Battery by Platinum
Electrical Sub-Categories
Important compatibility info
| Terminal Layout | Positive Front Right |
| Voltage | 12 V |
| Warranty | 2 year warranty |
| Ampere-Hours | 100 Ah |
| Length | 354 mm |
| Title | AFB/EFB Leisure Battery 12V - 100Ah |
| Type | Starter Battery |
| Function | Starter Battery |
| Height | 190 mm |
| Width | 175 mm |
| Battery Type Code | 6110 AGM |
| NCC Class | A |
| Extra Description | Platinum |
| Terminal Type | T1 |
| Battery | AGM Battery |
| Hold-down Type | B13 |
Additional Information
- State Of Charge Indicator - Easy to use visual indicator to check the battery's charge and acid levels
- Low Box Model - Low Box 6110 box size available for fitment where height is an issue
- Maintenance Free - Fit & Forget - No Maintenance needed with the fully sealed range
- Up to 70 Cycles - Tested by the NCC to provide 70 complete cycles
- NCC rated Class A - Verified by the NCC the Platinum sealed range provides consumer confidence
Important compatibility info
| Hold-down Type | N |
| Terminal Layout | Positive Front Right |
| Post Positions | 9 |
| Cold Cranking Amperage (CCA) | 105 A |
| Title | Motorcycle Battery 6V - 13Ah - 105CCA |
| Length | 119 mm |
| Type | Starter Battery |
| Extra Description | Platinum |
| Ampere-Hours | 13 Ah |
| Function | Starter Battery |
| Voltage | 6 V |
| Width | 83 mm |
| Height | 161 mm |
| Terminal Type | 6 |
| Warranty | 1 year warranty |
Additional Information
- Superior Cast Grid Plate Design - Vibration resistant and improved conductivity
- Improved Active Material - Reduced paste shedding giving extended service life
- Thicker Pasted Plates - Improved performance and vibration resistance
- Dry Charged Product - Dry charged to give increased shelf life
- Acid Bottle Provided - Correct volume of acid supplied for self filling
- Through Partition Intercell Connectors - For increased starting power
- Polypropylene Case - For increased impact resistance
Important compatibility info
| Height | 170 mm |
| Terminal Type | 7 |
| Hold-down Type | N |
| Length | 185 mm |
| Width | 126 mm |
| Voltage | 12 V |
| Ampere-Hours | 24 Ah |
| Post Positions | 23 |
| Cold-test Current, EN | 190 A |
| Type | Starter Battery |
| Function | Starter Battery |
| Extra Description | Platinum |
| Cold Cranking Amperage (CCA) | 190 A |
| Terminal Layout | Positive Front Left |
| Battery Type Code | Y60-N24-A |
| Warranty | 1 year warranty |
Important compatibility info
| Voltage | 12 V |
| Terminal Layout | One terminal Front, One Terminal Back on Diagonal |
| Battery Type Code | 53030 |
| Terminal Type | 7 |
| Height | 170 mm |
| Width | 130 mm |
| Type | Starter Battery |
| Function | Starter Battery |
| Extra Description | Platinum |
| Cold-test Current, EN | 280 A |
| Cold Cranking Amperage (CCA) | 385 A |
| Title | Motorcycle Battery 12V - 30Ah - 280CCA |
| Hold-down Type | N |
| Length | 186 mm |
| Ampere-Hours | 30 Ah |
| Warranty | 1 year warranty |
Additional Information
- Polypropylene Case - For increased impact resistance
- Through Partition Intercell Connectors - For increased starting power
- Acid Bottle Provided - Correct volume of acid supplied for self filling
- Dry Charged Product - Dry charged to give increased shelf life
- Thicker Pasted Plates - Improved performance and vibration resistance
- Improved Active Material - Reduced paste shedding giving extended service life
- Superior Cast Grid Plate Design - Vibration resistant and improved conductivity
Important compatibility info
| Terminal Layout | Positive Front Right |
| Battery Type Code | 51913 |
| Ampere-Hours | 19 Ah |
| Height | 171 mm |
| Function | Starter Battery |
| Type | Starter Battery |
| Extra Description | Platinum |
| Cold Cranking Amperage (CCA) | 255 A |
| Hold-down Type | N |
| Title | Motorcycle Battery 12V - 19Ah - 170CCA |
| Length | 187 mm |
| Width | 83 mm |
| Voltage | 12 V |
| Terminal Type | 7 |
| Warranty | 1 year warranty |
Additional Information
- Polypropylene Case - For increased impact resistance
- Through Partition Intercell Connectors - For increased starting power
- Acid Bottle Provided - Correct volume of acid supplied for self filling
- Dry Charged Product - Dry charged to give increased shelf life
- Thicker Pasted Plates - Improved performance and vibration resistance
- Improved Active Material - Reduced paste shedding giving extended service life
- Superior Cast Grid Plate Design - Vibration resistant and improved conductivity
Important compatibility info
| Hold-down Type | N |
| Height | 176 mm |
| Length | 135 mm |
| Terminal Type | 7 |
| Cold Cranking Amperage (CCA) | 120 A |
| Width | 81 mm |
| Voltage | 12 V |
| Function | Starter Battery |
| Type | Starter Battery |
| Terminal Layout | Positive Front Left |
| Battery Type Code | YB12C-A |
| Extra Description | Platinum |
| Ampere-Hours | 13 Ah |
| Post Positions | 23 |
| Cold-test Current, EN | 120 A |
| Warranty | 1 year warranty |
Important compatibility info
| Hold-down Type | N |
| Extra Description | Platinum |
| Type | Starter Battery |
| Title | Motorcycle Battery 12V - 16Ah - 145CCA |
| Cold Cranking Amperage (CCA) | 255 A |
| Terminal Type | 7 |
| Length | 175 mm |
| Height | 155 mm |
| Width | 100 mm |
| Voltage | 12 V |
| Ampere-Hours | 16 Ah |
| Terminal Layout | Positive Front Left |
| Post Positions | 21 |
| Function | Starter Battery |
| Battery Type Code | YB16-B |
| Warranty | 1 year warranty |
Additional Information
- Polypropylene Case - For increased impact resistance
- Through Partition Intercell Connectors - For increased starting power
- Acid Bottle Provided - Correct volume of acid supplied for self filling
- Dry Charged Product - Dry charged to give increased shelf life
- Thicker Pasted Plates - Improved performance and vibration resistance
- Improved Active Material - Reduced paste shedding giving extended service life
- Superior Cast Grid Plate Design - Vibration resistant and improved conductivity
Important compatibility info
| Terminal Type | 7 |
| Hold-down Type | N |
| Length | 205 mm |
| Height | 162 mm |
| Width | 70 mm |
| Voltage | 12 V |
| Ampere-Hours | 16 Ah |
| Type | Starter Battery |
| Function | Starter Battery |
| Extra Description | Platinum |
| Title | Motorcycle Battery 12V - 16Ah - 210CCA |
| Cold Cranking Amperage (CCA) | 210 A |
| Terminal Layout | Positive Front Right |
| Battery Type Code | YB16AL-A2 |
| Warranty | 1 year warranty |
Additional Information
- Superior Cast Grid Plate Design - Vibration resistant and improved conductivity
- Improved Active Material - Reduced paste shedding giving extended service life
- Thicker Pasted Plates - Improved performance and vibration resistance
- Dry Charged Product - Dry charged to give increased shelf life
- Acid Bottle Provided - Correct volume of acid supplied for self filling
- Through Partition Intercell Connectors - For increased starting power
- Polypropylene Case - For increased impact resistance
Important compatibility info
| Type | Starter Battery |
| Hold-down Type | N |
| Warranty | 1 year warranty |
| Battery Type Code | YB16B-A |
| Width | 90 mm |
| Title | Motorcycle Battery 12V - 16Ah - 200CCA |
| Cold Cranking Amperage (CCA) | 200 A |
| Terminal Layout | Positive Front Left |
| Height | 158 mm |
| Terminal Type | 7 |
| Voltage | 12 V |
| Length | 160 mm |
| Extra Description | Platinum |
| Function | Starter Battery |
| Cold-test Current, EN | 200 A |
| Post Positions | 23 |
| Ampere-Hours | 16 Ah |
Additional Information
- Superior Cast Grid Plate Design - Vibration resistant and improved conductivity
- Improved Active Material - Reduced paste shedding giving extended service life
- Thicker Pasted Plates - Improved performance and vibration resistance
- Dry Charged Product - Dry charged to give increased shelf life
- Acid Bottle Provided - Correct volume of acid supplied for self filling
- Through Partition Intercell Connectors - For increased starting power
- Polypropylene Case - For increased impact resistance
Important compatibility info
| Terminal Type | 7 |
| Hold-down Type | N |
| Length | 175 mm |
| Height | 175 mm |
| Width | 100 mm |
| Voltage | 12 V |
| Ampere-Hours | 19 Ah |
| Post Positions | 14 |
| Cold-test Current, EN | 240 A |
| Type | Starter Battery |
| Function | Starter Battery |
| Extra Description | Platinum |
| Cold Cranking Amperage (CCA) | 240 A |
| Terminal Layout | Positive Front Right |
| Battery Type Code | YB16CL-B |
| Warranty | 1 year warranty |
Important compatibility info
| Hold-down Type | N |
| Extra Description | Platinum |
| Ampere-Hours | 19 Ah |
| Battery Type Code | YB16L-B |
| Voltage | 12 V |
| Width | 100 mm |
| Length | 175 mm |
| Height | 155 mm |
| Title | Motorcycle Battery 12V - 19Ah - 220CCA |
| Post Positions | 14 |
| Cold-test Current, EN | 220 A |
| Type | Starter Battery |
| Function | Starter Battery |
| Terminal Layout | Positive Front Right |
| Cold Cranking Amperage (CCA) | 220 A |
| Terminal Type | 6 |
| Warranty | 1 year warranty |
Additional Information
- Superior Cast Grid Plate Design - Vibration resistant and improved conductivity
- Improved Active Material - Reduced paste shedding giving extended service life
- Thicker Pasted Plates - Improved performance and vibration resistance
- Dry Charged Product - Dry charged to give increased shelf life
- Acid Bottle Provided - Correct volume of acid supplied for self filling
- Through Partition Intercell Connectors - For increased starting power
- Polypropylene Case - For increased impact resistance
Important compatibility info
| Voltage | 12 V |
| Height | 105 mm |
| Length | 80 mm |
| Cold-test Current, EN | 15 A |
| Ampere-Hours | 3 Ah |
| Post Positions | 15 |
| Extra Description | Platinum |
| Terminal Type | 2 & 3 |
| Type | Starter Battery |
| Function | Starter Battery |
| Cold Cranking Amperage (CCA) | 15 A |
| Battery Type Code | YB2.5L-C |
| Width | 70 mm |
| Hold-down Type | N |
| Warranty | 1 year warranty |
Important compatibility info
| Terminal Type | 6 |
| Hold-down Type | N |
| Length | 137 mm |
| Height | 134 mm |
| Width | 75 mm |
| Voltage | 12 V |
| Ampere-Hours | 8 Ah |
| Post Positions | 23 |
| Cold-test Current, EN | 105 A |
| Type | Starter Battery |
| Function | Starter Battery |
| Extra Description | Platinum |
| Title | Motorcycle Battery 12V - 8Ah - 105CCA |
| Cold Cranking Amperage (CCA) | 105 A |
| Terminal Layout | Positive Front Right |
| Battery Type Code | YB7-A |
| Warranty | 1 year warranty |
Additional Information
- Superior Cast Grid Plate Design - Vibration resistant and improved conductivity
- Improved Active Material - Reduced paste shedding giving extended service life
- Thicker Pasted Plates - Improved performance and vibration resistance
- Dry Charged Product - Dry charged to give increased shelf life
- Acid Bottle Provided - Correct volume of acid supplied for self filling
- Through Partition Intercell Connectors - For increased starting power
- Polypropylene Case - For increased impact resistance
Important compatibility info
| Voltage | 12 V |
| Title | Motorcycle Battery 12V - 9Ah - 110CCA |
| Width | 75 mm |
| Height | 139 mm |
| Length | 135 mm |
| Type | Starter Battery |
| Extra Description | Platinum |
| Function | Starter Battery |
| Ampere-Hours | 9 Ah |
| Cold-test Current, EN | 100 A |
| Battery Type Code | YB9L-A2 |
| Terminal Layout | Positive Front Right |
| Cold Cranking Amperage (CCA) | 110 A |
| Terminal Type | 7 |
| Hold-down Type | N |
| Warranty | 1 year warranty |
Additional Information
- Superior Cast Grid Plate Design - Vibration resistant and improved conductivity
- Improved Active Material - Reduced paste shedding giving extended service life
- Thicker Pasted Plates - Improved performance and vibration resistance
- Dry Charged Product - Dry charged to give increased shelf life
- Acid Bottle Provided - Correct volume of acid supplied for self filling
- Through Partition Intercell Connectors - For increased starting power
- Polypropylene Case - For increased impact resistance
Important compatibility info
| Ampere-Hours | 10 Ah |
| Post Positions | 21 |
| Cold Cranking Amperage (CCA) | 175 A |
| Battery Type Code | YT12A-BS |
| Length | 150 mm |
| Height | 106 mm |
| Terminal Type | 7 |
| Voltage | 12 V |
| Terminal Layout | Positive Front Left |
| Width | 87 mm |
| Title | Motorcycle MF AGM Battery 12V - 9.5Ah - 130CCA |
| Extra Description | Platinum |
| Function | Starter Battery |
| Type | Starter Battery |
| Hold-down Type | N |
| Warranty | 1 year warranty |
Additional Information
- Polypropylene Case - For increased impact resistance
- Vent With Flame Arrestor - Resists high internal pressures negating internal component damage
- Lead Calcium Grid Alloy - Increased electrical performance with a longer shelf and service life
- AGM (Absorbed Glass Mat) Separator - Longer service life (increased charge and discharge compatibility) with maximum vibration resistance - A totally sealed unit that can be fitted in any orientation
- Factory Activated Product - Received in fully charged condition
Important compatibility info
| Type | Starter Battery |
| Function | Starter Battery |
| Terminal Type | 7 |
| Extra Description | Platinum |
| Ampere-Hours | 10 Ah |
| Width | 69 mm |
| Height | 130 mm |
| Terminal Layout | Positive Front Left |
| Post Positions | 21 |
| Hold-down Type | N |
| Title | Motorcycle MF Battery 12V - 10Ah - 125CCA |
| Cold Cranking Amperage (CCA) | 210 A |
| Battery Type Code | GT12B-4 |
| Voltage | 12 V |
| Length | 150 mm |
| Warranty | 1 year warranty |
Additional Information
- Polypropylene Case - For increased impact resistance
- Through Partition Intercell Connectors - For increased starting power
- Acid Bottle Provided - Correct volume of acid supplied for self filling
- Dry Charged Product - Dry charged to give increased shelf life
- Thicker Pasted Plates - Improved performance and vibration resistance
- Improved Active Material - Reduced paste shedding giving extended service life
- Superior Cast Grid Plate Design - Vibration resistant and improved conductivity
Important compatibility info
| Hold-down Type | N |
| Terminal Type | 7 |
| Length | 150 mm |
| Height | 145 mm |
| Width | 69 mm |
| Voltage | 12 V |
| Ampere-Hours | 12 Ah |
| Post Positions | 21 |
| Type | Starter Battery |
| Function | Starter Battery |
| Extra Description | Platinum |
| Title | Motorcycle MF Battery 12V - 12Ah - 135CCA |
| Cold Cranking Amperage (CCA) | 210 A |
| Terminal Layout | Positive Front Left |
| Battery Type Code | YT14B-4 |
| Warranty | 1 year warranty |
Additional Information
- Polypropylene Case - For increased impact resistance
- Through Partition Intercell Connectors - For increased starting power
- Acid Bottle Provided - Correct volume of acid supplied for self filling
- Dry Charged Product - Dry charged to give increased shelf life
- Thicker Pasted Plates - Improved performance and vibration resistance
- Improved Active Material - Reduced paste shedding giving extended service life
- Superior Cast Grid Plate Design - Vibration resistant and improved conductivity
Important compatibility info
| Height | 86 mm |
| Length | 114 mm |
| Hold-down Type | N |
| Width | 71 mm |
| Terminal Type | 7 |
| Voltage | 12 V |
| Extra Description | Platinum |
| Type | Starter Battery |
| Function | Starter Battery |
| Terminal Layout | Positive Front Right |
| Battery Type Code | YT4L-BS |
| Ampere-Hours | 4 Ah |
| Title | Motorcycle MF AGM Battery 12V - 4Ah - 60CCA |
| Cold Cranking Amperage (CCA) | 65 A |
| Cold-test Current, EN | 65 A |
| Warranty | 1 year warranty |
Additional Information
- Polypropylene Case - For increased impact resistance
- Vent With Flame Arrestor - Resists high internal pressures negating internal component damage
- Lead Calcium Grid Alloy - Increased electrical performance with a longer shelf and service life
- AGM (Absorbed Glass Mat) Separator - Longer service life (increased charge and discharge compatibility) with maximum vibration resistance - A totally sealed unit that can be fitted in any orientation
- Factory Activated Product - Received in fully charged condition
Important compatibility info
| Width | 65 mm |
| Battery Type Code | YT7B-4 |
| Length | 150 mm |
| Ampere-Hours | 6 Ah |
| Post Positions | 21 |
| Type | Starter Battery |
| Function | Starter Battery |
| Height | 92 mm |
| Extra Description | Platinum |
| Cold Cranking Amperage (CCA) | 110 A |
| Terminal Layout | Positive Front Left |
| Title | Motorcycle MF AGM Battery 12V - 6.5Ah - 85CCA |
| Terminal Type | 7 |
| Hold-down Type | N |
| Voltage | 12 V |
| Warranty | 1 year warranty |
Additional Information
- Polypropylene Case - For increased impact resistance
- Vent With Flame Arrestor - Resists high internal pressures negating internal component damage
- Lead Calcium Grid Alloy - Increased electrical performance with a longer shelf and service life
- AGM (Absorbed Glass Mat) Separator - Longer service life (increased charge and discharge compatibility) with maximum vibration resistance - A totally sealed unit that can be fitted in any orientation
- Factory Activated Product - Received in fully charged condition
Important compatibility info
| Extra Description | Platinum |
| Post Positions | 21 |
| Type | Starter Battery |
| Function | Starter Battery |
| Cold Cranking Amperage (CCA) | 120 A |
| Height | 105 mm |
| Length | 150 mm |
| Ampere-Hours | 8 Ah |
| Terminal Type | 7 |
| Hold-down Type | N |
| Terminal Layout | Positive Front Left |
| Title | Motorcycle MF AGM Battery 12V - 8Ah - 115CCA |
| Width | 69 mm |
| Voltage | 12 V |
| Battery Type Code | YT9B-4 |
| Warranty | 1 year warranty |
Additional Information
- Polypropylene Case - For increased impact resistance
- Vent With Flame Arrestor - Resists high internal pressures negating internal component damage
- Lead Calcium Grid Alloy - Increased electrical performance with a longer shelf and service life
- AGM (Absorbed Glass Mat) Separator - Longer service life (increased charge and discharge compatibility) with maximum vibration resistance - A totally sealed unit that can be fitted in any orientation
- Factory Activated Product - Received in fully charged condition
Important compatibility info
| Terminal Type | 7 |
| Hold-down Type | N |
| Ampere-Hours | 10 Ah |
| Extra Description | Platinum |
| Type | Starter Battery |
| Function | Starter Battery |
| Length | 135 mm |
| Height | 146 mm |
| Width | 90 mm |
| Terminal Layout | Positive Front Right |
| Battery Type Code | YB10L-A2 |
| Voltage | 12 V |
| Cold Cranking Amperage (CCA) | 120 A |
| Title | Motorcycle MF AGM Battery 12V - 10Ah - 160CCA |
| Warranty | 1 year warranty |
Additional Information
- Polypropylene Case - For increased impact resistance
- Vent With Flame Arrestor - Resists high internal pressures negating internal component damage
- Lead Calcium Grid Alloy - Increased electrical performance with a longer shelf and service life
- AGM (Absorbed Glass Mat) Separator - Longer service life (increased charge and discharge compatibility) with maximum vibration resistance - A totally sealed unit that can be fitted in any orientation
- Factory Activated Product - Received in fully charged condition
Important compatibility info
| Hold-down Type | N |
| Terminal Type | 7 |
| Length | 134 mm |
| Height | 161 mm |
| Width | 80 mm |
| Voltage | 12 V |
| Ampere-Hours | 12 Ah |
| Post Positions | 21 |
| Type | Starter Battery |
| Function | Starter Battery |
| Extra Description | Platinum |
| Title | Motorcycle MF AGM Battery 12V - 12Ah - 160CCA |
| Cold Cranking Amperage (CCA) | 150 A |
| Terminal Layout | Positive Front Left |
| Battery Type Code | YB12A-A |
| Warranty | 1 year warranty |
Additional Information
- Polypropylene Case - For increased impact resistance
- Vent With Flame Arrestor - Resists high internal pressures negating internal component damage
- Lead Calcium Grid Alloy - Increased electrical performance with a longer shelf and service life
- AGM (Absorbed Glass Mat) Separator - Longer service life (increased charge and discharge compatibility) with maximum vibration resistance - A totally sealed unit that can be fitted in any orientation
- Factory Activated Product - Received in fully charged condition
Important compatibility info
| Voltage | 12 V |
| Function | Starter Battery |
| Title | Motorcycle MF AGM Battery 12V - 12Ah - 160CCA |
| Ampere-Hours | 12 Ah |
| Width | 80 mm |
| Cold Cranking Amperage (CCA) | 150 A |
| Height | 161 mm |
| Length | 134 mm |
| Type | Starter Battery |
| Extra Description | Platinum |
| Battery Type Code | YB12AL-A |
| Terminal Layout | Positive Front Right |
| Terminal Type | 7 |
| Hold-down Type | N |
| Warranty | 1 year warranty |
Additional Information
- Polypropylene Case - For increased impact resistance
- Vent With Flame Arrestor - Resists high internal pressures negating internal component damage
- Lead Calcium Grid Alloy - Increased electrical performance with a longer shelf and service life
- AGM (Absorbed Glass Mat) Separator - Longer service life (increased charge and discharge compatibility) with maximum vibration resistance - A totally sealed unit that can be fitted in any orientation
- Factory Activated Product - Received in fully charged condition
Important compatibility info
| Title | Motorcycle MF AGM Battery 12V - 14Ah - 210CCA |
| Battery Type Code | YB14-A2 |
| Cold Cranking Amperage (CCA) | 210 A |
| Terminal Type | 7 |
| Terminal Layout | Positive Front Left |
| Type | Starter Battery |
| Post Positions | 21 |
| Function | Starter Battery |
| Hold-down Type | N |
| Extra Description | Platinum |
| Width | 89 mm |
| Voltage | 12 V |
| Ampere-Hours | 13 Ah |
| Length | 135 mm |
| Height | 160 mm |
| Warranty | 1 year warranty |
Additional Information
- Polypropylene Case - For increased impact resistance
- Vent With Flame Arrestor - Resists high internal pressures negating internal component damage
- Lead Calcium Grid Alloy - Increased electrical performance with a longer shelf and service life
- AGM (Absorbed Glass Mat) Separator - Longer service life (increased charge and discharge compatibility) with maximum vibration resistance - A totally sealed unit that can be fitted in any orientation
- Factory Activated Product - Received in fully charged condition
Important compatibility info
| Cold Cranking Amperage (CCA) | 210 A |
| Terminal Layout | Positive Front Right |
| Terminal Type | 7 |
| Battery Type Code | YB14L-A2 |
| Title | Motorcycle MF AGM Battery 12V - 14Ah - 210CCA |
| Ampere-Hours | 13 Ah |
| Extra Description | Platinum |
| Function | Starter Battery |
| Type | Starter Battery |
| Width | 89 mm |
| Length | 135 mm |
| Height | 160 mm |
| Hold-down Type | N |
| Voltage | 12 V |
| Warranty | 1 year warranty |
Additional Information
- Polypropylene Case - For increased impact resistance
- Vent With Flame Arrestor - Resists high internal pressures negating internal component damage
- Lead Calcium Grid Alloy - Increased electrical performance with a longer shelf and service life
- AGM (Absorbed Glass Mat) Separator - Longer service life (increased charge and discharge compatibility) with maximum vibration resistance - A totally sealed unit that can be fitted in any orientation
- Factory Activated Product - Received in fully charged condition
Important compatibility info
| Ampere-Hours | 3 Ah |
| Title | Motorcycle MF AGM Battery 12V - 3Ah - 35CCA |
| Extra Description | Platinum |
| Voltage | 12 V |
| Width | 56 mm |
| Terminal Layout | Positive Front Right |
| Length | 98 mm |
| Cold Cranking Amperage (CCA) | 30 A |
| Height | 109 mm |
| Battery Type Code | 6N6-3B |
| Type | Starter Battery |
| Function | Starter Battery |
| Terminal Type | 7 |
| Hold-down Type | N |
| Warranty | 1 year warranty |
Additional Information
- Polypropylene Case - For increased impact resistance
- Vent With Flame Arrestor - Resists high internal pressures negating internal component damage
- Lead Calcium Grid Alloy - Increased electrical performance with a longer shelf and service life
- AGM (Absorbed Glass Mat) Separator - Longer service life (increased charge and discharge compatibility) with maximum vibration resistance - A totally sealed unit that can be fitted in any orientation
- Factory Activated Product - Received in fully charged condition
Important compatibility info
| Voltage | 12 V |
| Battery Type Code | YB4L-B |
| Length | 120 mm |
| Height | 91 mm |
| Width | 71 mm |
| Cold Cranking Amperage (CCA) | 45 A |
| Function | Starter Battery |
| Type | Starter Battery |
| Terminal Layout | Positive Front Right |
| Terminal Type | 7 |
| Title | Motorcycle MF AGM Battery 12V - 4Ah - 50CCA |
| Ampere-Hours | 4 Ah |
| Extra Description | Platinum |
| Hold-down Type | N |
| Warranty | 1 year warranty |
Additional Information
- Polypropylene Case - For increased impact resistance
- Vent With Flame Arrestor - Resists high internal pressures negating internal component damage
- Lead Calcium Grid Alloy - Increased electrical performance with a longer shelf and service life
- AGM (Absorbed Glass Mat) Separator - Longer service life (increased charge and discharge compatibility) with maximum vibration resistance - A totally sealed unit that can be fitted in any orientation
- Factory Activated Product - Received in fully charged condition
Important compatibility info
| Terminal Type | 7 |
| Height | 132 mm |
| Width | 61 mm |
| Title | Motorcycle MF AGM Battery 12V - 5Ah - 70CCA |
| Terminal Layout | Positive Front Right |
| Cold Cranking Amperage (CCA) | 60 A |
| Function | Starter Battery |
| Hold-down Type | N |
| Ampere-Hours | 5 Ah |
| Type | Starter Battery |
| Voltage | 12 V |
| Length | 120 mm |
| Battery Type Code | YB5L-B |
| Extra Description | Platinum |
| Warranty | 1 year warranty |
Additional Information
- Polypropylene Case - For increased impact resistance
- Vent With Flame Arrestor - Resists high internal pressures negating internal component damage
- Lead Calcium Grid Alloy - Increased electrical performance with a longer shelf and service life
- AGM (Absorbed Glass Mat) Separator - Longer service life (increased charge and discharge compatibility) with maximum vibration resistance - A totally sealed unit that can be fitted in any orientation
- Factory Activated Product - Received in fully charged condition
Important compatibility info
| Width | 76 mm |
| Title | Motorcycle MF AGM Battery 12V - 9Ah - 100CCA |
| Height | 139 mm |
| Cold Cranking Amperage (CCA) | 110 A |
| Ampere-Hours | 9 Ah |
| Hold-down Type | N |
| Cold-test Current, EN | 110 A |
| Post Positions | 21 |
| Terminal Type | 7 |
| Length | 136 mm |
| Extra Description | Platinum |
| Function | Starter Battery |
| Terminal Layout | Positive Front Left |
| Battery Type Code | YB9-B |
| Voltage | 12 V |
| Type | Starter Battery |
| Warranty | 1 year warranty |
Additional Information
- Polypropylene Case - For increased impact resistance
- Vent With Flame Arrestor - Resists high internal pressures negating internal component damage
- Lead Calcium Grid Alloy - Increased electrical performance with a longer shelf and service life
- AGM (Absorbed Glass Mat) Separator - Longer service life (increased charge and discharge compatibility) with maximum vibration resistance - A totally sealed unit that can be fitted in any orientation
- Factory Activated Product - Received in fully charged condition
Important compatibility info
| Post Positions | 21 |
| Extra Description | Platinum |
| Length | 151 mm |
| Width | 87 mm |
| Height | 131 mm |
| Type | Starter Battery |
| Function | Starter Battery |
| Terminal Type | 7 |
| Hold-down Type | N |
| Voltage | 12 V |
| Ampere-Hours | 10 Ah |
| Battery Type Code | YTX12-BS Compatible |
| Title | Motorcycle MF AGM Battery 12V - 12Ah - 170CCA |
| Cold Cranking Amperage (CCA) | 180 A |
| Terminal Layout | Positive Front Left |
| Warranty | 1 year warranty |
Additional Information
- Polypropylene Case - For increased impact resistance
- Vent With Flame Arrestor - Resists high internal pressures negating internal component damage
- Lead Calcium Grid Alloy - Increased electrical performance with a longer shelf and service life
- AGM (Absorbed Glass Mat) Separator - Longer service life (increased charge and discharge compatibility) with maximum vibration resistance - A totally sealed unit that can be fitted in any orientation
- Factory Activated Product - Received in fully charged condition
Important compatibility info
| Function | Starter Battery |
| Type | Starter Battery |
| Post Positions | 21 |
| Ampere-Hours | 12 Ah |
| Extra Description | Platinum |
| Title | Motorcycle MF AGM Battery 12V - 12Ah - 170CCA |
| Cold Cranking Amperage (CCA) | 170 A |
| Terminal Layout | Positive Front Left |
| Voltage | 12 V |
| Battery Type Code | YTX14-BS Compatible |
| Width | 87 mm |
| Height | 146 mm |
| Length | 151 mm |
| Terminal Type | 7 |
| Hold-down Type | N |
| Warranty | 1 year warranty |
Additional Information
- Polypropylene Case - For increased impact resistance
- Vent With Flame Arrestor - Resists high internal pressures negating internal component damage
- Lead Calcium Grid Alloy - Increased electrical performance with a longer shelf and service life
- AGM (Absorbed Glass Mat) Separator - Longer service life (increased charge and discharge compatibility) with maximum vibration resistance - A totally sealed unit that can be fitted in any orientation
- Factory Activated Product - Received in fully charged condition
Important compatibility info
| Hold-down Type | N |
| Terminal Type | 7 |
| Length | 151 mm |
| Height | 146 mm |
| Width | 87 mm |
| Voltage | 12 V |
| Ampere-Hours | 12 Ah |
| Cold-test Current, EN | 240 A |
| Type | Starter Battery |
| Function | Starter Battery |
| Extra Description | Platinum |
| Title | Motorcycle MF AGM Battery 12V - 12Ah - 170CCA |
| Cold Cranking Amperage (CCA) | 240 A |
| Terminal Layout | Positive Front Right |
| Battery Type Code | YTX14L-BS Compatible |
| Warranty | 1 year warranty |
Additional Information
- Polypropylene Case - For increased impact resistance
- Vent With Flame Arrestor - Resists high internal pressures negating internal component damage
- Lead Calcium Grid Alloy - Increased electrical performance with a longer shelf and service life
- AGM (Absorbed Glass Mat) Separator - Longer service life (increased charge and discharge compatibility) with maximum vibration resistance - A totally sealed unit than can be fitted in any orientation
- Factory Activated Product - Received in fully charged condition
Important compatibility info
| Hold-down Type | N |
| Terminal Type | 7 |
| Length | 151 mm |
| Height | 161 mm |
| Width | 87 mm |
| Voltage | 12 V |
| Ampere-Hours | 14 Ah |
| Post Positions | 21 |
| Type | Starter Battery |
| Function | Starter Battery |
| Extra Description | Platinum |
| Title | Motorcycle MF AGM Battery 12V - 14Ah - 165CCA |
| Cold Cranking Amperage (CCA) | 270 A |
| Terminal Layout | Positive Front Left |
| Battery Type Code | YTX16-BS Compatible |
| Warranty | 1 year warranty |
Additional Information
- Polypropylene Case - For increased impact resistance
- Vent With Flame Arrestor - Resists high internal pressures negating internal component damage
- Lead Calcium Grid Alloy - Increased electrical performance with a longer shelf and service life
- AGM (Absorbed Glass Mat) Separator - Longer service life (increased charge and discharge compatibility) with maximum vibration resistance - A totally sealed unit that can be fitted in any orientation
- Factory Activated Product - Received in fully charged condition
Important compatibility info
| Length | 175 mm |
| Height | 175 mm |
| Width | 100 mm |
| Voltage | 12 V |
| Ampere-Hours | 21 Ah |
| Type | Starter Battery |
| Function | Starter Battery |
| Extra Description | Platinum |
| Title | Motorcycle MF AGM Battery 12V - 19Ah - 260CCA |
| Cold Cranking Amperage (CCA) | 240 A |
| Terminal Layout | Positive Front Right |
| Battery Type Code | YB16CL-B |
| Terminal Type | 7 |
| Hold-down Type | N |
| Warranty | 1 year warranty |
Additional Information
- Polypropylene Case - For increased impact resistance
- Vent With Flame Arrestor - Resists high internal pressures negating internal component damage
- Lead Calcium Grid Alloy - Increased electrical performance with a longer shelf and service life
- AGM (Absorbed Glass Mat) Separator - Longer service life (increased charge and discharge compatibility) with maximum vibration resistance - A totally sealed unit that can be fitted in any orientation
- Factory Activated Product - Received in fully charged condition
Important compatibility info
| Terminal Type | 7 |
| Hold-down Type | N |
| Length | 175 mm |
| Height | 155 mm |
| Width | 87 mm |
| Voltage | 12 V |
| Ampere-Hours | 18 Ah |
| Type | Starter Battery |
| Function | Starter Battery |
| Extra Description | Platinum |
| Title | Motorcycle MF AGM Battery 12V - 20Ah - 260CCA |
| Cold Cranking Amperage (CCA) | 310 A |
| Terminal Layout | Positive Front Right |
| Battery Type Code | YTX20L-BS Compatible |
| Warranty | 1 year warranty |
Additional Information
- Polypropylene Case - For increased impact resistance
- Vent With Flame Arrestor - Resists high internal pressures negating internal component damage
- Lead Calcium Grid Alloy - Increased electrical performance with a longer shelf and service life
- AGM (Absorbed Glass Mat) Separator - Longer service life (increased charge and discharge compatibility) with maximum vibration resistance - A totally sealed unit that can be fitted in any orientation
- Factory Activated Product - Received in fully charged condition
Important compatibility info
| Hold-down Type | N |
| Terminal Type | 7 |
| Post Positions | 21 |
| Ampere-Hours | 6 Ah |
| Battery Type Code | YTX7A-BS Compatible |
| Length | 151 mm |
| Title | Motorcycle MF AGM Battery 12V - 7Ah - 100CCA |
| Cold Cranking Amperage (CCA) | 105 A |
| Terminal Layout | Positive Front Left |
| Type | Starter Battery |
| Function | Starter Battery |
| Extra Description | Platinum |
| Voltage | 12 V |
| Width | 87 mm |
| Height | 95 mm |
| Warranty | 1 year warranty |
Additional Information
- Polypropylene Case - For increased impact resistance
- Vent With Flame Arrestor - Resists high internal pressures negating internal component damage
- Lead Calcium Grid Alloy - Increased electrical performance with a longer shelf and service life
- AGM (Absorbed Glass Mat) Separator - Longer service life (increased charge and discharge compatibility) with maximum vibration resistance - A totally sealed unit that can be fitted in any orientation
- Factory Activated Product - Received in fully charged condition
Important compatibility info
| Terminal Layout | Positive Front Right |
| Type | Starter Battery |
| Function | Starter Battery |
| Hold-down Type | N |
| Battery Type Code | YTX7L-BS Compatible |
| Title | Motorcycle MF AGM Battery 12V - 7Ah - 75CCA |
| Voltage | 12 V |
| Ampere-Hours | 6 Ah |
| Terminal Type | 7 |
| Extra Description | Platinum |
| Length | 114 mm |
| Width | 69 mm |
| Cold Cranking Amperage (CCA) | 100 A |
| Height | 134 mm |
| Warranty | 1 year warranty |
Additional Information
- Polypropylene Case - For increased impact resistance
- Vent With Flame Arrestor - Resists high internal pressures negating internal component damage
- Lead Calcium Grid Alloy - Increased electrical performance with a longer shelf and service life
- AGM (Absorbed Glass Mat) Separator - Longer service life (increased charge and discharge compatibility) with maximum vibration resistance - A totally sealed unit that can be fitted in any orientation
- Factory Activated Product - Received in fully charged condition
Important compatibility info
| Terminal Layout | Positive Front Left |
| Cold Cranking Amperage (CCA) | 135 A |
| Length | 151 mm |
| Width | 87 mm |
| Height | 107 mm |
| Battery Type Code | YTX9-BS Compatible |
| Voltage | 12 V |
| Title | Motorcycle MF AGM Battery 12V - 9Ah - 120CCA |
| Function | Starter Battery |
| Post Positions | 21 |
| Ampere-Hours | 8 Ah |
| Hold-down Type | N |
| Extra Description | Platinum |
| Type | Starter Battery |
| Terminal Type | 7 |
| Warranty | 1 year warranty |
Additional Information
- Polypropylene Case - For increased impact resistance
- Vent With Flame Arrestor - Resists high internal pressures negating internal component damage
- Lead Calcium Grid Alloy - Increased electrical performance with a longer shelf and service life
- AGM (Absorbed Glass Mat) Separator - Longer service life (increased charge and discharge compatibility) with maximum vibration resistance - A totally sealed unit that can be fitted in any orientation
- Factory Activated Product - Received in fully charged condition
Important compatibility info
| Cold Cranking Amperage (CCA) | 190 A |
| Battery Type Code | YTZ10S Compatible |
| Terminal Layout | Positive Front Left |
| Voltage | 12 V |
| Length | 151 mm |
| Function | Starter Battery |
| Type | Starter Battery |
| Width | 87 mm |
| Cold-test Current, EN | 190 A |
| Post Positions | 21 |
| Ampere-Hours | 9 Ah |
| Title | Motorcycle MF AGM Battery 12V - 8.6Ah - 140CCA |
| Hold-down Type | N |
| Terminal Type | 7 |
| Height | 94 mm |
| Extra Description | Platinum |
| Warranty | 1 year warranty |
Additional Information
- Polypropylene Case - For increased impact resistance
- Vent With Flame Arrestor - Resists high internal pressures negating internal component damage
- Lead Calcium Grid Alloy - Increased electrical performance with a longer shelf and service life
- AGM (Absorbed Glass Mat) Separator - Longer service life (increased charge and discharge compatibility) with maximum vibration resistance - A totally sealed unit that can be fitted in any orientation
- Factory Activated Product - Received in fully charged condition
Important compatibility info
| Type | Starter Battery |
| Terminal Layout | Positive Front Left |
| Hold-down Type | N |
| Terminal Type | 7 |
| Cold-test Current, EN | 210 A |
| Function | Starter Battery |
| Ampere-Hours | 11 Ah |
| Extra Description | Platinum |
| Post Positions | 21 |
| Battery Type Code | YTZ12S Compatible |
| Voltage | 12 V |
| Cold Cranking Amperage (CCA) | 210 A |
| Title | Motorcycle MF AGM Battery 12V - 11.2Ah - 140CCA |
| Width | 87 mm |
| Height | 110 mm |
| Length | 150 mm |
| Warranty | 1 year warranty |
Additional Information
- Polypropylene Case - For increased impact resistance
- Vent With Flame Arrestor - Resists high internal pressures negating internal component damage
- Lead Calcium Grid Alloy - Increased electrical performance with a longer shelf and service life
- AGM (Absorbed Glass Mat) Separator - Longer service life (increased charge and discharge compatibility) with maximum vibration resistance - A totally sealed unit that can be fitted in any orientation
- Factory Activated Product - Received in fully charged condition
Important compatibility info
| Ampere-Hours | 11 Ah |
| Post Positions | 21 |
| Cold-test Current, EN | 230 A |
| Title | Motorcycle MF AGM Battery 12V - 11Ah - 170CCA |
| Terminal Type | 7 |
| Function | Starter Battery |
| Extra Description | Platinum |
| Cold Cranking Amperage (CCA) | 230 A |
| Width | 87 mm |
| Type | Starter Battery |
| Hold-down Type | N |
| Height | 110 mm |
| Length | 151 mm |
| Terminal Layout | Positive Front Left |
| Voltage | 12 V |
| Warranty | 1 year warranty |
Additional Information
- Polypropylene Case - For increased impact resistance
- Vent With Flame Arrestor - Resists high internal pressures negating internal component damage
- Lead Calcium Grid Alloy - Increased electrical performance with a longer shelf and service life
- AGM (Absorbed Glass Mat) Separator - Longer service life (increased charge and discharge compatibility) with maximum vibration resistance - A totally sealed unit that can be fitted in any orientation
- Factory Activated Product - Received in fully charged condition
Important compatibility info
| Height | 106 mm |
| Width | 71 mm |
| Length | 114 mm |
| Terminal Type | 7 |
| Hold-down Type | N |
| Terminal Layout | Positive Front Right |
| Ampere-Hours | 6 Ah |
| Voltage | 12 V |
| Title | Motorcycle MF AGM Battery 12V - 6Ah - 100CCA |
| Battery Type Code | YTZ7S Compatible |
| Cold Cranking Amperage (CCA) | 130 A |
| Cold-test Current, EN | 130 A |
| Type | Starter Battery |
| Function | Starter Battery |
| Extra Description | Platinum |
| Warranty | 1 year warranty |
Additional Information
- Polypropylene Case - For increased impact resistance
- Vent With Flame Arrestor - Resists high internal pressures negating internal component damage
- Lead Calcium Grid Alloy - Increased electrical performance with a longer shelf and service life
- AGM (Absorbed Glass Mat) Separator - Longer service life (increased charge and discharge compatibility) with maximum vibration resistance - A totally sealed unit that can be fitted in any orientation
- Factory Activated Product - Received in fully charged condition
Important compatibility info
| Length | 351 mm |
| Width | 175 mm |
| Terminal Layout | Positive Front Right |
| Terminal Type | Standard |
| Ampere-Hours | 100 A |
| Voltage | 12 V |
| Type | EFB |
| Title | AFB/EFB Leisure Battery 12V - 100Ah |
| Height | 188 mm |
| Warranty | 2 year warranty |
Additional Information
- State Of Charge Indicator - Easy to use visual indicator to check the battery's charge and acid levels
- Low Box Model - Low Box 6110 box size available for fitment where height is an issue
- Maintenance Free - Fit & Forget - No Maintenance needed with the fully sealed range
- Up to 70 Cycles - Tested by the NCC to provide 70 complete cycles
- NCC rated Class B - Verified by the NCC the Platinum sealed range provides consumer confidence
Important compatibility info
| Width | 172 mm |
| Terminal Layout | Positive Front Left |
| Height | 222 mm |
| Voltage | 12 V |
| Ampere-Hours | 75 A |
| Type | EFB |
| Terminal Type | Standard |
| Length | 267 mm |
| Title | AFB/EFB Leisure Battery 12V - 75Ah |
| Warranty | 2 year warranty |
Additional Information
- State Of Charge Indicator - Easy to use visual indicator to check the battery's charge and acid levels
- Low Box Model - Low Box 6110 box size available for fitment where height is an issue
- Maintenance Free - Fit & Forget - No Maintenance needed with the fully sealed range
- Up to 70 Cycles - Tested by the NCC to provide 70 complete cycles
- NCC rated Class C - Verified by the NCC the Platinum sealed range provides consumer confidence
Important compatibility info
| Terminal Layout | Positive Front Right |
| Type | Starter Battery |
| Length | 351 mm |
| Height | 188 mm |
| Width | 174 mm |
| Voltage | 12 V |
| Ampere-Hours | 100 Ah |
| Title | Leisure Battery 12V - 100Ah |
| Extra Description | Platinum |
| Function | Starter Battery |
| NCC Class | C |
| Terminal Type | T1 |
| Hold-down Type | B13 |
| Warranty | 2 year warranty |
Additional Information
- State Of Charge Indicator - Easy to use visual indicator to check the battery's charge and acid levels
- Low Box Model - Low Box 6110 box size available for fitment where height is an issue
- Maintenance Free Fit & Forget - No Maintenance needed with the fully sealed range
- Up to 70 Cycles - Tested by the NCC to provide 70 complete cycles
- NCC rated Class C - Verified by the NCC the Platinum sealed range provides consumer confidence
Important compatibility info
| Width | 43 mm |
| Post Positions | 4 |
| Height | 58 mm |
| Title | Golf & Mobility VRLA Battery - 1.3Ah |
| Hold-down Type | N |
| Warranty | 1 year warranty |
| Length | 97 mm |
| Ampere-Hours | 1 Ah |
| Voltage | 12 V |
| Cycles @ 50% DOD | 500 |
| Charge Rate | 0.2 A |
| Terminal Layout | Terminals on End, Positive Right |
| Extra Description | Platinum |
| Function | Starter Battery |
| Type | Starter Battery |
| Terminal Type | F1 |
Additional Information
- Legally Compliant - Meets International Standards JIS C8702, BS6290-4 & IEC60896-21/22
- Tier 1 Manufacturing Partners - Products produced in accredited ISO9001 & ISO14001 certified facilities
- Low Self Discharge - Extended shelf life
- Recyclable Product - Environmentally friendly
- Fit In Any Position - Sealed AGM construction means the batteries can be placed in any orientation to ensure the best possible fit
- Absorbent glass material (AGM) separators & sealed construction prevents any acid spillage and provides added safety
- 500 cycles at 50% DOD - Extended service life, allowing you more power, more freedom, more fun
- Faster Recharge - Meaning less vehicle downtime
Important compatibility info
| Terminal Layout | Positive Front Left |
| Function | Starter Battery |
| Extra Description | Platinum |
| Voltage | 6 V |
| Title | Golf & Mobility VRLA Battery - 1.3Ah |
| Ampere-Hours | 1 Ah |
| Charge Rate | 0.2 A |
| Post Positions | 1 |
| Cycles @ 50% DOD | 500 |
| Height | 58 mm |
| Width | 24 mm |
| Terminal Type | F1 |
| Type | Starter Battery |
| Hold-down Type | N |
| Length | 97 mm |
| Warranty | 1 year warranty |
Additional Information
- Legally Compliant - Meets International Standards JIS C8702, BS6290-4 & IEC60896-21/22
- Tier 1 Manufacturing Partners - Products produced in accredited ISO9001 & ISO14001 certified facilities
- Low Self Discharge - Extended shelf life
- Recyclable Product - Environmentally friendly
- Fit In Any Position - Sealed AGM construction means the batteries can be placed in any orientation to ensure the best possible fit
- Absorbent glass material (AGM) separators & sealed construction prevents any acid spillage and provides added safety
- 500 cycles at 50% DOD - Extended service life, allowing you more power, more freedom, more fun
- Faster Recharge - Meaning less vehicle downtime
Important compatibility info
| Ampere-Hours | 10 Ah |
| Length | 151 mm |
| Title | Golf & Mobility VRLA Battery - 10Ah |
| Type | Starter Battery |
| Extra Description | Platinum |
| Voltage | 12 V |
| Charge Rate | 1 A |
| Terminal Type | F2 |
| Terminal Layout | Terminals on End, Positive Left |
| Function | Starter Battery |
| Width | 65 mm |
| Hold-down Type | N |
| Post Positions | 4 |
| Height | 117 mm |
| Cycles @ 50% DOD | 500 |
| Warranty | 1 year warranty |
Additional Information
- Legally Compliant - Meets International Standards JIS C8702, BS6290-4 & IEC60896-21/22
- Tier 1 Manufacturing Partners - Products produced in accredited ISO9001 & ISO14001 certified facilities
- Low Self Discharge - Extended shelf life
- Recyclable Product - Environmentally friendly
- Fit In Any Position - Sealed AGM construction means the batteries can be placed in any orientation to ensure the best possible fit
- Absorbent glass material (AGM) separators & sealed construction prevents any acid spillage and provides added safety
- 500 cycles at 50% DOD - Extended service life, allowing you more power, more freedom, more fun
- Faster Recharge - Meaning less vehicle downtime
Important compatibility info
| Extra Description | Platinum |
| Function | Starter Battery |
| Length | 328 mm |
| Charge Rate | 10 A |
| Cycles @ 50% DOD | 500 |
| Terminal Layout | Positive Front Left |
| Width | 172 mm |
| Height | 222 mm |
| Post Positions | 1 |
| Hold-down Type | N |
| Terminal Type | F12 |
| Ampere-Hours | 100 Ah |
| Voltage | 12 V |
| Title | Golf & Mobility VRLA Battery - 100Ah |
| Type | Starter Battery |
| Warranty | 1 year warranty |
Additional Information
- Legally Compliant - Meets International Standards JIS C8702, BS6290-4 & IEC60896-21/22
- Tier 1 Manufacturing Partners - Products produced in accredited ISO9001 & ISO14001 certified facilities
- Low Self Discharge - Extended shelf life
- Recyclable Product - Environmentally friendly
- Fit In Any Position - Sealed AGM construction means the batteries can be placed in any orientation to ensure the best possible fit
- Absorbent glass material (AGM) separators & sealed construction prevents any acid spillage and provides added safety
- 500 cycles at 50% DOD - Extended service life, allowing you more power, more freedom, more fun
- Faster Recharge - Meaning less vehicle downtime
Important compatibility info
| Ampere-Hours | 12 Ah |
| Function | Starter Battery |
| Type | Starter Battery |
| Cycles @ 50% DOD | 500 |
| Charge Rate | 1 A |
| Terminal Type | F2 |
| Terminal Layout | Terminals on End, Positive Left |
| Extra Description | Platinum |
| Length | 151 mm |
| Voltage | 12 V |
| Height | 101 mm |
| Width | 98 mm |
| Hold-down Type | N |
| Post Positions | 4 |
| Title | Golf & Mobility VRLA Battery - 12Ah |
| Warranty | 1 year warranty |
Additional Information
- Legally Compliant - Meets International Standards JIS C8702, BS6290-4 & IEC60896-21/22
- Tier 1 Manufacturing Partners - Products produced in accredited ISO9001 & ISO14001 certified facilities
- Low Self Discharge - Extended shelf life
- Recyclable Product - Environmentally friendly
- Fit In Any Position - Sealed AGM construction means the batteries can be placed in any orientation to ensure the best possible fit
- Absorbent glass material (AGM) separators & sealed construction prevents any acid spillage and provides added safety
- 500 cycles at 50% DOD - Extended service life, allowing you more power, more freedom, more fun
- Faster Recharge - Meaning less vehicle downtime













































