Proud to be a UK-based company
Contact usCar Parts & Accessories by Hella
Important compatibility info
| Placement on Vehicle | Front, Right, Left |
| Length | 130 mm |
| Height | 16 mm |
| Width | 32 mm |
| Additional Information 2 | with pipe |
| Voltage | 24 V |
| Bulb Type | LED |
| Light Function | with position light (LED), with reflector |
| Housing Colour | Black |
| Light Design | LED |
| Mounting Type | mounting, Screw Connection |
| Quantity | 1 |
| Cable Length | 300 mm |
| Number of light functions | 2 |
| Lens Colour | Crystal clear |
| Registration Type | ECE approved, ADR/GGVS approved |
| Fastening Type | for horizontal fastening, for vertical fastening |
| Power Consumption | 1 W |
| Protection Type (IP Code) | IP6K9K |
| Number of LEDs | 1 |
| LED Colour | White |
| Type | Position Light |
| Fulfils ECE norm | R7, R3 |
| Function | Position Light |
Additional Information
Technical Information
Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.
£21.30
Important compatibility info
| Placement on Vehicle | Front |
| Length | 130 mm |
| Height | 16 mm |
| Width | 32 mm |
| Additional Information 2 | with pipe |
| Voltage | 24 V |
| Bulb Type | LED |
| Light Function | with position light, with reflector |
| Housing Colour | Black |
| Light Design | LED |
| Mounting Type | mounting, Screw Connection |
| Quantity | 1 |
| Cable Length | 1300 mm |
| Number of light functions | 2 |
| Lens Colour | Crystal clear |
| Registration Type | ECE approved, ADR/GGVS approved |
| Fastening Type | for horizontal fastening, for vertical fastening |
| Power Consumption | 1 W |
| Protection Type (IP Code) | IP6K9K |
| Number of LEDs | 1 |
| LED Colour | White |
| Type | Position Light |
| Fulfils ECE norm | R7, R3 |
| Function | Position Light |
£27.15
Important compatibility info
| Placement on Vehicle | Right, Left |
| Length | 100 mm |
| Height | 42 mm |
| Width | 40 mm |
| Additional Information 2 | without bulbs |
| Voltage | 24 V |
| Bulb Type | C5W |
| Light Function | with position light |
| Housing Colour | Black |
| Light Design | Halogen |
| Mounting Type | Fitting |
| Quantity | 2 |
| Number of light functions | 1 |
| Lens Colour | Crystal clear |
| Registration Type | ECE approved |
| Fastening Type | for horizontal fastening |
| Power Consumption | 5 W |
| Protection Type (IP Code) | IP5K9K |
| Type | Position Light |
| Fulfils ECE norm | R7 |
| Function | Position Light |
Additional Information
Brief Information
*** Original spare part
£7.11
Important compatibility info
£20.43
Important compatibility info
| Voltage | 12 V. 24 V |
| Bulb Type | LED |
| Light Function | with position light (LED) |
| Light Design | LED |
| Mounting Type | Fitting |
| Cable Length | 5000 mm |
| Number of light functions | 1 |
| Lens Colour | Crystal clear |
| Registration Type | ECE approved, ADR/GGVS approved |
| Number of LEDs | 1 |
| Type | Position Light |
| Function | Position Light |
| Placement on Vehicle | Front |
| Length | 79 mm |
| Height | 23 mm |
| Width | 26 mm |
| Housing Colour | black |
| Fastening Type | for horizontal fastening |
| Power Consumption | 0.5 W |
| LED Colour | yellow (amber) |
| Fulfils ECE norm | R7 |
Additional Information
Technical Information
Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.
£24.72
Important compatibility info
| Temperature range from | -40 °C |
| Temperature range to | +60 °C |
| Voltage | 12 V. 24 V |
| Bulb Type | LED |
| Light Function | with position light (LED) |
| Light Design | LED |
| Mounting Type | Fitting |
| Cable Length | 500 mm |
| Number of light functions | 1 |
| Lens Colour | Crystal clear |
| Registration Type | ECE approved, ADR/GGVS approved |
| Number of LEDs | 1 |
| Type | Position Light |
| Function | Position Light |
Additional Information
Technical Information
Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.
£20.02
Important compatibility info
| Voltage | 12 V. 24 V |
| Light Function | with position light (LED) |
| Cable Length | 500 mm |
| Number of light functions | 1 |
| Registration Type | ECE approved, ADR/GGVS approved |
| Number of LEDs | 1 |
| Type | Position Light |
| Function | Position Light |
Additional Information
Technical Information
Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.
£22.40
Important compatibility info
| Voltage | 12 V. 24 V |
| Light Function | with position light (LED) |
| Cable Length | 500 mm |
| Number of light functions | 1 |
| Registration Type | ECE approved, ADR/GGVS approved |
| Number of LEDs | 1 |
| Type | Position Light |
| Function | Position Light |
Additional Information
Technical Information
Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.
£23.98
Important compatibility info
| Placement on Vehicle | Front |
| Length | 100 mm |
| Width | 40 mm |
| Voltage | 24 V |
| Bulb Type | LED |
| Light Function | with position light (LED) |
| Housing Colour | Black |
| Light Design | LED |
| Mounting Type | Fitting, Screw Connection |
| Quantity | 1 |
| Number of light functions | 1 |
| Lens Colour | Crystal clear |
| Registration Type | ECE approved |
| Fastening Type | for horizontal fastening |
| Power Consumption | 0.8 W |
| Protection Type (IP Code) | IP65 |
| Number of LEDs | 2 |
| LED Colour | White |
| Type | Position Light |
| Fulfils ECE norm | R7 |
| Function | Position Light |
Additional Information
Technical Information
Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.
£20.95
Important compatibility info
| Placement on Vehicle | Vehicle Front |
| Length | 98 mm |
| Height | 30 mm |
| Width | 98 mm |
| Voltage | 24 V |
| Bulb Type | LED |
| Light Function | with position light (LED) |
| Housing Colour | Black |
| Light Design | LED |
| Mounting Type | Fitting, Screw Connection |
| Quantity | 60 |
| Cable Length | 160 mm |
| Number of light functions | 1 |
| Lens Colour | Crystal clear |
| Registration Type | ECE approved |
| Plug Type | open cable ends |
| Power Consumption | 1.8 W |
| Number of LEDs | 12 |
| Type | Position Light |
| Fulfils ECE norm | R7 |
| Function | Position Light |
Additional Information
Technical Information
Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.
£75.61
Important compatibility info
| Type | Position Light |
| Fulfils ECE norm | R7 |
| Function | Position Light |
| Plug Type | open cable ends |
| Power Consumption | 1.8 W |
| Registration Type | ECE approved |
| Number of light functions | 1 |
| Lens Colour | Crystal clear |
| Cable Length | 160 mm |
| Quantity | 1 |
| Light Design | LED |
| Mounting Type | Fitting, Screw Connection |
| Housing Colour | Black |
| Voltage | 24 V |
| Bulb Type | LED |
| Width | 98 mm |
| Placement on Vehicle | Vehicle Front |
| Length | 98 mm |
| Height | 30 mm |
| Light Function | with position light (LED) |
| Number of LEDs | 12 |
Additional Information
Technical Information
Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.
£80.19
Important compatibility info
| Placement on Vehicle | Left, Right, Front |
| Length | 55 mm |
| Height | 88 mm |
| Width | 55 mm |
| Additional Information 2 | without bulbs |
| Voltage | 12 V. 24 V |
| Bulb Type | R5W |
| Light Function | with position light |
| Housing Colour | Black |
| Light Design | Halogen |
| Mounting Type | Fitting, Screw Connection |
| Quantity | 20 |
| Number of light functions | 1 |
| Lens Colour | Crystal clear |
| Registration Type | ECE approved |
| Type | Position Light |
| Fulfils ECE norm | R7 |
| Function | Position Light |
£10.53
Important compatibility info
| Placement on Vehicle | Right Front, Left Front, Left, Right |
| Length | 71 mm |
| Height | 63 mm |
| Width | 63 mm |
| Additional Information 2 | without bulbs |
| Voltage | 12 V |
| Bulb Type | R5W |
| Light Function | with position light |
| Housing Colour | Black |
| Light Design | Halogen |
| Mounting Type | mounting, Bolted |
| Quantity | 4 |
| Number of light functions | 1 |
| Lens Colour | Crystal clear |
| Registration Type | ECE approved |
| Fastening Type | for vertical fastening |
| Power Consumption | 5 W |
| Type | Position Light |
| Fulfils ECE norm | R7 |
| Function | Position Light |
Additional Information
- 1x Hella Lens, position light (9EL108435-001)
£19.41
Important compatibility info
| Placement on Vehicle | Left, Right |
| Length | 122 mm |
| Height | 43 mm |
| Voltage | 24 V. 12 V |
| Bulb Type | LED |
| Light Function | with reverse light, with rear fog light |
| Light Design | LED |
| Mounting Type | mounting, Bolted |
| Quantity | 1 |
| Number of light functions | 2 |
| Lens Colour | White/Red |
| Registration Type | ECE approved |
| Plug Type | open cable ends |
| Number of LEDs | 24 |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
| Extra Description | HELLA VALUEFIT |
Additional Information
Brief Information
*** The HELLA VALUEFIT principle: Quality tested by HELLA at a good price.
£34.33
Important compatibility info
| Placement on Vehicle | Left, Right |
| Length | 122 mm |
| Height | 43 mm |
| Voltage | 24 V. 12 V |
| Bulb Type | LED |
| Light Function | with reverse light, with rear fog light |
| Light Design | LED |
| Mounting Type | mounting, Bolted |
| Quantity | 1 |
| Number of light functions | 2 |
| Lens Colour | White/Red |
| Registration Type | ECE approved |
| Plug Type | open cable ends |
| Number of LEDs | 24 |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
| Extra Description | HELLA VALUEFIT |
Additional Information
Brief Information
*** The HELLA VALUEFIT principle: Quality tested by HELLA at a good price.
£34.33
Important compatibility info
| Placement on Vehicle | Rear |
| Length | 30 mm |
| Diameter | 130 mm |
| Voltage | 12 V. 24 V |
| Bulb Type | LED |
| Light Function | with rear fog light (LED) |
| Housing Colour | Black |
| Light Design | LED |
| Mounting Type | mounting |
| Cable Length | 2500 mm |
| Number of light functions | 1 |
| Lens Colour | Crystal clear |
| Fastening Type | for horizontal fastening |
| Plug Type | open cable ends |
| Protection Type (IP Code) | IP6K7, IP6K6 |
| Number of LEDs | 1 |
| Type | Rear Fog Light |
| Fulfils ECE norm | R10, R38 |
| Function | Rear Fog Light |
Additional Information
Technical Information
Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.
£98.74
Important compatibility info
| Placement on Vehicle | Rear |
| Length | 30 mm |
| Diameter | 130 mm |
| Voltage | 12 V. 24 V |
| Bulb Type | LED |
| Light Function | with rear fog light (LED) |
| Housing Colour | Black |
| Light Design | LED |
| Mounting Type | mounting |
| Cable Length | 2500 mm |
| Number of light functions | 1 |
| Lens Colour | Crystal clear |
| Fastening Type | for horizontal fastening |
| Plug Type | open cable ends |
| Protection Type (IP Code) | IP6K7, IP6K6 |
| Number of LEDs | 1 |
| Type | Rear Fog Light |
| Fulfils ECE norm | R10, R38 |
| Function | Rear Fog Light |
Additional Information
Technical Information
Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.
£98.74
Important compatibility info
| Placement on Vehicle | Centre, Lower |
| Additional Information | with bulb, with bulb holder |
| Voltage | 12 V |
| Bulb Type | P21W |
| Light Function | with rear fog light |
| Left-hand / Right-hand Traffic | for left-hand traffic, for right-hand traffic |
| Light Design | Halogen |
| Number of light functions | 1 |
| Registration Type | ECE approved, CCC approved |
| Type | Rear Fog Light |
| Function | Rear Fog Light |
Additional Information
Brief Information
*** Original spare part
- 1x Hella Bulb (8GA002073-121)
£35.41
Important compatibility info
| Placement on Vehicle | Centre, Lower |
| Additional Information | with bulb, with bulb holder |
| Voltage | 12 V |
| Bulb Type | P21W |
| Light Function | with rear fog light |
| Left-hand / Right-hand Traffic | for left-hand traffic, for right-hand traffic |
| Light Design | Halogen |
| Number of light functions | 1 |
| Registration Type | ECE approved, CCC approved |
| Type | Rear Fog Light |
| Function | Rear Fog Light |
Additional Information
Brief Information
*** Original spare part
- 1x Hella Bulb (8GA002073-121)
£35.41
Important compatibility info
| Placement on Vehicle | Right, Left |
| Length | 88 mm |
| Diameter | 55 mm |
| Additional Information 2 | without bulbs |
| Voltage | 24 V. 12 V |
| Bulb Type | P21W |
| Light Function | with rear fog light |
| Housing Colour | Grey |
| Light Design | Halogen |
| Mounting Type | Fitting |
| Number of light functions | 1 |
| Lens Colour | Red |
| Fastening Type | 3-point attachment |
| Plug Type | Blade Terminal |
| Type | Rear Fog Light |
| Fulfils ECE norm | R38 |
| Function | Rear Fog Light |
£13.29
Important compatibility info
| Placement on Vehicle | Right, Left |
| Length | 88 mm |
| Diameter | 55 mm |
| Additional Information 2 | without bulbs |
| Voltage | 24 V. 12 V |
| Bulb Type | P21W |
| Light Function | with rear fog light |
| Housing Colour | Grey |
| Light Design | Halogen |
| Mounting Type | Fitting |
| Number of light functions | 1 |
| Lens Colour | Red |
| Fastening Type | 3-point attachment |
| Plug Type | Blade Terminal |
| Type | Rear Fog Light |
| Fulfils ECE norm | R38 |
| Function | Rear Fog Light |
£13.29
Important compatibility info
| Placement on Vehicle | Left, Right |
| Length | 102 mm |
| Height | 55 mm |
| Width | 57 mm |
| Additional Information 2 | without bulbs |
| Voltage | 12 V |
| Bulb Type | R10W |
| Light Function | with licence plate light |
| Housing Colour | Black |
| Light Design | Halogen |
| Mounting Type | Bolted, Fitting |
| Quantity | 1 |
| Number of light functions | 1 |
| Lens Colour | Crystal clear |
| Registration Type | ADR/GGVS approved |
| Type | Licence Plate Light |
| Fulfils ECE norm | R4 |
| Function | Licence Plate Light |
Additional Information
Brief Information
*** Original spare part
£13.85
Important compatibility info
| Placement on Vehicle | Left, Right |
| Length | 102 mm |
| Height | 55 mm |
| Width | 57 mm |
| Additional Information 2 | without bulbs |
| Voltage | 12 V |
| Bulb Type | R10W |
| Light Function | with licence plate light |
| Housing Colour | Black |
| Light Design | Halogen |
| Mounting Type | Bolted, Fitting |
| Quantity | 1 |
| Number of light functions | 1 |
| Lens Colour | Crystal clear |
| Registration Type | ADR/GGVS approved |
| Type | Licence Plate Light |
| Fulfils ECE norm | R4 |
| Function | Licence Plate Light |
Additional Information
Brief Information
*** Original spare part
£13.85
Important compatibility info
| Placement on Vehicle | Left, Right |
| Length | 82 mm |
| Height | 26 mm |
| Width | 31 mm |
| Additional Information 2 | without bulbs |
| Voltage | 12 V |
| Bulb Type | C5W |
| Light Function | with licence plate light |
| Housing Colour | Black |
| Light Design | Halogen |
| Mounting Type | mounting, Bolted |
| Quantity | 1 |
| Number of light functions | 1 |
| Lens Colour | Crystal clear |
| Type | Licence Plate Light |
| Fulfils ECE norm | R4 |
| Function | Licence Plate Light |
£8.73
Important compatibility info
| Placement on Vehicle | Left, Right |
| Length | 82 mm |
| Height | 26 mm |
| Width | 31 mm |
| Additional Information 2 | without bulbs |
| Voltage | 12 V |
| Bulb Type | C5W |
| Light Function | with licence plate light |
| Housing Colour | Black |
| Light Design | Halogen |
| Mounting Type | mounting, Bolted |
| Quantity | 1 |
| Number of light functions | 1 |
| Lens Colour | Crystal clear |
| Type | Licence Plate Light |
| Fulfils ECE norm | R4 |
| Function | Licence Plate Light |
£8.73
Important compatibility info
| Placement on Vehicle | outer, Rear |
| Length | 85 mm |
| Height | 57 mm |
| Width | 75 mm |
| Voltage | 12 V. 24 V |
| Bulb Type | LED |
| Light Function | with licence plate light (LED) |
| Housing Colour | Black |
| Light Design | LED |
| Mounting Type | mounting, Screw Connection |
| Quantity | 8 |
| Cable Length | 2500 mm |
| Number of light functions | 1 |
| Lens Colour | Crystal clear |
| Registration Type | ADR/GGVS approved |
| Protection Type (IP Code) | IP6K6, IP6K7 |
| Number of LEDs | 2 |
| Type | Licence Plate Light |
| Fulfils ECE norm | R10, R4 |
| Function | Licence Plate Light |
Additional Information
Technical Information
Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.
£194.00
Important compatibility info
| Placement on Vehicle | outer, Rear |
| Length | 85 mm |
| Height | 57 mm |
| Width | 75 mm |
| Voltage | 12 V. 24 V |
| Bulb Type | LED |
| Light Function | with licence plate light (LED) |
| Housing Colour | Black |
| Light Design | LED |
| Mounting Type | mounting, Screw Connection |
| Quantity | 8 |
| Cable Length | 2500 mm |
| Number of light functions | 1 |
| Lens Colour | Crystal clear |
| Registration Type | ADR/GGVS approved |
| Protection Type (IP Code) | IP6K6, IP6K7 |
| Number of LEDs | 2 |
| Type | Licence Plate Light |
| Fulfils ECE norm | R10, R4 |
| Function | Licence Plate Light |
Additional Information
Technical Information
Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.
£194.00
Important compatibility info
| Placement on Vehicle | outer, Rear |
| Length | 85 mm |
| Height | 57 mm |
| Width | 75 mm |
| Voltage | 12 V. 24 V |
| Bulb Type | LED |
| Light Function | with licence plate light (LED) |
| Housing Colour | Black |
| Light Design | LED |
| Mounting Type | mounting, Screw Connection |
| Quantity | 1 |
| Cable Length | 2500 mm |
| Number of light functions | 1 |
| Lens Colour | Crystal clear |
| Registration Type | ADR/GGVS approved |
| Protection Type (IP Code) | IP6K6, IP6K7 |
| Number of LEDs | 2 |
| Type | Licence Plate Light |
| Fulfils ECE norm | R10, R4 |
| Function | Licence Plate Light |
Additional Information
Technical Information
Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.
£34.39
Important compatibility info
| Placement on Vehicle | outer, Rear |
| Length | 85 mm |
| Height | 57 mm |
| Width | 75 mm |
| Voltage | 12 V. 24 V |
| Bulb Type | LED |
| Light Function | with licence plate light (LED) |
| Housing Colour | Black |
| Light Design | LED |
| Mounting Type | mounting, Screw Connection |
| Quantity | 1 |
| Cable Length | 2500 mm |
| Number of light functions | 1 |
| Lens Colour | Crystal clear |
| Registration Type | ADR/GGVS approved |
| Protection Type (IP Code) | IP6K6, IP6K7 |
| Number of LEDs | 2 |
| Type | Licence Plate Light |
| Fulfils ECE norm | R10, R4 |
| Function | Licence Plate Light |
Additional Information
Technical Information
Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.
£34.39
Important compatibility info
| Placement on Vehicle | Lateral Mounting |
| Length | 93 mm |
| Height | 63 mm |
| Width | 66 mm |
| Additional Information 2 | with pipe, Electromagnetic Compatibility (EMC) |
| Voltage | 12 V. 24 V |
| Plug Type ID | EasyConn |
| Bulb Type | LED |
| Light Function | with licence plate light (LED) |
| Housing Colour | White |
| Light Design | LED |
| Mounting Type | Bolted, mounting |
| Quantity | 36 |
| Cable Length | 1300 mm |
| Number of light functions | 1 |
| Lens Colour | Crystal clear |
| Registration Type | ADR/GGVS approved |
| Protection Type (IP Code) | IP5K9K |
| Number of LEDs | 2 |
| Type | Licence Plate Light |
| Fulfils ECE norm | R10, R4 |
| Function | Licence Plate Light |
Additional Information
Technical Information
Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.
£20.45
Important compatibility info
| Placement on Vehicle | Lateral Mounting |
| Length | 93 mm |
| Height | 63 mm |
| Width | 66 mm |
| Additional Information 2 | with pipe, Electromagnetic Compatibility (EMC) |
| Voltage | 12 V. 24 V |
| Plug Type ID | EasyConn |
| Bulb Type | LED |
| Light Function | with licence plate light (LED) |
| Housing Colour | White |
| Light Design | LED |
| Mounting Type | Bolted, mounting |
| Quantity | 36 |
| Cable Length | 1300 mm |
| Number of light functions | 1 |
| Lens Colour | Crystal clear |
| Registration Type | ADR/GGVS approved |
| Protection Type (IP Code) | IP5K9K |
| Number of LEDs | 2 |
| Type | Licence Plate Light |
| Fulfils ECE norm | R10, R4 |
| Function | Licence Plate Light |
Additional Information
Technical Information
Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.
£20.45
Important compatibility info
| Length | 93 mm |
| Height | 63 mm |
| Width | 66 mm |
| Voltage | 12 V |
| Bulb Type | LED |
| Light Function | with licence plate light (LED) |
| Housing Colour | Black |
| Light Design | LED |
| Mounting Type | Bolted |
| Quantity | 1 |
| Number of light functions | 1 |
| Lens Colour | Crystal clear |
| Registration Type | CCC approved, SAE approved, ADR/GGVS approved |
| Plug Type | Blade Terminal |
| Protection Type (IP Code) | IP6K9K |
| Number of LEDs | 4 |
| Type | Licence Plate Light |
| Fulfils ECE norm | R4, R10 |
| Function | Licence Plate Light |
Additional Information
Technical Information
Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.
Brief Information
*** Original spare part
- 1x Hella Licence Plate Light (2KA010278-181)
£23.43
Important compatibility info
| Length | 93 mm |
| Height | 63 mm |
| Width | 66 mm |
| Voltage | 12 V |
| Bulb Type | LED |
| Light Function | with licence plate light (LED) |
| Housing Colour | Black |
| Light Design | LED |
| Mounting Type | Bolted |
| Quantity | 1 |
| Number of light functions | 1 |
| Lens Colour | Crystal clear |
| Registration Type | CCC approved, SAE approved, ADR/GGVS approved |
| Plug Type | Blade Terminal |
| Protection Type (IP Code) | IP6K9K |
| Number of LEDs | 4 |
| Type | Licence Plate Light |
| Fulfils ECE norm | R4, R10 |
| Function | Licence Plate Light |
Additional Information
Technical Information
Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.
Brief Information
*** Original spare part
- 1x Hella Licence Plate Light (2KA010278-181)
£23.43
Important compatibility info
| Placement on Vehicle | Lateral Mounting |
| Length | 93 mm |
| Height | 63 mm |
| Width | 66 mm |
| Additional Information 2 | Electromagnetic Compatibility (EMC) |
| Voltage | 24 V |
| Bulb Type | LED |
| Light Function | with licence plate light (LED) |
| Housing Colour | Black |
| Light Design | LED |
| Mounting Type | Bolted, mounting |
| Quantity | 1 |
| Cable Length | 2000 mm |
| Number of light functions | 1 |
| Lens Colour | Crystal clear |
| Registration Type | ADR/GGVS approved |
| Plug Type | Blade Terminal Sleeve |
| Protection Type (IP Code) | IP6K9K |
| Number of LEDs | 4 |
| Type | Licence Plate Light |
| Fulfils ECE norm | R4, R10 |
| Function | Licence Plate Light |
Additional Information
Technical Information
Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.
- 1x Hella Licence Plate Light (2KA010278-181)
£48.47
Important compatibility info
| Placement on Vehicle | Lateral Mounting |
| Length | 93 mm |
| Height | 63 mm |
| Width | 66 mm |
| Additional Information 2 | Electromagnetic Compatibility (EMC) |
| Voltage | 24 V |
| Bulb Type | LED |
| Light Function | with licence plate light (LED) |
| Housing Colour | Black |
| Light Design | LED |
| Mounting Type | Bolted, mounting |
| Quantity | 1 |
| Cable Length | 2000 mm |
| Number of light functions | 1 |
| Lens Colour | Crystal clear |
| Registration Type | ADR/GGVS approved |
| Plug Type | Blade Terminal Sleeve |
| Protection Type (IP Code) | IP6K9K |
| Number of LEDs | 4 |
| Type | Licence Plate Light |
| Fulfils ECE norm | R4, R10 |
| Function | Licence Plate Light |
Additional Information
Technical Information
Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.
- 1x Hella Licence Plate Light (2KA010278-181)
£48.47
Important compatibility info
| Placement on Vehicle | outer, Lateral Mounting |
| Length | 93 mm |
| Height | 63 mm |
| Width | 66 mm |
| Additional Information 2 | Electromagnetic Compatibility (EMC) |
| Voltage | 24 V |
| Bulb Type | LED |
| Light Function | with licence plate light (LED) |
| Housing Colour | Black |
| Light Design | LED |
| Mounting Type | Bolted, mounting |
| Quantity | 1 |
| Number of light functions | 1 |
| Lens Colour | Crystal clear |
| Registration Type | ADR/GGVS approved |
| Plug Type | Blade Terminal |
| Protection Type (IP Code) | IP6K9K |
| Number of LEDs | 4 |
| Type | Licence Plate Light |
| Fulfils ECE norm | R4 |
| Function | Licence Plate Light |
Additional Information
Technical Information
Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.
- 1x Hella Licence Plate Light (2KA010278-181)
£24.80
Important compatibility info
| Placement on Vehicle | outer, Lateral Mounting |
| Length | 93 mm |
| Height | 63 mm |
| Width | 66 mm |
| Additional Information 2 | Electromagnetic Compatibility (EMC) |
| Voltage | 24 V |
| Bulb Type | LED |
| Light Function | with licence plate light (LED) |
| Housing Colour | Black |
| Light Design | LED |
| Mounting Type | Bolted, mounting |
| Quantity | 1 |
| Number of light functions | 1 |
| Lens Colour | Crystal clear |
| Registration Type | ADR/GGVS approved |
| Plug Type | Blade Terminal |
| Protection Type (IP Code) | IP6K9K |
| Number of LEDs | 4 |
| Type | Licence Plate Light |
| Fulfils ECE norm | R4 |
| Function | Licence Plate Light |
Additional Information
Technical Information
Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.
- 1x Hella Licence Plate Light (2KA010278-181)
£24.80
Important compatibility info
| Placement on Vehicle | outer, Upper |
| Length | 24 mm |
| Height | 33 mm |
| Width | 83 mm |
| Additional Information 2 | without pipe, with frame |
| Voltage | 24 V |
| Bulb Type | LED |
| Light Function | with licence plate light (LED) |
| Housing Colour | Black |
| Light Design | LED |
| Mounting Type | Fitting, Screw Connection |
| Quantity | 1 |
| Number of light functions | 1 |
| Lens Colour | Crystal clear |
| Registration Type | ADR/GGVS approved |
| Plug Type | Blade Terminal |
| Protection Type (IP Code) | IP6K9K |
| Number of LEDs | 4 |
| Type | Licence Plate Light |
| Fulfils ECE norm | R4 |
| Function | Licence Plate Light |
Additional Information
Technical Information
Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.
£21.75
Important compatibility info
| Placement on Vehicle | outer, Upper |
| Length | 24 mm |
| Height | 33 mm |
| Width | 83 mm |
| Additional Information 2 | without pipe, with frame |
| Voltage | 24 V |
| Bulb Type | LED |
| Light Function | with licence plate light (LED) |
| Housing Colour | Black |
| Light Design | LED |
| Mounting Type | Fitting, Screw Connection |
| Quantity | 1 |
| Number of light functions | 1 |
| Lens Colour | Crystal clear |
| Registration Type | ADR/GGVS approved |
| Plug Type | Blade Terminal |
| Protection Type (IP Code) | IP6K9K |
| Number of LEDs | 4 |
| Type | Licence Plate Light |
| Fulfils ECE norm | R4 |
| Function | Licence Plate Light |
Additional Information
Technical Information
Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.
£21.75
Important compatibility info
| Placement on Vehicle | outer, Left, Right |
| Length | 105 mm |
| Height | 56 mm |
| Width | 105 mm |
| Additional Information 2 | without bulbs |
| Voltage | 24 V |
| Bulb Type | C5W |
| Light Function | with licence plate light |
| Housing Colour | Black |
| Light Design | Halogen |
| Mounting Type | mounting, Screw Connection |
| Quantity | 2 |
| Number of light functions | 1 |
| Lens Colour | Crystal clear |
| Registration Type | ECE approved, ADR/GGVS approved |
| Type | Licence Plate Light |
| Fulfils ECE norm | R4 |
| Function | Licence Plate Light |
£21.09
Important compatibility info
| Placement on Vehicle | outer, Left, Right |
| Length | 105 mm |
| Height | 56 mm |
| Width | 105 mm |
| Additional Information 2 | without bulbs |
| Voltage | 24 V |
| Bulb Type | C5W |
| Light Function | with licence plate light |
| Housing Colour | Black |
| Light Design | Halogen |
| Mounting Type | mounting, Screw Connection |
| Quantity | 2 |
| Number of light functions | 1 |
| Lens Colour | Crystal clear |
| Registration Type | ECE approved, ADR/GGVS approved |
| Type | Licence Plate Light |
| Fulfils ECE norm | R4 |
| Function | Licence Plate Light |
£21.09
Important compatibility info
| Colour | black |
| Placement on Vehicle | Left, Right |
| Length | 83 mm |
| Height | 33 mm |
| Width | 39 mm |
| Additional Information | with bulb, with bulb holder |
| Voltage | 24 V |
| Bulb Type | C5W |
| Light Function | with licence plate light |
| Housing Colour | Black |
| Light Design | Halogen |
| Mounting Type | Bolted, Fitting |
| Quantity | 40 |
| Number of light functions | 1 |
| Lens Colour | Crystal clear |
| Registration Type | SAE approved |
| Protection Type (IP Code) | IP5K4K |
| Type | Licence Plate Light |
| Fulfils ECE norm | R4 |
| Function | Licence Plate Light |
Additional Information
- 1x Hella Bulb (8GM002092-241)
£9.49
Important compatibility info
| Colour | black |
| Placement on Vehicle | Left, Right |
| Length | 83 mm |
| Height | 33 mm |
| Width | 39 mm |
| Additional Information | with bulb, with bulb holder |
| Voltage | 24 V |
| Bulb Type | C5W |
| Light Function | with licence plate light |
| Housing Colour | Black |
| Light Design | Halogen |
| Mounting Type | Bolted, Fitting |
| Quantity | 40 |
| Number of light functions | 1 |
| Lens Colour | Crystal clear |
| Registration Type | SAE approved |
| Protection Type (IP Code) | IP5K4K |
| Type | Licence Plate Light |
| Fulfils ECE norm | R4 |
| Function | Licence Plate Light |
Additional Information
- 1x Hella Bulb (8GM002092-241)
£9.49
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 102 mm |
| Height | 57 mm |
| Width | 55 mm |
| Additional Information | without bulb |
| Additional Information 2 | without bulbs |
| Voltage | 12 V. 24 V |
| Bulb Type | R10W |
| Light Function | with licence plate light |
| Housing Colour | Black |
| Light Design | Halogen |
| Mounting Type | Screw Connection |
| Quantity | 56 |
| Number of light functions | 1 |
| Lens Colour | Crystal clear |
| Registration Type | ECE approved, SAE approved, ADR/GGVS approved, CCC approved |
| Plug Type | Blade Terminal |
| Type | Licence Plate Light |
| Fulfils ECE norm | R4 |
| Function | Licence Plate Light |
| Material | Plastic |
| Housing Type | Synthetic Material Housing |
Additional Information
Brief Information
*** Original spare part
- 1x Hella Housing, licence plate light (9BG121587-031)
£10.46
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 102 mm |
| Height | 57 mm |
| Width | 55 mm |
| Additional Information | without bulb |
| Additional Information 2 | without bulbs |
| Voltage | 12 V. 24 V |
| Bulb Type | R10W |
| Light Function | with licence plate light |
| Housing Colour | Black |
| Light Design | Halogen |
| Mounting Type | Screw Connection |
| Quantity | 56 |
| Number of light functions | 1 |
| Lens Colour | Crystal clear |
| Registration Type | ECE approved, SAE approved, ADR/GGVS approved, CCC approved |
| Plug Type | Blade Terminal |
| Type | Licence Plate Light |
| Fulfils ECE norm | R4 |
| Function | Licence Plate Light |
| Material | Plastic |
| Housing Type | Synthetic Material Housing |
Additional Information
Brief Information
*** Original spare part
- 1x Hella Housing, licence plate light (9BG121587-031)
£10.46
Important compatibility info
| Placement on Vehicle | Rear, Right, Left |
| Length | 102 mm |
| Height | 57 mm |
| Width | 55 mm |
| Additional Information 2 | without bulbs |
| Voltage | 6 V. 24 V. 12 V |
| Bulb Type | R10W |
| Light Function | with licence plate light |
| Housing Colour | Grey |
| Light Design | Halogen |
| Mounting Type | mounting, Screw Connection |
| Quantity | 1 |
| Number of light functions | 1 |
| Lens Colour | Crystal clear |
| Registration Type | ADR/GGVS approved, ECE approved, SAE approved |
| Plug Type | Blade Terminal |
| Type | Licence Plate Light |
| Fulfils ECE norm | R4 |
| Function | Licence Plate Light |
Additional Information
Technical Information
For surface mounting above 340 x 240 mm (1 lamp) and 520 x 120 mm (1 ans 2 lamps) numberplates or mounting to left and right of 340 x 240 mm and 520 x 120 mm numberplates. Clear lens. Grey plastic body. Black base plate of plastic material. Two 4.5 mm dia. holes for fixing screws. Numberplate lamp with 72 mm distance between screws
£12.37
Important compatibility info
| Placement on Vehicle | Rear, Right, Left |
| Length | 102 mm |
| Height | 57 mm |
| Width | 55 mm |
| Additional Information 2 | without bulbs |
| Voltage | 6 V. 24 V. 12 V |
| Bulb Type | R10W |
| Light Function | with licence plate light |
| Housing Colour | Grey |
| Light Design | Halogen |
| Mounting Type | mounting, Screw Connection |
| Quantity | 1 |
| Number of light functions | 1 |
| Lens Colour | Crystal clear |
| Registration Type | ADR/GGVS approved, ECE approved, SAE approved |
| Plug Type | Blade Terminal |
| Type | Licence Plate Light |
| Fulfils ECE norm | R4 |
| Function | Licence Plate Light |
Additional Information
Technical Information
For surface mounting above 340 x 240 mm (1 lamp) and 520 x 120 mm (1 ans 2 lamps) numberplates or mounting to left and right of 340 x 240 mm and 520 x 120 mm numberplates. Clear lens. Grey plastic body. Black base plate of plastic material. Two 4.5 mm dia. holes for fixing screws. Numberplate lamp with 72 mm distance between screws
£12.37
Important compatibility info
| Bulb Type | C5W |
| Placement on Vehicle | Left, Right |
| Additional Information | with bulb holder, without bulb |
| Light Function | with licence plate light |
| Light Design | Halogen |
| Mounting Type | Bolted |
| Number of light functions | 1 |
| Registration Type | ECE approved |
| Type | Licence Plate Light |
| Function | Licence Plate Light |
Additional Information
Technical Information
For flush mounting above or below 520 x 120 mm (2 or 3 lamps) and 340 x 240 mm (2 lamps) numberplates. Clear lens. Two M4 fixing screws. Depth required for flush fitting: 25 mm. Numberplate lamp with silver-coloured finish, without fixing screw
Brief Information
*** Original spare part
£13.68
Important compatibility info
| Bulb Type | C5W |
| Placement on Vehicle | Left, Right |
| Additional Information | with bulb holder, without bulb |
| Light Function | with licence plate light |
| Light Design | Halogen |
| Mounting Type | Bolted |
| Number of light functions | 1 |
| Registration Type | ECE approved |
| Type | Licence Plate Light |
| Function | Licence Plate Light |
Additional Information
Technical Information
For flush mounting above or below 520 x 120 mm (2 or 3 lamps) and 340 x 240 mm (2 lamps) numberplates. Clear lens. Two M4 fixing screws. Depth required for flush fitting: 25 mm. Numberplate lamp with silver-coloured finish, without fixing screw
Brief Information
*** Original spare part
£13.68
Important compatibility info
| Length | 265 mm |
| Height | 33 mm |
| Function | Interior Light |
| Type | Interior Light |
| Number of LEDs | 10 |
| Power Consumption | 2.0 W |
| Lens Colour | Crystal clear |
| Depth | 30 mm |
| Current Strength | 0.09 A |
| Cable Length | 2500 mm |
| Quantity | 1 |
| Mounting Type | Fitting, Screw Connection |
| Housing Colour | Black |
| Light Function | with cabin light |
| Voltage | 24 V |
| Number of light functions | 1 |
| Light Design | LED |
| Bulb Type | LED |
| Placement on Vehicle | Interior |
£67.47
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023