Proud to be a UK-based company
Contact usGeneric Lighting by Hella
Hella is a global supplier of automotive components supplying both OE and the aftermarket with quality products. Lighting Sub-Categories
Important compatibility info
| Height | 263 mm |
| Width | 168 mm |
| Additional Information 2 | without bulbs, with integrated grille |
| Voltage | 12 V. 24 V |
| Bulb Type | H3 |
| Housing Colour | Black |
| Light Design | Halogen |
| Mounting Type | mounting, Screw Connection |
| Depth | 126 mm |
| Housing Type | Synthetic Material Housing |
| Fastening Type | Four-point attachment |
| Light Distribution | Short-Range Illumination |
| Plug Type | open cable ends |
| Power Consumption | 35 W. 70 W |
| Protection Type (IP Code) | IP5K4K |
| Diffusing Lens Type | Patterned diffusing lens |
| Type | Worklight |
| Diffusing Lens Material | Glass |
| Function | Worklight |
| Extra Description | Matador |
Additional Information
- 1x Hella Holder (9XD130261-001)
- 1x Hella Reflector, worklight (9DS121707-001)
£45.01
Important compatibility info
| Light Function | with position light |
| Number of light functions | 1 |
| Type | Position Light |
| Function | Position Light |
£43.40
Important compatibility info
| Placement on Vehicle | Rear |
| Length | 30 mm |
| Height | 98 mm |
| Width | 98 mm |
| Voltage | 12 V |
| Bulb Type | LED |
| Light Function | with taillight (LED) |
| Housing Colour | Black |
| Light Design | LED |
| Mounting Type | Fitting |
| Quantity | 60 |
| Number of light functions | 1 |
| Lens Colour | Crystal clear |
| Fastening Type | 3-point attachment |
| Plug Type | open cable ends |
| Power Consumption | 1.8 W |
| Number of LEDs | 12 |
| LED Colour | Red |
| Type | Tail Light |
| Fulfils ECE norm | R7 |
| Function | Tail Light |
Additional Information
Technical Information
Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.
£40.55
Important compatibility info
| Placement on Vehicle | Left, Right |
| Length | 30 mm |
| Height | 98 mm |
| Width | 98 mm |
| Voltage | 24 V |
| Bulb Type | LED |
| Light Function | with taillight (LED) |
| Housing Colour | Black |
| Light Design | LED |
| Mounting Type | Fitting |
| Quantity | 60 |
| Number of light functions | 1 |
| Lens Colour | Crystal clear |
| Registration Type | CCC approved |
| Fastening Type | 3-point attachment |
| Plug Type | open cable ends |
| Power Consumption | 1.8 W |
| Number of LEDs | 12 |
| LED Colour | Red |
| Type | Tail Light |
| Fulfils ECE norm | R7 |
| Function | Tail Light |
Additional Information
Technical Information
Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.
£37.61
Important compatibility info
| Registration Type | ADR/GGVS approved |
| Height | 152 mm |
| Width | 112 mm |
| Additional Information 2 | without cable, without bulbs |
| Voltage | 12 V. 24 V |
| Bulb Type | H3 |
| Housing Colour | Black |
| Light Design | Halogen |
| Mounting Type | mounting, Screw Connection |
| Depth | 97 mm |
| Housing Type | Synthetic Material Housing |
| Fastening Type | Four-point attachment |
| Light Distribution | Ground Illumination |
| Plug Type | AMP |
| Protection Type (IP Code) | IP6K4K, IP6K9K |
| Diffusing Lens Type | Patterned diffusing lens |
| Type | Worklight |
| Diffusing Lens Material | Glass |
| Function | Worklight |
| Replaces | 1GA007506-012 |
Additional Information
- 1x Hella Insert, worklight (1GA998525-001)
- 1x Hella Cap, work light (9GH993984-001)
- 1x Hella Holder (9XD990298-001)
£35.16
Important compatibility info
| Placement on Vehicle | Lateral Mounting |
| Length | 111 mm |
| Height | 43 mm |
| Width | 51 mm |
| Additional Information | with holder |
| Voltage | 24 V |
| Number of Poles | 2 -pin connector |
| Bulb Type | LED |
| Light Function | with reflector, with side marker light (LED) |
| Housing Colour | Black |
| Light Design | LED |
| Mounting Type | mounting, Screw Connection |
| Quantity | 1 |
| Cable Length | 4000 mm |
| Number of light functions | 2 |
| Housing Type | Housing with Plastic Lid |
| Lens Colour | yellow (amber) |
| Registration Type | ADR/GGVS approved |
| Fastening Type | for horizontal fastening |
| Plug Type | AMP |
| Power Consumption | 1.2 W |
| Protection Type (IP Code) | IP6K9K |
| Number of LEDs | 2 |
| LED Colour | yellow (amber) |
| Type | Side Marker Light |
| Fulfils ECE norm | R10, R3, R91 |
| Function | Side Marker Light |
£34.66
Important compatibility info
| Type | Lens, rotating beacon |
| Registration Type | ECE approved |
| Function | Lens, rotating beacon |
| Light colour | yellow (amber) |
| Lens Colour | yellow (amber) |
£33.95
Important compatibility info
| Placement on Vehicle | Left, Right |
| Light Function | with indicator, with stop light, with rear fog light, with reverse light, with reflector, with taillight |
| Number of light functions | 6 |
| Registration Type | ECE approved |
| Type | Lens, tail light assembly |
| Function | Lens, tail light assembly |
£31.32
Important compatibility info
| Lens Colour | yellow (amber) |
| Registration Type | ECE approved |
| Type | Lens, rotating beacon |
| Function | Lens, rotating beacon |
| Light colour | yellow (amber) |
£31.29
Important compatibility info
| Placement on Vehicle | Lateral Mounting |
| Length | 111 mm |
| Height | 21 mm |
| Width | 51 mm |
| Additional Information | without holder |
| Voltage | 24 V |
| Number of Poles | 2 -pin connector |
| Bulb Type | LED |
| Light Function | with side marker light (LED), with reflector |
| Housing Colour | Black |
| Light Design | LED |
| Mounting Type | Screw Connection, mounting |
| Quantity | 20 |
| Cable Length | 1530 mm |
| Number of light functions | 2 |
| Housing Type | Housing with Plastic Lid |
| Lens Colour | yellow (amber) |
| Registration Type | ADR/GGVS approved |
| Fastening Type | for horizontal fastening |
| Plug Type | AMP |
| Power Consumption | 1.2 W |
| Protection Type (IP Code) | IP6K9K |
| Number of LEDs | 2 |
| LED Colour | yellow (amber) |
| Type | Side Marker Light |
| Fulfils ECE norm | R10, R91, R3 |
| Function | Side Marker Light |
£29.32
