Car Parts & Accessories by Denso
Denso is a leading worldwide supplier of automotive components with over 60 years of experience. Important compatibility info
| Spanner Size | 16 mm |
| Port / Connector type | Crimped SAE |
| Weight | 43 g |
| Diameter | 14 mm |
| Spark Plug | with resistor, 1 - Earthed Electrode, Iridium Middle Electrode |
| Tightening Torque | 22 Nm |
| Type | Spark Plug |
| Function | Spark Plug |
| Extra Description | Iridium Tough |
| Thread Size | M14x1.25 |
| Thread Length | 19 mm |
| Gross Weight | 46 g |
| for OE number | NDVQ22 |
| alternative item | - |
| Electrode Gap | 0.8 mm |
Important compatibility info
| Plug Type | Male |
| Function | Pressure Switch, air conditioning |
| Type | Pressure Switch, air conditioning |
| Weight | 20 g |
| for OE number | 2038300372 |
| Gross Weight | 30 g |
| alternative item | - |
Important compatibility info
| Plug Type | Male |
| Function | Pressure Switch, air conditioning |
| Type | Pressure Switch, air conditioning |
| Weight | 20 g |
| for OE number | 2038300372 |
| Gross Weight | 30 g |
| alternative item | - |
Important compatibility info
| Weight | 125 g |
| Thread Size | M18x1.5 |
| Number of Poles | 4 -pin connector |
| for OE number | 022906262F |
| Cable Length | 500 mm |
| Quality | OE |
| Lambda Sensor | Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor |
| Type | Oxygen Sensor |
| Manufacturer Restriction | DENSO |
| Function | Oxygen Sensor |
| Extra Description | Direct fit switching sensor |
| Gross Weight | 158 g |
Important compatibility info
| Weight | 125 g |
| Thread Size | M18x1.5 |
| Number of Poles | 4 -pin connector |
| for OE number | 022906262F |
| Cable Length | 500 mm |
| Quality | OE |
| Lambda Sensor | Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor |
| Type | Oxygen Sensor |
| Manufacturer Restriction | DENSO |
| Function | Oxygen Sensor |
| Extra Description | Direct fit switching sensor |
| Gross Weight | 158 g |
Important compatibility info
| Quality | OE |
| Lambda Sensor | Heated, Finger-type Sensor, Switching-type Oxygen Sensor |
| Type | Oxygen Sensor |
| Manufacturer Restriction | DENSO |
| Cable Length | 500 mm |
| Thread Size | M18x1.5 |
| Number of Poles | 4 -pin connector |
| Weight | 94 g |
| Function | Oxygen Sensor |
| Extra Description | Direct fit switching sensor |
| Gross Weight | 124 g |
Important compatibility info
| Quality | OE |
| Lambda Sensor | Heated, Finger-type Sensor, Switching-type Oxygen Sensor |
| Type | Oxygen Sensor |
| Manufacturer Restriction | DENSO |
| Cable Length | 500 mm |
| Thread Size | M18x1.5 |
| Number of Poles | 4 -pin connector |
| Weight | 94 g |
| Function | Oxygen Sensor |
| Extra Description | Direct fit switching sensor |
| Gross Weight | 124 g |
Important compatibility info
| Weight | 25.5 g |
| Type | Glow Plug |
| Tightening torque from | 10 Nm |
| Thread Size | M10x1.0 |
| Function | Glow Plug |
| Port / Connector type | Pin |
| Voltage | 4.4 V |
| Cone Pitch | 63 |
| Overall Length | 96.4 mm |
| Version | Instant heating |
| Spanner Size | 10 |
| Tightening torque to | 12 Nm |
| alternative item | - |
Important compatibility info
| Weight | 25.5 g |
| Type | Glow Plug |
| Tightening torque from | 10 Nm |
| Thread Size | M10x1.0 |
| Function | Glow Plug |
| Port / Connector type | Pin |
| Voltage | 4.4 V |
| Cone Pitch | 63 |
| Overall Length | 96.4 mm |
| Version | Instant heating |
| Spanner Size | 10 |
| Tightening torque to | 12 Nm |
| alternative item | - |
Important compatibility info
| Cable Length | 320 mm |
| Quality | OE |
| Lambda Sensor | Heated, Finger-type Sensor, Switching-type Oxygen Sensor |
| Weight | 151 g |
| Thread Size | Flange 44 |
| Number of Poles | 4 -pin connector |
| Extra Description | Direct fit switching sensor |
| Extra Info | Sensor Type: O2 |
| Function | Oxygen Sensor |
| for OE number | 8946529545 |
| Manufacturer Restriction | DENSO |
| Type | Oxygen Sensor |
| Gross Weight | 191 g |
Important compatibility info
| Cable Length | 320 mm |
| Quality | OE |
| Lambda Sensor | Heated, Finger-type Sensor, Switching-type Oxygen Sensor |
| Weight | 151 g |
| Thread Size | Flange 44 |
| Number of Poles | 4 -pin connector |
| Extra Description | Direct fit switching sensor |
| Extra Info | Sensor Type: O2 |
| Function | Oxygen Sensor |
| for OE number | 8946529545 |
| Manufacturer Restriction | DENSO |
| Type | Oxygen Sensor |
| Gross Weight | 191 g |
Important compatibility info
| Function | Oxygen Sensor |
| Additional Information 2 | with rubber grommet |
| Quality | OE |
| Cable Length | 880 mm |
| Weight | 113 g |
| Number of Poles | 4 -pin connector |
| Extra Info | Sensor Type: O2 |
| Thread Size | M18x1.5 |
| Manufacturer Restriction | DENSO |
| Type | Oxygen Sensor |
| for OE number | 8946542070 |
| Extra Description | Direct fit switching sensor |
| Lambda Sensor | Heated, Finger-type Sensor, Thread pre-greased, Switching-type Oxygen Sensor |
| Gross Weight | 146 g |
Important compatibility info
| Function | Oxygen Sensor |
| Additional Information 2 | with rubber grommet |
| Quality | OE |
| Cable Length | 880 mm |
| Weight | 113 g |
| Number of Poles | 4 -pin connector |
| Extra Info | Sensor Type: O2 |
| Thread Size | M18x1.5 |
| Manufacturer Restriction | DENSO |
| Type | Oxygen Sensor |
| for OE number | 8946542070 |
| Extra Description | Direct fit switching sensor |
| Lambda Sensor | Heated, Finger-type Sensor, Thread pre-greased, Switching-type Oxygen Sensor |
| Gross Weight | 146 g |
Important compatibility info
| for OE number | 1088851 |
| Type | Oxygen Sensor |
| Extra Description | Direct fit switching sensor |
| Quality | OE |
| Lambda Sensor | Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor |
| Manufacturer Restriction | DENSO |
| Function | Oxygen Sensor |
| Thread Size | M18x1.5 |
| Weight | 95 g |
| Number of Poles | 4 -pin connector |
| Cable Length | 450 mm |
| Gross Weight | 128 g |
Important compatibility info
| for OE number | 1088851 |
| Type | Oxygen Sensor |
| Extra Description | Direct fit switching sensor |
| Quality | OE |
| Lambda Sensor | Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor |
| Manufacturer Restriction | DENSO |
| Function | Oxygen Sensor |
| Thread Size | M18x1.5 |
| Weight | 95 g |
| Number of Poles | 4 -pin connector |
| Cable Length | 450 mm |
| Gross Weight | 128 g |
Important compatibility info
| Weight | 60 g |
| Thread Size | M14x1.5 |
| Number of Poles | 2 -pin connector |
| Sensor Type | PTC |
| Cable Length | 415 mm |
| Quality | OE |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
| Gross Weight | 90 g |
Important compatibility info
| Weight | 60 g |
| Thread Size | M14x1.5 |
| Number of Poles | 2 -pin connector |
| Sensor Type | PTC |
| Cable Length | 415 mm |
| Quality | OE |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
| Gross Weight | 90 g |
Important compatibility info
| Type | Oxygen Sensor |
| Manufacturer Restriction | DENSO |
| Function | Oxygen Sensor |
| Weight | 92 g |
| for OE number | 36531P0AA01 |
| Cable Length | 340 mm |
| Extra Info | Sensor Type: O2 |
| Extra Description | Direct fit switching sensor |
| Replaces | DOX-1406; DOX-1408; DOX-1410; DOX-1412; DOX-1413 |
| Quality | OE |
| Lambda Sensor | Heated, Finger-type Sensor, Thread pre-greased, Switching-type Oxygen Sensor |
| Thread Size | M18x1.5 |
| Number of Poles | 4 -pin connector |
| Gross Weight | 125 g |
Important compatibility info
| Type | Oxygen Sensor |
| Manufacturer Restriction | DENSO |
| Function | Oxygen Sensor |
| Weight | 92 g |
| for OE number | 36531P0AA01 |
| Cable Length | 340 mm |
| Extra Info | Sensor Type: O2 |
| Extra Description | Direct fit switching sensor |
| Replaces | DOX-1406; DOX-1408; DOX-1410; DOX-1412; DOX-1413 |
| Quality | OE |
| Lambda Sensor | Heated, Finger-type Sensor, Thread pre-greased, Switching-type Oxygen Sensor |
| Thread Size | M18x1.5 |
| Number of Poles | 4 -pin connector |
| Gross Weight | 125 g |
Important compatibility info
| for OE number | 06A906262Q |
| Type | Oxygen Sensor |
| Lambda Sensor | Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor |
| Manufacturer Restriction | DENSO |
| Function | Oxygen Sensor |
| Extra Description | Direct fit switching sensor |
| Weight | 117 g |
| Thread Size | M18x1.5 |
| Number of Poles | 4 -pin connector |
| Cable Length | 1100 mm |
| Quality | OE |
| Gross Weight | 150 g |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023










