Car Parts & Accessories by NAPA
National Automotive Parts Association (NAPA) was created in 1925 to meet America’s need for an effective automotive parts distribution system. Today, NAPA is now sold in 9 countries worldwide – the United States of America, Canada, Mexico, Australia, New Zealand, France, Germany, Poland and the United Kingdom. Important compatibility info
| Function | Ball Joint |
| Steering arm type | for control arm |
| Number of mounting bores | 3 |
| Mounting Type | Bolted |
| Type | Ball Joint |
| Placement on Vehicle | outer, Lower, Front Axle Left, Front Axle Right |
| Paired article numbers | NST0074 |
Important compatibility info
| Function | Ball Joint |
| Steering arm type | for control arm |
| Number of mounting bores | 3 |
| Mounting Type | Bolted |
| Type | Ball Joint |
| Placement on Vehicle | outer, Lower, Front Axle Left, Front Axle Right |
| Paired article numbers | NST0074 |
Important compatibility info
| Function | Warning Contact, brake pad wear |
| Brake Type | Disc Brake |
| Length | 555 mm |
| Type | Warning Contact, brake pad wear |
| Placement on Vehicle | Rear Axle |
Important compatibility info
| Function | Warning Contact, brake pad wear |
| Brake Type | Disc Brake |
| Length | 555 mm |
| Type | Warning Contact, brake pad wear |
| Placement on Vehicle | Rear Axle |
Important compatibility info
| Extra Description | NAPA CLASSIC 20W-50 |
| Type | Engine Oil |
| Function | Engine Oil |
| Packing Type | Bottle |
| Oil | Mineral Oil |
| SAE Viscosity | 20W-50 |
| API specification | CC, SE |
| Title | Napa CLASSIC 20W-50 (1L) |
| Capacity | 1 l |
Additional Information
- Provides ultimate engine protection for older engines
- Long lasting stay-in-grade performance
- Designed specifically for classic vehicles
- Hi zinc content for ultimate protection
- API CC/SE
Important compatibility info
| Extra Description | NAPA CLASSIC 20W-50 |
| Type | Engine Oil |
| Function | Engine Oil |
| Packing Type | Bottle |
| Oil | Mineral Oil |
| SAE Viscosity | 20W-50 |
| API specification | CC, SE |
| Title | Napa CLASSIC 20W-50 (1L) |
| Capacity | 1 l |
Additional Information
- Provides ultimate engine protection for older engines
- Long lasting stay-in-grade performance
- Designed specifically for classic vehicles
- Hi zinc content for ultimate protection
- API CC/SE
Important compatibility info
| Length | 360 mm |
| Height | 40 mm |
| Width | 146 mm |
| Function | Air Filter |
| Type | Air Filter |
| Filter type | Filter Insert |
Important compatibility info
| Length | 360 mm |
| Height | 40 mm |
| Width | 146 mm |
| Function | Air Filter |
| Type | Air Filter |
| Filter type | Filter Insert |
Important compatibility info
| Type | Link/Coupling Rod, stabiliser bar |
| Thread Size | M12X1.75 |
| Rod/Strut | Coupling Rod |
| Length | 101 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | NST4628 |
Important compatibility info
| Type | Link/Coupling Rod, stabiliser bar |
| Thread Size | M12X1.75 |
| Rod/Strut | Coupling Rod |
| Length | 101 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | NST4628 |
Important compatibility info
| Type | Mounting, stabiliser bar |
| Paired article numbers | NST8189 |
| Function | Mounting, stabiliser bar |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
| Type | Mounting, stabiliser bar |
| Paired article numbers | NST8189 |
| Function | Mounting, stabiliser bar |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
| Placement on Vehicle | Front Axle |
| Thread Measurement 1 | Male M10 x 1 |
| Thread Measurement 2 | Female M10 x 1 |
| Length 1 | 370 mm |
| Type | Brake Hose |
| Function | Brake Hose |
Important compatibility info
| Placement on Vehicle | Front Axle |
| Thread Measurement 1 | Male M10 x 1 |
| Thread Measurement 2 | Female M10 x 1 |
| Length 1 | 370 mm |
| Type | Brake Hose |
| Function | Brake Hose |
Important compatibility info
| Length | 269 mm |
| Height | 30 mm |
| Width | 186 mm |
| Filter type | Activated Carbon Filter |
| Type | Filter, cabin air |
| Function | Filter, cabin air |
Important compatibility info
| Length | 269 mm |
| Height | 30 mm |
| Width | 186 mm |
| Filter type | Activated Carbon Filter |
| Type | Filter, cabin air |
| Function | Filter, cabin air |
Important compatibility info
| Function | Inner Tie Rod |
| Thread Size | M12X1.5 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Axle Joint Length | 318 mm |
| Type | Inner Tie Rod |
| Paired article numbers | NST6155 |
Important compatibility info
| Function | Inner Tie Rod |
| Thread Size | M12X1.5 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Axle Joint Length | 318 mm |
| Type | Inner Tie Rod |
| Paired article numbers | NST6155 |
Important compatibility info
| Thread Measurement 1 | Female M10 x 1 |
| Thread Measurement 2 | Female M10 x 1 |
| Length 1 | 166 mm |
| Type | Brake Hose |
| Function | Brake Hose |
Important compatibility info
| Thread Measurement 1 | Female M10 x 1 |
| Thread Measurement 2 | Female M10 x 1 |
| Length 1 | 166 mm |
| Type | Brake Hose |
| Function | Brake Hose |
Important compatibility info
| Function | Bellow, drive shaft |
| for shaft diameter | 24 mm |
| Length 1/ Length 2 | 71/88 mm |
| Joint Diameter, up to | 91 mm |
| Title | Stretchy CV Boot Kit |
| Joint diameter (mm) | 68 mm |
| to shaft diameter | 34 mm |
| Type | Bellow, drive shaft |
Additional Information
- Kit contains: CV boot, grease and small & large ear clamps
- Fitment can be done with a conventional cone (NCB9103) or using the pneumatic tool (NCB9101) which can take as little as 20 minutes
- Can be fitted to trilobal/tripod joints (see instructions)
- Fits CV joints measuring: 20-29mm (shaft), 72-96mm (joint), 84-104mm (length)
- Resistant to oil & grease, grit, abrasion, extreme temperature changes and impact damage
- Direct OE replacement
- Superior flexibility reduces wear and tear, particularly when on full turning lock
Important compatibility info
| Function | Bellow, drive shaft |
| for shaft diameter | 24 mm |
| Length 1/ Length 2 | 71/88 mm |
| Joint Diameter, up to | 91 mm |
| Title | Stretchy CV Boot Kit |
| Joint diameter (mm) | 68 mm |
| to shaft diameter | 34 mm |
| Type | Bellow, drive shaft |
Additional Information
- Kit contains: CV boot, grease and small & large ear clamps
- Fitment can be done with a conventional cone (NCB9103) or using the pneumatic tool (NCB9101) which can take as little as 20 minutes
- Can be fitted to trilobal/tripod joints (see instructions)
- Fits CV joints measuring: 20-29mm (shaft), 72-96mm (joint), 84-104mm (length)
- Resistant to oil & grease, grit, abrasion, extreme temperature changes and impact damage
- Direct OE replacement
- Superior flexibility reduces wear and tear, particularly when on full turning lock
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Material | Grey Cast Iron |
| Thread Size | 10x1 |
| Brake System | Lockheed |
| Type | Wheel Brake Cylinder |
| Function | Wheel Brake Cylinder |
| Piston Diameter | 17 mm |
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Material | Grey Cast Iron |
| Thread Size | 10x1 |
| Brake System | Lockheed |
| Type | Wheel Brake Cylinder |
| Function | Wheel Brake Cylinder |
| Piston Diameter | 17 mm |
Important compatibility info
| Inner diameter 1 | 24 mm |
| Function | Oil Filter |
| Type | Oil Filter |
| Inner diameter 2 | 24 mm |
| Outer diameter 1 | 64 mm |
| Filter type | Filter Insert |
| Height | 118 mm |
Important compatibility info
| Inner diameter 1 | 24 mm |
| Function | Oil Filter |
| Type | Oil Filter |
| Inner diameter 2 | 24 mm |
| Outer diameter 1 | 64 mm |
| Filter type | Filter Insert |
| Height | 118 mm |
Important compatibility info
| Function | Link/Coupling Rod, stabiliser bar |
| Rod/Strut | Coupling Rod |
| Type | Link/Coupling Rod, stabiliser bar |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
| Function | Link/Coupling Rod, stabiliser bar |
| Rod/Strut | Coupling Rod |
| Type | Link/Coupling Rod, stabiliser bar |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
| Diameter | 18 mm |
| Placement on Vehicle | Upper, Front Axle Left, Front Axle Right |
| Paired article numbers | NST8213 |
Important compatibility info
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
| Diameter | 18 mm |
| Placement on Vehicle | Upper, Front Axle Left, Front Axle Right |
| Paired article numbers | NST8213 |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023














