 13.5 mm |
| Type | Starter |
| Bore Diameter 2 | 10 mm |
| Starter Type | Self-supporting |
| Function | Starter |
| Jaw opening angle measurement [Degree] | 55 ° |
| Fastening hole angle measurement [Degree] | 38 ° |
Important compatibility info
| Voltage | 14 V |
| Alternator Charge Current | 80 A |
| Recommended additional repairs | V-Belt/V-Ribbed Belt |
| Alternator type | excl. vacuum pump |
| Type | Alternator |
| Function | Alternator |
| Distance from pulley to alternator | 42.5 mm |
| Clamp | B1+(M8), L, DFM |
| Fastening Type | Double Pivot Lever |
| Number of grooves | 6 |
| Belt Pulley Diameter | 54 mm |
| Rotation Direction | Clockwise rotation |
| Plug Type ID | PL72 |
| Pulleys | with multi-belt pulley |
| Length | 170 mm |
Important compatibility info
| Voltage | 14 V |
| Alternator Charge Current | 80 A |
| Recommended additional repairs | V-Belt/V-Ribbed Belt |
| Alternator type | excl. vacuum pump |
| Type | Alternator |
| Function | Alternator |
| Distance from pulley to alternator | 42.5 mm |
| Clamp | B1+(M8), L, DFM |
| Fastening Type | Double Pivot Lever |
| Number of grooves | 6 |
| Belt Pulley Diameter | 54 mm |
| Rotation Direction | Clockwise rotation |
| Plug Type ID | PL72 |
| Pulleys | with multi-belt pulley |
| Length | 170 mm |
Important compatibility info
| Rated Power | 1.4 kW |
| Function | Starter |
| Fastening hole angle measurement [Degree] | 40 ° |
| Jaw opening angle measurement [Degree] | 140 ° |
| Starter Type | Self-supporting |
| Pinion Rest Position | -0.7 mm |
| Connecting Angle | 40 ° |
| Clamp | 50, 30 |
| Position / Degree | rechts ° |
| Number of Thread Bores | 2 |
| Flange Diameter | 76.2 mm |
| Number of mounting bores | 1 |
| Rotation Direction | Clockwise rotation |
| Bore Diameter | 10 mm |
| Thread Measurement 2 | M10x1.5 |
| Thread Measurement 1 | M10x1.5 |
| Number of Teeth | 9 |
| Length | 241 mm |
| Voltage | 12 V |
| Type | Starter |
Important compatibility info
| Rated Power | 1.4 kW |
| Function | Starter |
| Fastening hole angle measurement [Degree] | 40 ° |
| Jaw opening angle measurement [Degree] | 140 ° |
| Starter Type | Self-supporting |
| Pinion Rest Position | -0.7 mm |
| Connecting Angle | 40 ° |
| Clamp | 50, 30 |
| Position / Degree | rechts ° |
| Number of Thread Bores | 2 |
| Flange Diameter | 76.2 mm |
| Number of mounting bores | 1 |
| Rotation Direction | Clockwise rotation |
| Bore Diameter | 10 mm |
| Thread Measurement 2 | M10x1.5 |
| Thread Measurement 1 | M10x1.5 |
| Number of Teeth | 9 |
| Length | 241 mm |
| Voltage | 12 V |
| Type | Starter |
Important compatibility info
| Rated Power | 2.2 kW |
| Function | Starter |
| Fastening hole angle measurement [Degree] | 48 ° |
| Jaw opening angle measurement [Degree] | 37 ° |
| Starter Type | Self-supporting |
| Pinion Rest Position | 14.4 mm |
| Connecting Angle | 48 ° |
| Clamp | 30 |
| Position / Degree | links ° |
| Number of Thread Bores | 3 |
| Flange Diameter | 76 mm |
| Rotation Direction | Clockwise rotation |
| Thread Measurement 2 | M10x1.5 |
| Thread Measurement 1 | M10x1.5 |
| Number of Teeth | 10 |
| Thread Size | M10 |
| Length | 252 mm |
| Voltage | 12 V |
| Type | Starter |
| Number of mounting bores | 3 |
Important compatibility info
| Rated Power | 2.2 kW |
| Function | Starter |
| Fastening hole angle measurement [Degree] | 48 ° |
| Jaw opening angle measurement [Degree] | 37 ° |
| Starter Type | Self-supporting |
| Pinion Rest Position | 14.4 mm |
| Connecting Angle | 48 ° |
| Clamp | 30 |
| Position / Degree | links ° |
| Number of Thread Bores | 3 |
| Flange Diameter | 76 mm |
| Rotation Direction | Clockwise rotation |
| Thread Measurement 2 | M10x1.5 |
| Thread Measurement 1 | M10x1.5 |
| Number of Teeth | 10 |
| Thread Size | M10 |
| Length | 252 mm |
| Voltage | 12 V |
| Type | Starter |
| Number of mounting bores | 3 |
Important compatibility info
| Pulleys | with freewheel belt pulley |
| Alternator Charge Current | 90 A |
| Recommended additional repairs | V-Belt/V-Ribbed Belt |
| Alternator type | excl. vacuum pump |
| Function | Alternator |
| Distance from pulley to alternator | 41.2 mm |
| Clamp | B+(M8),D+(M5) |
| Fastening Type | Direct fastening |
| Number of grooves | 6 |
| Belt Pulley Diameter | 54 mm |
| Rotation Direction | Clockwise rotation |
| Length | 197 mm |
| Voltage | 14 V |
| Type | Alternator |
Important compatibility info
| Pulleys | with freewheel belt pulley |
| Alternator Charge Current | 90 A |
| Recommended additional repairs | V-Belt/V-Ribbed Belt |
| Alternator type | excl. vacuum pump |
| Function | Alternator |
| Distance from pulley to alternator | 41.2 mm |
| Clamp | B+(M8),D+(M5) |
| Fastening Type | Direct fastening |
| Number of grooves | 6 |
| Belt Pulley Diameter | 54 mm |
| Rotation Direction | Clockwise rotation |
| Length | 197 mm |
| Voltage | 14 V |
| Type | Alternator |
Important compatibility info
| Type | Dosing Module, urea injection |
| Function | Dosing Module, urea injection |
Important compatibility info
| Type | Dosing Module, urea injection |
| Function | Dosing Module, urea injection |
Important compatibility info
| Alternator Charge Current | 70 A |
| Recommended additional repairs | V-Belt/V-Ribbed Belt |
| Alternator type | excl. vacuum pump |
| Function | Alternator |
| Distance from pulley to alternator | 54.6 mm |
| Clamp | D+(M5), B2+(M8) |
| Fastening Type | Double Pivot Lever |
| Number of grooves | 5 |
| Belt Pulley Diameter | 54 mm |
| Rotation Direction | Clockwise rotation |
| Pulleys | with multi-belt pulley |
| Length | 160 mm |
| Voltage | 14 V |
| Type | Alternator |
Important compatibility info
| Alternator Charge Current | 70 A |
| Recommended additional repairs | V-Belt/V-Ribbed Belt |
| Alternator type | excl. vacuum pump |
| Function | Alternator |
| Distance from pulley to alternator | 54.6 mm |
| Clamp | D+(M5), B2+(M8) |
| Fastening Type | Double Pivot Lever |
| Number of grooves | 5 |
| Belt Pulley Diameter | 54 mm |
| Rotation Direction | Clockwise rotation |
| Pulleys | with multi-belt pulley |
| Length | 160 mm |
| Voltage | 14 V |
| Type | Alternator |
Important compatibility info
| Voltage | 14 V |
| Alternator Charge Current | 105 A |
| Recommended additional repairs | V-Belt/V-Ribbed Belt |
| Alternator type | excl. vacuum pump |
| Distance from pulley to alternator | 10 mm |
| Fastening Type | Foot-mounted |
| Number of grooves | 6 |
| Belt Pulley Diameter | 48 mm |
| Rotation Direction | Clockwise rotation |
| Pulleys | with multi-belt pulley |
| Length | 165 mm |
| Function | Alternator |
| Type | Alternator |
| Plug Type ID | 57 |
| Clamp | B+(M6) |
Important compatibility info
| Voltage | 14 V |
| Alternator Charge Current | 105 A |
| Recommended additional repairs | V-Belt/V-Ribbed Belt |
| Alternator type | excl. vacuum pump |
| Distance from pulley to alternator | 10 mm |
| Fastening Type | Foot-mounted |
| Number of grooves | 6 |
| Belt Pulley Diameter | 48 mm |
| Rotation Direction | Clockwise rotation |
| Pulleys | with multi-belt pulley |
| Length | 165 mm |
| Function | Alternator |
| Type | Alternator |
| Plug Type ID | 57 |
| Clamp | B+(M6) |
Important compatibility info
| Function | High-pressure Pump |
| Type | High-pressure Pump |
Important compatibility info
| Function | High-pressure Pump |
| Type | High-pressure Pump |
Important compatibility info
| Type | Alternator |
| Function | Alternator |
| Voltage | 24 V |
| Alternator Charge Current | 100 A |
| Rotation Direction | Clockwise rotation |
| Recommended additional repairs | V-Belt/V-Ribbed Belt |
| Alternator type | excl. vacuum pump |
| Fastening Type | Double Pivot Lever |
| Pulleys | without belt pulley |
| Plug Type ID | 82 |
| Clamp | B+(M8) |
| Length | 194 mm |
| Replaces | 1986A00518 |
Important compatibility info
| Type | Alternator |
| Function | Alternator |
| Voltage | 24 V |
| Alternator Charge Current | 100 A |
| Rotation Direction | Clockwise rotation |
| Recommended additional repairs | V-Belt/V-Ribbed Belt |
| Alternator type | excl. vacuum pump |
| Fastening Type | Double Pivot Lever |
| Pulleys | without belt pulley |
| Plug Type ID | 82 |
| Clamp | B+(M8) |
| Length | 194 mm |
| Replaces | 1986A00518 |
Important compatibility info
| Voltage | 14 V |
| Pulleys | without belt pulley |
| Alternator Charge Current | 105 A |
| Recommended additional repairs | V-Belt/V-Ribbed Belt |
| Alternator type | excl. vacuum pump |
| Type | Alternator |
| Fastening Type | Double Pivot Lever |
| Rotation Direction | Clockwise rotation |
| Length | 162 mm |
| Function | Alternator |
| Plug Type ID | 57 |
| Clamp | B+(M8) |
Important compatibility info
| Voltage | 14 V |
| Pulleys | without belt pulley |
| Alternator Charge Current | 105 A |
| Recommended additional repairs | V-Belt/V-Ribbed Belt |
| Alternator type | excl. vacuum pump |
| Type | Alternator |
| Fastening Type | Double Pivot Lever |
| Rotation Direction | Clockwise rotation |
| Length | 162 mm |
| Function | Alternator |
| Plug Type ID | 57 |
| Clamp | B+(M8) |
Important compatibility info
| Pressure to | 2 bar |
| Function | Pressure Accumulator, fuel pressure |
| Diameter | 73 mm |
| Material | Sheet Steel |
| Surface | Chrome-(VI)- free passivation, Zinc-coated |
| Type | Pressure Accumulator, fuel pressure |
| Length | 96 mm |
| Connecting Thread 1 | M16x1,5 |
| Connecting Thread 2 | M14x1,5 |
Important compatibility info
| Pressure to | 2 bar |
| Function | Pressure Accumulator, fuel pressure |
| Diameter | 73 mm |
| Material | Sheet Steel |
| Surface | Chrome-(VI)- free passivation, Zinc-coated |
| Type | Pressure Accumulator, fuel pressure |
| Length | 96 mm |
| Connecting Thread 1 | M16x1,5 |
| Connecting Thread 2 | M14x1,5 |
Important compatibility info
| Number of Teeth | 9 |
| Function | Starter |
| Thread Measurement 1 | M10x1.5 |
| Flange Diameter | 76.2 mm |
| Type | Starter |
| Pinion Rest Position | 21 mm |
| Jaw opening angle measurement [Degree] | 9 ° |
| Rated Power | 1.7 kW |
| Replaces | 0001108460 |
| Thread Size | M10x1.5 |
| Length | 234 mm |
| Rotation Direction | Clockwise rotation |
| Voltage | 12 V |
| Position / Degree | rechts ° |
| Number of Thread Bores | 2 |
| Starter Type | Self-supporting |
| Clamp | 30,50 |
Important compatibility info
| Number of Teeth | 9 |
| Function | Starter |
| Thread Measurement 1 | M10x1.5 |
| Flange Diameter | 76.2 mm |
| Type | Starter |
| Pinion Rest Position | 21 mm |
| Jaw opening angle measurement [Degree] | 9 ° |
| Rated Power | 1.7 kW |
| Replaces | 0001108460 |
| Thread Size | M10x1.5 |
| Length | 234 mm |
| Rotation Direction | Clockwise rotation |
| Voltage | 12 V |
| Position / Degree | rechts ° |
| Number of Thread Bores | 2 |
| Starter Type | Self-supporting |
| Clamp | 30,50 |
Important compatibility info
| Voltage | 14 V |
| Alternator Charge Current | 80 A |
| Recommended additional repairs | V-Belt/V-Ribbed Belt |
| Alternator type | excl. vacuum pump |
| Type | Alternator |
| Distance from pulley to alternator | 42.5 mm |
| Fastening Type | Double Pivot Lever |
| Number of grooves | 6 |
| Belt Pulley Diameter | 54.5 mm |
| Rotation Direction | Clockwise rotation |
| Pulleys | with multi-belt pulley |
| Length | 170 mm |
| Function | Alternator |
Important compatibility info
| Voltage | 14 V |
| Alternator Charge Current | 80 A |
| Recommended additional repairs | V-Belt/V-Ribbed Belt |
| Alternator type | excl. vacuum pump |
| Type | Alternator |
| Distance from pulley to alternator | 42.5 mm |
| Fastening Type | Double Pivot Lever |
| Number of grooves | 6 |
| Belt Pulley Diameter | 54.5 mm |
| Rotation Direction | Clockwise rotation |
| Pulleys | with multi-belt pulley |
| Length | 170 mm |
| Function | Alternator |
Important compatibility info
| Function | Particle Sensor |
| Type | Particle Sensor |
Important compatibility info
| Function | Particle Sensor |
| Type | Particle Sensor |
Important compatibility info
| Voltage | 12 V |
| Function | Starter |
| Type | Starter |
| Pinion Rest Position | 23 mm |
| Number of mounting bores | 2 |
| Rated Power | 1.2 kW |
| Rotation Direction | Clockwise rotation |
| Thread Size | M10X1,25 |
| Bore Diameter | 8.6 mm |
| Flange Diameter | 66 mm |
| Number of Thread Bores | 1 |
| Position / Degree | links ° |
| Clamp | 50, 30 |
| Connecting Angle | 33 ° |
| Bore Diameter 2 | 10.5 mm |
| Fastening hole angle measurement [Degree] | 33 ° |
Important compatibility info
| Voltage | 12 V |
| Function | Starter |
| Type | Starter |
| Pinion Rest Position | 23 mm |
| Number of mounting bores | 2 |
| Rated Power | 1.2 kW |
| Rotation Direction | Clockwise rotation |
| Thread Size | M10X1,25 |
| Bore Diameter | 8.6 mm |
| Flange Diameter | 66 mm |
| Number of Thread Bores | 1 |
| Position / Degree | links ° |
| Clamp | 50, 30 |
| Connecting Angle | 33 ° |
| Bore Diameter 2 | 10.5 mm |
| Fastening hole angle measurement [Degree] | 33 ° |
Important compatibility info
| Voltage | 12 V |
| Rated Power | 2.5 kW |
| Function | Starter |
| Fastening hole angle measurement [Degree] | 37 ° |
| Jaw opening angle measurement [Degree] | 60 ° |
| Starter Type | Self-supporting |
| Pinion Rest Position | 1 mm |
| Connecting Angle | 37 ° |
| Clamp | 30,50 |
| Position / Degree | links ° |
| Number of Thread Bores | 3 |
| Flange Diameter | 82 mm |
| Rotation Direction | Clockwise rotation |
| Thread Measurement 2 | M8x1.25 |
| Thread Measurement 1 | M8x1.25 |
| Number of Teeth | 9 |
| Thread Size | M8x1.25 |
| Length | 246 mm |
| Type | Starter |
Important compatibility info
| Voltage | 12 V |
| Rated Power | 2.5 kW |
| Function | Starter |
| Fastening hole angle measurement [Degree] | 37 ° |
| Jaw opening angle measurement [Degree] | 60 ° |
| Starter Type | Self-supporting |
| Pinion Rest Position | 1 mm |
| Connecting Angle | 37 ° |
| Clamp | 30,50 |
| Position / Degree | links ° |
| Number of Thread Bores | 3 |
| Flange Diameter | 82 mm |
| Rotation Direction | Clockwise rotation |
| Thread Measurement 2 | M8x1.25 |
| Thread Measurement 1 | M8x1.25 |
| Number of Teeth | 9 |
| Thread Size | M8x1.25 |
| Length | 246 mm |
| Type | Starter |
Important compatibility info
| Rated Power | 1.7 kW |
| Function | Starter |
| Fastening hole angle measurement [Degree] | 40 ° |
| Starter Type | Floating pinion |
| Bore Diameter 2 | 12.5 mm |
| Pinion Rest Position | 52.5 mm |
| Connecting Angle | 40 ° |
| Clamp | 50, 30 |
| Position / Degree | links ° |
| Flange Diameter | 76.2 mm |
| Number of mounting bores | 2 |
| Rotation Direction | Anticlockwise rotation |
| Bore Diameter | 12.5 mm |
| Number of Teeth | 10 |
| Length | 245 mm |
| Voltage | 12 V |
| Type | Starter |
Important compatibility info
| Rated Power | 1.7 kW |
| Function | Starter |
| Fastening hole angle measurement [Degree] | 40 ° |
| Starter Type | Floating pinion |
| Bore Diameter 2 | 12.5 mm |
| Pinion Rest Position | 52.5 mm |
| Connecting Angle | 40 ° |
| Clamp | 50, 30 |
| Position / Degree | links ° |
| Flange Diameter | 76.2 mm |
| Number of mounting bores | 2 |
| Rotation Direction | Anticlockwise rotation |
| Bore Diameter | 12.5 mm |
| Number of Teeth | 10 |
| Length | 245 mm |
| Voltage | 12 V |
| Type | Starter |
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Height | 86.4 mm |
| Outer diameter | 300 mm |
| Additional Information 2 | with wheel bearing, with ABS sensor ring |
| Brake Disc Thickness | 11 mm |
| Inner diameter | 30 mm |
| Number of Holes | 5 |
| Minimum thickness | 9.5 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 61.98 mm |
| Surface | Oiled |
| Type | Brake Disc Rotor |
| Fulfils ECE norm | ECE-R90 |
| Function | Brake Disc |
| Rotor Style | Solid |
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Height | 86.4 mm |
| Outer diameter | 300 mm |
| Additional Information 2 | with wheel bearing, with ABS sensor ring |
| Brake Disc Thickness | 11 mm |
| Inner diameter | 30 mm |
| Number of Holes | 5 |
| Minimum thickness | 9.5 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 61.98 mm |
| Surface | Oiled |
| Type | Brake Disc Rotor |
| Fulfils ECE norm | ECE-R90 |
| Function | Brake Disc |
| Rotor Style | Solid |
Important compatibility info
| Clamp | B+(M8),D+(M5) |
| Length | 191 mm |
| Voltage | 14 V |
| Pulleys | with multi-belt pulley |
| Alternator Charge Current | 85 A |
| Rotation Direction | Clockwise rotation |
| Belt Pulley Diameter | 53.5 mm |
| Recommended additional repairs | V-Belt/V-Ribbed Belt |
| Alternator type | excl. vacuum pump |
| Number of grooves | 5 |
| Fastening Type | Direct fastening |
| Distance from pulley to alternator | 17 mm |
| Function | Alternator |
| Type | Alternator |
Important compatibility info
| Clamp | B+(M8),D+(M5) |
| Length | 191 mm |
| Voltage | 14 V |
| Pulleys | with multi-belt pulley |
| Alternator Charge Current | 85 A |
| Rotation Direction | Clockwise rotation |
| Belt Pulley Diameter | 53.5 mm |
| Recommended additional repairs | V-Belt/V-Ribbed Belt |
| Alternator type | excl. vacuum pump |
| Number of grooves | 5 |
| Fastening Type | Direct fastening |
| Distance from pulley to alternator | 17 mm |
| Function | Alternator |
| Type | Alternator |
Important compatibility info
| Alternator Charge Current | 90 A |
| Recommended additional repairs | V-Belt/V-Ribbed Belt |
| Alternator type | excl. vacuum pump |
| Function | Alternator |
| Distance from pulley to alternator | 39.6 mm |
| Clamp | B1+(M8),DFM,L |
| Fastening Type | Double Pivot Lever |
| Number of grooves | 6 |
| Belt Pulley Diameter | 56 mm |
| Rotation Direction | Clockwise rotation |
| Plug Type ID | PL61 |
| Pulleys | with multi-belt pulley |
| Length | 187 mm |
| Voltage | 14 V |
| Type | Alternator |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

























