Workshop Tools by Laser

General Information

Cambelt Tool Kit - for VAG Petrol FSI 1.4, 1.6

• Made in Sheffield
• This kit is suitable for use with the following replacement Cam-belt kits INA 530008910, Contitech CT957K1, Gates K025565XS
• Use one belt to transfer the drive across the camshafts depending on the engine specification the cam setting pins may be used with or without the crossbar provided
• A small but essential kit for setting the camshafts and tensioner on the popular 1.4 and 1.6 FSi petrol engines found across the VAG ranges from 1999 to 2008 these engines

General Information

Protective Faceshield Bag. Protective Faceshield Bag

• To be used with the Connect Assorted Deutsch DT Connector Kit - Part No.37415. Replacement blisters available
• Crimps closed barrel contacts (Deutsch) D-Sub contacts with RS-232 interface connectors
• Ratchet mechanism releases only after proper crimp force has been applied ensuring reliable connections every time
• Length: 165mm. For cable diameter: 14-18 AWG (1mm² - 2mm²)
• 4 way indent crimping tool for Deutsch DT connectors

• For Small to Medium engines
• Adjustable collet release adaptors
• Throat clearance 150mm
• Collet release adaptors 25-40mm
• Auto lock with 70-135mm jaw opening

General Information

Brake Caliper Wrench E24 - HGV MAN TGA, TGS, TGX.

General Information

Aluminium Repair System Aluminium Repair System.

• Can be used with standard heat source
• Complete with tinning brush & 5 aluminium rods
• This product will repair any damage to aluminium parts quickly and effectively without using flux or chemicals
• Using a standard heat source these aluminium brazing rods can repair damage to most aluminium parts without using flux or chemicals Brazes all Aluminium Alloys, including Zinc, Magnesium, Pot Metal and Cast Aluminium

General Information

Camshaft Locking Tool - Seat. Camshaft Locking Tool - Seat

• An additional knob/handle is incorporated in the tool to assist with precision alignment
• The Camshaft setting bracket can be offered to the camshaft slot by sliding it along the dowel screws
• This time saving product from Laser means essential timing adjustment can take place with the Vacuum Pump and Cam cover still in place
• This revised Camshaft Setting Bracket for VWs now gives even better alignment with 2 ground shoulder screws included in the set

General Information

Timing Tool Kit - Ford 1.25, 1.4, 1.6 16V, 1.5, 1.6 TI-VCT

• Made in Sheffield
• Also relevant to the Mazda and Volvo ranges
• Suitable for use with the following replacement belt kits INA530014010, Contitech CT881K2, Gates K025433XS
• This kit includes the alignment tool for VVT system found on many of these engines which extends the kits coverage from 1996 to 2010
• The essential camshaft and crankshaft alignment tools for the popular 1.25, 1.4, 1.6 Ford, petrol, engines

General Information

Torch with Heat Shrink Tubing Set 162pc Torch with Heat Shrink Tubing Set 162pc.

• Time saver
• Quick and accurate
• A quick and accurate way of setting and adjusting fork oil levels
• Aluminium level adjuster
• Syringed hollow filler
• Motorcycle fork oil level adjuster

General Information

Flywheel Locking Tool. Flywheel Locking Tool

• Flywheel Locking tool OEM 21-168/303-393
• Flywheel Locking tool adaptor (01) 303-393-02
• Flywheel Locking tool adaptor (01) 303-393-01
• Flywheel locking tool for Ford diesel and petrol engines

General Information

Punch Set - Long Pin 6pc

• Soft grip handles with protective ring
• Pins manufactured from 8660 steel
• Sizes 3mm, 4mm, (8.5mm dia), 5mm, 6mm,(10mm dia), 8mm, 10mm (13.2mm dia) x 205mm long
• Complete with its own foldable hanger that unfolds to become a display/workshop stand

General Information

Dual Connection Adaptor - for Bosch

• To be used with Laser slide Hammer (Part No 4811) or with any slide hammer with a 5/8 UNF thread
• Allows the connection to both the internal M17 internal thread and the M27 external thread
• Allows the stress of the injector pulling to be spread over as much of the injector body as possible

General Information

Timing Tool Set 2.0lt TDi PD - VAG Timing Tool Set 2.0lt TDi PD - VAG.

• Tools also available separately
• Full OEM reference and guidance notes included with each set
• Specifically designed for Belt driven diesel engines
• Timing tool kit for VAG 2.0 litre TDI, PD & DOHC engines fitted to Audi A4, Audi A6, Skoda Octavia II, Volkswagen Golf, Jetta and Touran models

• Part of a range of Deep Impact Sockets in 1in. drive
• Deep Impact socket
• Available in range 22mm - 70mm
• Manufactured from Chrome Molybdenum

General Information

Steering Wheel Lockout Cover 500mm

• Supplied in EVA foam with clear lid
• Fully polished finish
• Manufactured from Chrome Molybdenum
• 4 x 3/8in. Drive: E10, E12, E14, E16 x 60mm long
• Contents include 5 x 1/4in. Drive UJ Sockets: E4, E5, E6, E7, E8 x 40mm long

General Information

High Voltage Floor Matting - 1 Metre. High Voltage Floor Matting - 1 Metre

• Ribbed on the underside fabric impression on upper side
• Tested to IEC611111 Class 2 rated for working voltages up to 17kV
• Flame retardant oil and acid resistant insulated floor matting

• Dimensions: Width 1000mm, Thickness 3.00mm, Weight 4.0kgs per metre

General Information

Timing Tool Kit - 1.3 JTD/HDi Fiat, GM, Suzuki, Ford, PSA

• Application: 1.3 JTD/HDi Diesel engines found in Fiat, GM, Suzuki, Ford, Citroen Nemo and Peugeot Bipper
• Timing tool kit with Camshaft/Crankshaft alignment tools only
• Made in Sheffield
• Full Engine rebuild kit available part number 4773
• Use 6408 (Camshaft Holding Tool) if removing camshaft drive gears

• Professional quality
• Twin hold on connector
• PSI/BAR (1 BAR = 100kPa)
• Rubber boot protection for gauge
• Easy to read gauge

General Information

Vibration Damper Pulley Puller - Ford 2.0 Ecoblue TDCi. Vibration Damper Pulley Puller - Ford 2.0 Ecoblue TDCi

• Performs the function of OEM 205-295 (puller), 204-158-01 (crankshaft nose protector spigot) for the applications listed only
• Application: Ford Transit, Transit Custom and Tourneo Custom Ecoblue TDCi, AWD, FWD, RWD 2016 onwards Engine codes: YLFS, YMFS, YNFS, YLF6, YMF6, YNR6, YMR6, YLR6, YNF6
• Removes the front pulley to gain access to the timing belt area

General Information

Engine Timing Tool Kit - Alfa Romeo/Fiat Multiair. Engine Timing Tool Kit - Alfa Romeo/Fiat Multiair

• Fiat Punto Evo/Punto/ Bravo 2009-2013 with engine codes 198A7.000/955A6.000, Lancia Delta 2010-2013 with engine code 955A7.000
• Applications: Alfa Romeo Mito/Giulietta Multiair105/Multiair Turbo135/163/170 from 2009-2013 with engine code/955A6.000/955A2.000/955A7.000/955A8.000/940A2.000
• Supplied in metal storage case with instructions and application list

• For use on Lambda sensors (oxygen sensors) on most modern cars This tool covers a wide variety of options and fits most heated and non-heated sensors
• Sizes: 1/2in.D: 29mm x 90mm long, 27mm x 85mm long, 22mm x 50mm long, 3/8in.D: 11/16in. x 74mm long, 22mm (7/8in.) x 80mm long, 22mm (7/8in.) x 90mm long, 22mm (7/8in.) x 30mm long
• Suitable for most modern cars including: Audi, BMW, Citroën, Ford, Mercedes-Benz, Peugeot, Renault, Skoda, Vauxhall, Volkswagen
• Manufactured from Chrome Molybdenum

General Information

Diesel Injector Remover - VAG TDi

• No solenoid removal required
• Use in accordance with OEM instructions
• Equivalent to: OEM T10402, T10415
• Engines: 1.6L TDi CR diesel & 2.0L TDi
• Applications: Volkswagen Golf 2009, Seat Ibiza 2008, Altea 2009, Leon 2009, Altea XL 2009, Altea Freetrack 2009, Toledo 2013 and Audi A3 2009/2013
• Diesel injector remover for VAG vehicles fitted with 1.6 & 2.0 CR TDi engines

General Information

Timing Tools - VAG 3cyl 6/12 valve. Timing Tools - VAG 3cyl 6/12 valve

• 6v/12v 12v tools are OEM T10123 x2 and T10121x1 with AZQ/BME Engine codes and 6v require T10120x1 and T1021x1 for AWY/BMD engine codes
• 2 and 3 cylinder
• Timing tools for Volkswagen Lupo and Polo 1.2 litre engines

General Information

Timing Tools - Land Rover/Jaguar V6. Timing Tools - Land Rover/Jaguar V6

• Camshaft sprocket timing pins 303-1126
• Camshaft Sprocket aligning tool 303-1132
• Flywheel Locking Tools - OEM 303-1117 (Automatic Transmission) 303-1116 (Manual Transmission)
• Engine Code 276D T 2004-2007
• Timing pins for Land Rover Discovery 2.7 TDV6, Range Rover Sport 2.7 TDV6 and Jaguar S Type TDVi with V6 engines with automatic and manual transmissions

• Part of the Laser Truck range
• Black phosphate finish, heavy duty construction
• 65mm
• OEM 03.364.20.03.0
• For 6 to 9 tonne conventional and Eco axles (type H/K/N)

• For 6 to 9 tonne conventional and Eco axles (type H/K/N)
• OEM 03.364.20.03.0
• 65mm
• Black phosphate finish, heavy duty construction
• Part of the Laser Truck range

• A professional socket set complete with a full compliment of accessories including ratchet, extension bars, spark plug sockets (10 & 14mm), universal joint and 17 standard sockets plus 8 deep sockets in 1/2in. drive
• Deep and standard sockets
• Manufactured from Chrome Vanadium
• Professional ratchet
• Supplied in a blow mould storage case

General Information

Diesel Injector Seat Cutter Set

• 15mm flat cutter with 19mm external diameter for other makes
• 17mm angles cutter with 21mm external diameter for Fiat, Iveco
• 17mm flat cutter with 17mm external diameter for BMW, PSA, Renault
• The 17mm Flat cutter with 17mm external diameter for BMW/Peugeot/Renault19mm Angled cutter with 21mm external diameter for Fiat/ Iveco
• Set of 4 cutters for re-cutting injector seats when reconditioning diesel engines or replacing the injectors 15mm Flat cutter for universal applications

General Information

Timing Tool Kit - Fiat/Alfa Romeo/Saab/GM JTD. Timing Tool Kit - Fiat/Alfa Romeo/Saab/GM JTD

• 14 Buffing mops
• Supplied in metal case with EVA foam
• Essential tool
• Made in Sheffield
• Fits a wide range of models
• For use on Fiat | Alfa JTD multijet diesel engines 1.6 | 1.9 | 2.4 SOHC | DOHC