Towing & Security by Maypole

With this trailer specific, ready to go, pre-wired socket from Maypole you can quickly and effortlessly hook up to whatever it is you are towing and be ready for the open road. The socket itself comes pre-wired with a one and half metre wire and is pre-fixed to its mounting plate, therefore making it easy for you to fit it to your vehicle. This trailer socket is suitable for all trailers using a 12v 13 pin, N type connection. It also comes with a flexible gasket to cover the socket to keep it clean and protected. Full fitting and usage instructions are supplied with the socket.

Established in 1969, Birmingham based company Maypole has a long heritage in the manufacture and supply to customers in the automotive, trailer, leisure and agricultural markets. For over 40 years Maypole have been manufacturing and supplying its products to its ever growing network of customers and are proud to continue to add to their ever increasing portfolio of products.

• Mounting plate
• 1.5m 12 core cable
• 13 pin socket assembly

The Mottez Driveway Convex Mirror is 300mm in size and will increase your vision with its convex mirror. The mirror itself has been made especially to be shatterproof should anything happened to it. The pack comes with all the fixtures included for you to mount on walls and surfaces to reduce blind spots. The mirror also has been created with a top plastic rim or lip to stop water drops obscuring your vision if it is raining.

Mottez are an established manufacturer for over 60 years. They have a wide range of products which are sold not only in the automotive world, but for industrial proposes and general use. They have sued the manufacturing expertise, alongside there dynamic workforce to create innovate and creative solution to problems. They have successfully created a wide range portfolio which shows in the depth and quality of products they offer.

• Fixings and instructions included
• Large 300mm diameter glass
• Weather resistant
• Lightweight plastic
• Convex shatterproof mirror for wider field of vision
• Gives visibility for awkward driveway pull outs
• Driveway mirror

• Integral lock and protective cover
• 3 mounting holes for bolting into concrete
• Highly visible deterrent
• Fold down, steel security post

This 7 Way By-pass Relay from Maypole is designed for use with electrical systems on caravans and trailers. It is an audible smart chip relay that runs on 12v electrics. Easy to use and fit this relay comes with full detailed instructions and is fully E approved.

Maypole are the UK's leading manufacturer of high quality towing, trailer and related leisure products. Based in Birmingham with over 40 years of experience, they are a trusted and well-known brand for their products. With over 2000 lines currently, Maypole is using their knowledge and expertise in making new and innovative products and solutions which are helping their customers. From electrical cabling, to electrical winches, and even ice scrapper, Maypole has tried to cater for the Travel and leisure markets in the UK.

• 15A
• Helps reduce test-pulse chatter
• For standard and modulated wiring

• Detailed instructions & wiring guide included

• S value - 350kg
• D value - 20kN
• Black towing jaw

• 6m trailer cable fitted with a 7 pin plug
• Powerful magnets for quick and secure attachment
• 2 EU approved reflective triangles
• 2 EU approved combination lamps (stop/tail/indicator/numberplate)
• 1.8m cable between lamps

• 2 x 8 pin plug
• 3m x 8 core curly cable
• 13 pin Extension Lead

• Lamp has CE & EMC certificates
• Low power consumption
• Toughened polycarbonate lens
• Complete with a stainless steel mounting bracket that is easy to mount onto vehicles
• Anti-corrosion diecast aluminium housing
• Waterproof and dustproof to IP67 Rating
• Extra high daylight colour temperature of 6500K
• High intensity long life LEDs

• Ingress protection to IP56
• EMC R10 approved
• Operating temperature of -30deg.C to +50deg.C
• Reverse polarity protection
• Very low power consumption
• 40 x 3W LEDs
• 3 selectable flash patterns - 360 degree rotating, low speed strobe and high speed strobe
• Can be used on either 12 or 24V vehicles
• Suitable for a wide range of vehicles

If you have a rear mounted bike rack you may be covering your number plate and vehicle lights to make sure you can be seen out on the road and are legally transporting your bikes make sure you are using a cycle carrier lighting board.

Maypole have a wide range of lighting boards for all different applications including cycle carriers. This 3 foot lighting board comes with 2meters of electrical cabling that connects to your vehicle via a 7 pin 12volt plug which will allow your lighting board to operate correctly. The lighting board comes complete with 2x four function lamps; so that includes break lights, tail lights, indicators and number plate lighting. All of the Maypole trailer lighting boards come with full E approval.

Established in 1969, Birmingham based company Maypole has a long heritage in the manufacture and marketing of products to customers in the automotive, trailer, leisure and agricultural markets. For over 40 years Maypole have been manufacturing and supplying its products to its ever growing network of customers and are proud to continue to add to their ever increasing portfolio of products.

• Polybag packed with barcode
• Reflectors: 2 x round
• Lamps; 2 x 4 function lamps (stop/tail/indicator/number plate)
• Electrics: 7 Pin, 12 Volt
• Cable length: 2m approx.
• Board length: 0.915m approx.
• E Approved
• Legal requirement if vehicle lighting is obstructed
• Cycle carrier lighting board