Workshop Tools by Laser

• Complete with chain and hook for ease of attachment
• For use with Laser brake bleeder 4832 and other similar brake bleeders
• Universal use

General Information

Torch with Heat Shrink Tubing Set 162pc Torch with Heat Shrink Tubing Set 162pc.

General Information

Ratchet Screwdriver & 10 Bits

• Ratchet Screwdriver with forward, lock and reverse mechanism
• Bit Set in handle includes: PzDrive Pz1/Pz2/Pz3, Phillips Ph1, Ph2, Star T25/T30/T40 and Flat 5mm/7mm
• Stainless steel shaft with magnetic bit holder. Bits are manufactured from S2 Silicon Steel
• Soft ergonomic grip handle
• Knurled shaft

General Information

Oil Filter Wrench 3/8"D - 68mm x 14 Flutes

• KIA Applications: Rio 1.5L petrol (2001-2005), Sephia 1.6/1.8L petrol (1998-2001), Spectra (2000-2003)
• Subaru Applications: Baja, Forester, Legacy, Outback, Justy (2000-2012) and Smart Fortwo (2008-2015)
• Mitsubishi Applications: Outlander 2010, Mazda 323, 626, 232,CX5, MX3, MX5, MX6, Mazda 2/3/4/6/RX7/RX8/3 (2000-2015)
• Honda Civic (2002-2003), Insight Hybrid (2000-2006), S2000 (2004-2009)
• Infiniti EX35, EX37 ,FS35, FS37, G20, G25, G35, G37, JX35, M35, M37, Q50, Q60, Q70 (2000-2014)

General Information

Timing Tool Kit - 1.3 JTD/HDi Fiat, GM, Suzuki, Ford, PSA

• Application: 1.3 JTD/HDi Diesel engines found in Fiat, GM, Suzuki, Ford, Citroen Nemo and Peugeot Bipper
• Timing tool kit with Camshaft/Crankshaft alignment tools only
• Made in Sheffield
• Full Engine rebuild kit available part number 4773
• Use 6408 (Camshaft Holding Tool) if removing camshaft drive gears

General Information

Cambelt Tool Kit - for VAG Petrol FSI 1.4, 1.6

• Made in Sheffield
• This kit is suitable for use with the following replacement Cam-belt kits INA 530008910, Contitech CT957K1, Gates K025565XS
• Use one belt to transfer the drive across the camshafts depending on the engine specification the cam setting pins may be used with or without the crossbar provided
• A small but essential kit for setting the camshafts and tensioner on the popular 1.4 and 1.6 FSi petrol engines found across the VAG ranges from 1999 to 2008 these engines

General Information

Timing Tool Kit - Ford 1.25, 1.4, 1.6 16V, 1.5, 1.6 TI-VCT

• Made in Sheffield
• Also relevant to the Mazda and Volvo ranges
• Suitable for use with the following replacement belt kits INA530014010, Contitech CT881K2, Gates K025433XS
• This kit includes the alignment tool for VVT system found on many of these engines which extends the kits coverage from 1996 to 2010
• The essential camshaft and crankshaft alignment tools for the popular 1.25, 1.4, 1.6 Ford, petrol, engines

General Information

EU Registered Design

General Information

Engine Timing Tool Kit - for VAG 1.0, 1.2, 1.4L

• 18 x Deep Sockets 4mm-22mm, 13 x 1/4in.D Standard Sockets 4-14mm, 10 x 3/8in.D Standard Sockets 10-19mm, 17 x 1/2in.D Standard Sockets 10-32mm, 13 x Star Sockets E4-E24mm, 30 x 1/4in.D Socket Bits Phillips
• 3 x Plug Sockets 16mm/18mm/21mm, 3 x Universal Joints 1/4in.D, 3/8in.D and 1/2in.D, 1 x 1/4in.D Socket Driver, 3 x Bit Adaptors, 7 x Hex Keys
• A comprehensive Socket and Bit Set in 1/4in.D, 3/8in.D and 1/2in.D
• Manufactured from Chrome Vanadium with matt finish, knurled edge Sockets
• Packed in a blow mold case
• PzDrive, Star, Star Plus, Hex and Flat, 20 x 1/4in.Shank Bits, (Star, Star Tamperproof, Ribe, Spline 24 x 10mm shank bits (Star, Star Tamperproof, Hex, Flat, Phillips, PzDrive)
• Socket Accessories include: 1/4in.D, 3/8in.D, 1/2in.D x 72 teeth ratchets, 2 x Sliding T bar 1/2in.D,1/4in.D, 4 x Extension Bars 2 x 1/4in.D (100mm & 50mm) 1 x 3/8in.D, 1 x 1/2in.D

General Information

Insulated Safety Clamp 1000v

• Weight 52 grams
• Rubber contacts in the jaw protect the insulating shroud
• Jaw opening 45mm
• For use with insulated shrouding to hold the shroud in situ
• Dimensions: Length 140mm