Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Rear Axle, Left, Right, Lower |
| Outer diameter | 47 mm |
| Inner diameter | 16 mm |
| Type | Mounting, control/trailing arm |
| Function | Mounting, control/trailing arm |
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Rear Axle, Left, Right, Lower |
| Outer diameter | 47 mm |
| Inner diameter | 16 mm |
| Type | Mounting, control/trailing arm |
| Function | Mounting, control/trailing arm |
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 123 mm |
| Inner diameter | 86 mm |
| Type | Rolling Bearing, suspension strut support mount |
| Function | Rolling Bearing, suspension strut support mount |
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 123 mm |
| Inner diameter | 86 mm |
| Type | Rolling Bearing, suspension strut support mount |
| Function | Rolling Bearing, suspension strut support mount |
Important compatibility info
| Opening Temperature | 92 °C |
| Diameter 2 | 35 mm |
| Diameter 1 | 54 mm |
| Additional Information | with gasket/seal |
| Height | 29.5 mm |
| Replaces | QTH207 |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
Important compatibility info
| Opening Temperature | 92 °C |
| Diameter 2 | 35 mm |
| Diameter 1 | 54 mm |
| Additional Information | with gasket/seal |
| Height | 29.5 mm |
| Replaces | QTH207 |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
Important compatibility info
| Type | Gasket Set, cylinder head cover |
| Function | Gasket Set, cylinder head cover |
Important compatibility info
| Type | Gasket Set, cylinder head cover |
| Function | Gasket Set, cylinder head cover |
Important compatibility info
| Height | 54 mm |
| Function | Air Filter |
| Filter type | Filter Insert |
| Width | 146 mm |
| Length | 257 mm |
| Type | Air Filter |
Important compatibility info
| Height | 54 mm |
| Function | Air Filter |
| Filter type | Filter Insert |
| Width | 146 mm |
| Length | 257 mm |
| Type | Air Filter |
Important compatibility info
| Length | 280 mm |
| Brake Type | Disc Brake |
| Function | Warning Contact, brake pad wear |
| Type | Warning Contact, brake pad wear |
Important compatibility info
| Length | 280 mm |
| Brake Type | Disc Brake |
| Function | Warning Contact, brake pad wear |
| Type | Warning Contact, brake pad wear |
Important compatibility info
| Width | 40 mm |
| Diameter | 230 mm |
| Brake Type | Drum Brake |
| Manufacturer Restriction | VAG |
| Function | Accessory Kit, brake shoes |
| Type | Accessory Kit, brake shoes |
Important compatibility info
| Width | 40 mm |
| Diameter | 230 mm |
| Brake Type | Drum Brake |
| Manufacturer Restriction | VAG |
| Function | Accessory Kit, brake shoes |
| Type | Accessory Kit, brake shoes |
Important compatibility info
| Valve stem material | Chrome-silicon-steel |
| Length | 108.9 mm |
| Material | Bi-metal, Chrome-Mangan-Nickel Steel |
| Valve seat angle | 45 ° |
| Valve stem diameter | 5.5 mm |
| Valve head diameter | 29 mm |
| Additional Information 2 | Valve stem tip hardened |
| Engine Valve Type | Exhaust Valve |
| Function | Exhaust Valve |
| Type | Exhaust Valve |
Important compatibility info
| Valve stem material | Chrome-silicon-steel |
| Length | 108.9 mm |
| Material | Bi-metal, Chrome-Mangan-Nickel Steel |
| Valve seat angle | 45 ° |
| Valve stem diameter | 5.5 mm |
| Valve head diameter | 29 mm |
| Additional Information 2 | Valve stem tip hardened |
| Engine Valve Type | Exhaust Valve |
| Function | Exhaust Valve |
| Type | Exhaust Valve |
Important compatibility info
| Function | Ball Joint |
| Steering arm type | for control arm |
| Thread Size | M12x1.2 |
| Type | Ball Joint |
| Placement on Vehicle | Upper, Front Axle Left, Front Axle Right |
| Manufacturer | DAIMLER JAGUAR |
| Mounting Type | Bolted |
| Number of mounting bores | 2 |
| Paired article numbers | AST0259 |
Important compatibility info
| Function | Ball Joint |
| Steering arm type | for control arm |
| Thread Size | M12x1.2 |
| Type | Ball Joint |
| Placement on Vehicle | Upper, Front Axle Left, Front Axle Right |
| Manufacturer | DAIMLER JAGUAR |
| Mounting Type | Bolted |
| Number of mounting bores | 2 |
| Paired article numbers | AST0259 |
Important compatibility info
| Function | Tie Rod End |
| Type | Tie Rod End |
| Placement on Vehicle | Front Axle Left |
| Thread Size | M12x1.25 |
| Manufacturer | NISSAN |
| Model | MICRA |
| Paired article numbers | AST6897 |
Important compatibility info
| Function | Tie Rod End |
| Type | Tie Rod End |
| Placement on Vehicle | Front Axle Left |
| Thread Size | M12x1.25 |
| Manufacturer | NISSAN |
| Model | MICRA |
| Paired article numbers | AST6897 |
Important compatibility info
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
| Length 2 | 896 mm |
| Length 1 | 1560 mm |
| Placement on Vehicle | Left Rear, Right Rear |
| Model | TOURAN |
| Manufacturer | VOLKSWAGEN |
Important compatibility info
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
| Length 2 | 896 mm |
| Length 1 | 1560 mm |
| Placement on Vehicle | Left Rear, Right Rear |
| Model | TOURAN |
| Manufacturer | VOLKSWAGEN |
Important compatibility info
| Outer diameter | 84.5 mm |
| Filter type | In-Line Filter |
| Height | 205 mm |
| Function | Fuel filter |
| Diameter 1/ Diameter 2 | IN :9,5/OUT :8 mm |
| Type | Fuel filter |
| for OE number | 51929061 |
Important compatibility info
| Outer diameter | 84.5 mm |
| Filter type | In-Line Filter |
| Height | 205 mm |
| Function | Fuel filter |
| Diameter 1/ Diameter 2 | IN :9,5/OUT :8 mm |
| Type | Fuel filter |
| for OE number | 51929061 |
Important compatibility info
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
| for OE number | 52127324 |
Important compatibility info
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
| for OE number | 52127324 |
Important compatibility info
| Length | 1000 mm |
| Width | 13 mm |
| Function | V-Belt |
| Type | V-Belt |
| Replaces | ADN19619; ADT39625 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 1000 mm |
| Width | 13 mm |
| Function | V-Belt |
| Type | V-Belt |
| Replaces | ADN19619; ADT39625 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thickness/Strength 1 | 13 mm |
| Width | 37 mm |
| Length | 89 mm |
| Placement on Vehicle | Rear Axle |
| Inspection Tag | ECE R90 Approved |
| Function | Brake Pad Set, disc brake |
| Wear Warning Contact | with acoustic wear warning |
| Type | Brake Pad Set, disc brake |
| Replaces | ADH24219 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thickness/Strength 1 | 13 mm |
| Width | 37 mm |
| Length | 89 mm |
| Placement on Vehicle | Rear Axle |
| Inspection Tag | ECE R90 Approved |
| Function | Brake Pad Set, disc brake |
| Wear Warning Contact | with acoustic wear warning |
| Type | Brake Pad Set, disc brake |
| Replaces | ADH24219 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M12 x 1,25 |
| Internal Thread Size | M14 x 1,5 |
| Length | 190 mm |
| Placement on Vehicle | Front Axle Left |
| Spanner Size | 17 |
| Paired article numbers | ADK88752 |
| Function | Tie Rod End |
| Type | Tie Rod End |
| Additional Information | with crown nut and split pin |
Additional Information
Technical Information
If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M12 x 1,25 |
| Internal Thread Size | M14 x 1,5 |
| Length | 190 mm |
| Placement on Vehicle | Front Axle Left |
| Spanner Size | 17 |
| Paired article numbers | ADK88752 |
| Function | Tie Rod End |
| Type | Tie Rod End |
| Additional Information | with crown nut and split pin |
Additional Information
Technical Information
If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Internal Thread Size | M14 x 1,5 |
| Length | 190 mm |
| Placement on Vehicle | Front Axle Right |
| Additional Information | with crown nut and split pin |
| Spanner Size | 17 |
| Paired article numbers | ADK88751 |
| Function | Tie Rod End |
| External Thread Size | M12 x 1,25 |
| Type | Tie Rod End |
Additional Information
Technical Information
If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Internal Thread Size | M14 x 1,5 |
| Length | 190 mm |
| Placement on Vehicle | Front Axle Right |
| Additional Information | with crown nut and split pin |
| Spanner Size | 17 |
| Paired article numbers | ADK88751 |
| Function | Tie Rod End |
| External Thread Size | M12 x 1,25 |
| Type | Tie Rod End |
Additional Information
Technical Information
If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 232 mm |
| Height | 47 mm |
| Width | 154 mm |
| Filter type | Filter Insert |
| Function | Air Filter |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 232 mm |
| Height | 47 mm |
| Width | 154 mm |
| Filter type | Filter Insert |
| Function | Air Filter |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Mounting Kit, exhaust pipe |
| Function | Mounting Kit, exhaust pipe |
| To be used with part number(s) | BM70619 |
| Placement on Vehicle | Front |
Important compatibility info
| Type | Mounting Kit, exhaust pipe |
| Function | Mounting Kit, exhaust pipe |
| To be used with part number(s) | BM70619 |
| Placement on Vehicle | Front |
Important compatibility info
| Function | Mounting Kit, catalytic converter |
| Type | Mounting Kit, catalytic converter |
| To be used with part number(s) | BM80051, BM80051H |
Additional Information
- 1x BM Catalysts Mounting Kit, catalytic converter (FK80051A)
- 1x BM Catalysts Mounting Kit, catalytic converter (FK80051B)
- 1x BM Catalysts Mounting Kit, catalytic converter (FK80051C)
Important compatibility info
| Function | Mounting Kit, catalytic converter |
| Type | Mounting Kit, catalytic converter |
| To be used with part number(s) | BM80051, BM80051H |
Additional Information
- 1x BM Catalysts Mounting Kit, catalytic converter (FK80051A)
- 1x BM Catalysts Mounting Kit, catalytic converter (FK80051B)
- 1x BM Catalysts Mounting Kit, catalytic converter (FK80051C)
Important compatibility info
| Length | 360 mm |
| Function | Brake Hose |
| Thread Size | M10x1 |
| Type | Brake Hose |
| Placement on Vehicle | Rear Axle, Left, inner |
| Thread Type | with internal thread |
Important compatibility info
| Length | 360 mm |
| Function | Brake Hose |
| Thread Size | M10x1 |
| Type | Brake Hose |
| Placement on Vehicle | Rear Axle, Left, inner |
| Thread Type | with internal thread |
Important compatibility info
| Length | 360 mm |
| Function | Brake Hose |
| Thread Size | M10x1 |
| Type | Brake Hose |
| Thread Type | with internal thread |
| Placement on Vehicle | Rear Axle, Right, inner |
Important compatibility info
| Length | 360 mm |
| Function | Brake Hose |
| Thread Size | M10x1 |
| Type | Brake Hose |
| Thread Type | with internal thread |
| Placement on Vehicle | Rear Axle, Right, inner |
Important compatibility info
| Placement on Vehicle | Front Axle |
| Function | Accessory Kit, disc brake pad |
| Type | Accessory Kit, disc brake pad |
Important compatibility info
| Placement on Vehicle | Front Axle |
| Function | Accessory Kit, disc brake pad |
| Type | Accessory Kit, disc brake pad |
Important compatibility info
| Function | Accessory Kit, disc brake pad |
| Placement on Vehicle | Front Axle |
| Type | Accessory Kit, disc brake pad |
Important compatibility info
| Function | Accessory Kit, disc brake pad |
| Placement on Vehicle | Front Axle |
| Type | Accessory Kit, disc brake pad |
Important compatibility info
| Function | Bellow Kit, drive shaft |
| Lubrication | with grease lubrication |
| Inner diameter 2 | 96 mm |
| Inner diameter 1 | 27 mm |
| Length | 128 mm |
| Type | Bellow Kit, drive shaft |
| Additional Information 2 | with clamps |
| Placement on Vehicle | Front Axle Left, Front Axle Right, transmission sided |
Important compatibility info
| Function | Bellow Kit, drive shaft |
| Lubrication | with grease lubrication |
| Inner diameter 2 | 96 mm |
| Inner diameter 1 | 27 mm |
| Length | 128 mm |
| Type | Bellow Kit, drive shaft |
| Additional Information 2 | with clamps |
| Placement on Vehicle | Front Axle Left, Front Axle Right, transmission sided |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023
























