Proud to be a UK-based company
Contact us
Important compatibility info
| Additional Information | with counter nut |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 140 mm |
| Function | Inner Tie Rod |
| External Thread Size | M14 x 1,5, M18 x 1,5 |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
| for OE number | 53010-SDA-A01 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.53
Important compatibility info
| Function | Repair Kit, stabiliser coupling rod |
| Type | Repair Kit, stabiliser coupling rod |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Fastening Bolt, stabiliser bar (06063)
- 1x Febi Joint Bearing, connector rod (06066)
- 2x Febi Seal Ring (06069)
- 2x Febi Sleeve, stabiliser mounting (06064)
- 1x Febi Washer (06067)
- 1x Febi Washer (06068)
- 1x Febi Nut (01563)
- 1x Febi Grease Nipple (01096)
- 2x Febi Circlip (06065)
£16.53
Important compatibility info
| Filter type | In-Line Filter |
| Function | Fuel filter |
| Internal Thread Size | M12 x 1,5, M14 x 1,5 |
| Outer diameter | 82 mm |
| Length | 152 mm |
| Type | Fuel filter |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.53
Important compatibility info
| Placement on Vehicle | Right |
| Material | NBR (nitrile butadiene rubber) |
| Function | Gasket, cylinder head cover |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.53
Important compatibility info
| Height | 100 mm |
| Outer diameter | 74 mm |
| Inner diameter | 18 mm |
| Filter type | Filter Insert |
| Type | Fuel filter |
| Function | Fuel filter |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.53
Important compatibility info
| Placement on Vehicle | Lower Front Axle |
| Outer diameter | 70 mm. 50 mm |
| Thickness | 48 mm |
| Inner diameter | 20 mm |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.54
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 355 mm |
| Function | Inner Tie Rod |
| Additional Information | with counter nut |
| External Thread Size | M14 x 1,5 |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.54
Important compatibility info
| Outer diameter | 60 mm |
| Function | Tensioner Pulley, timing belt |
| Width of castor bearing surface | 32.5 mm |
| Type | Tensioner Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.54
Important compatibility info
| Length | 24 mm |
| Width | 15 mm |
| Thickness | 80 mm |
| Number of Connectors / Ports | 2 |
| Function | Sensor, interior temperature |
| Type | Sensor, interior temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.54
Important compatibility info
| Placement on Vehicle | Rear Axle, Front |
| Thickness | 80 mm |
| Inner diameter | 17 mm |
| Outer diameter 1 | 24 mm |
| Outer diameter 2 | 52 mm |
| Function | Bushing, leaf spring |
| Type | Bushing, leaf spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.54
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 276 mm |
| Function | Inner Tie Rod |
| Additional Information | with counter nut |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
| External Thread Size | M18 x 1,5, M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.54
Important compatibility info
| Material | Rubber/Metal |
| Thickness | 90 mm |
| Function | Bushing, axle beam |
| Type | Bushing, axle beam |
| Placement on Vehicle | Rear Axle Left, Front, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.54
Important compatibility info
| Length | 118 mm |
| Outer diameter | 50 mm |
| Filter type | In-Line Filter |
| Pipe Diameter | 8 mm |
| Type | Fuel Filter |
| Function | Fuel Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.54
Important compatibility info
| Function | Inner Tie Rod |
| Length | 234 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Additional Information | with counter nut |
| External Thread Size | M14 x 1,5 |
| Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.54
Important compatibility info
| External Thread Size | M12 x 1,25 |
| Placement on Vehicle | Front Axle Left, Outer, Front Axle Right |
| Function | Tie Rod End |
| Type | Tie Rod End |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.54
Important compatibility info
| Function | V-Ribbed Belt |
| Number of Ribs | 5 |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Length | 1745 mm |
| DIN / ISO | 7867 |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.54
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Function | Wheel Bolt |
| Wheel Fastening | Ball seat A/G |
| Thread Length | 27 mm |
| Surface | Chromed |
| Spanner Size | 17, 19 |
| Length | 53.5 mm |
| Placement on Vehicle | Front Axle, Rear Axle |
| Screw length below head | 29 mm |
| Outer diameter | 23.7 mm |
| Material | Steel |
| Quality/ Grade | 8.8 |
| Type | Wheel Bolt |
| Lockable | Lockable |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.55
Important compatibility info
| Height | 149 mm |
| Outer diameter | 75 mm |
| Filter type | Filter Insert |
| Type | Oil Filter |
| Function | Oil Filter |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.55
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | 22846 |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.56
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 508 mm |
| Housing Diameter | 18 mm |
| Eject Force | 620 N |
| Stroke | 180 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 297.5 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.56
Important compatibility info
| External Thread Size | M12 x 1,25 |
| Spanner Size | 19 |
| Placement on Vehicle | Front Axle Right |
| Length | 79 mm |
| Material | Steel |
| Paired article numbers | 27985 |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Additional Information | with lock nut |
| Thread Length | 24.8 mm |
| Pipe Diameter | 9 mm |
| Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.56
Important compatibility info
| Placement on Vehicle | Lower Front Axle, Rear, Front |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Mounting, control/trailing arm (17781)
- 4x Febi Mounting, control/trailing arm (19009)
£16.56
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 78.7 mm |
| Width | 63.5 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 13.4 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.56
Important compatibility info
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
| Shape/Form | slotted |
| Paired article numbers | 173174 |
| Inner diameter | 14.5 mm |
| Thickness | 44 mm |
| Material | Rubber/Metal |
| Outer diameter | 37.8 mm |
| Placement on Vehicle | Rear Axle Left, Upper, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.56
Important compatibility info
| Placement on Vehicle | Lower, Rear Axle Left, Rear Axle Right |
| Material | Rubber/Metal |
| Outer diameter | 42.3 mm |
| Thickness | 44 mm |
| Inner diameter | 14.6 mm |
| Paired article numbers | 173171 |
| Shape/Form | slotted |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.56
Important compatibility info
| Placement on Vehicle | Rear |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, automatic transmission |
| Type | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.57
Important compatibility info
| Internal Thread Size | M14 x 2 |
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | 12747 |
| Thread Type | with right-hand thread |
| Function | Tie Rod End |
| External Thread Size | M12 x 1,75 |
| Additional Information | with lock nut |
| Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.57
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Cone Size | 17.5 mm |
| Function | Ball Joint |
| External Thread Size | M14 x 1,5 |
| Mounting points diameter | 13 mm |
| Extra Description | ProKit |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.57
Important compatibility info
| Length | 306 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Additional Information | with counter nut |
| Internal Thread Size | M16 x 1,5 |
| External Thread Size | M16 x 1,5 |
| Function | Inner Tie Rod |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.57
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 131.4 mm |
| Width | 54.7 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 14.8 mm |
| Function | Brake Pad Set, disc brake |
| Model | CITY CIVIC JAZZ LOGO |
| Manufacturer | HONDA |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.57
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 405 mm |
| Housing Diameter | 18 mm |
| Eject Force | 270 N |
| Stroke | 162 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, bonnet |
| Colour | black |
| Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.57
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 37 mm |
| Outer diameter | 72 mm |
| Inner diameter | 39 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information | with Split Pin, with retaining rings |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (03271)
- 1x Febi Split Pin (02877)
- 2x Febi Circlip (04853)
£16.57
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 106 mm |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information 2 | with bolts/screws |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Link/Coupling Rod, stabiliser bar (28579)
- 2x Febi Screw (36664)
- 2x Febi Nut, stabiliser bar (30155)
- 2x Febi Fastening Bolt, stabiliser bar (171185)
£16.58
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 588 mm |
| Housing Diameter | 19 mm |
| Eject Force | 675 N |
| Stroke | 198 mm |
| Mounting points diameter | 17.8 mm |
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, boot/cargo area |
| Function | Gas Spring, boot/cargo area |
| Housing length | 357.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.58
Important compatibility info
| Outer diameter | 80 mm |
| Function | Cap, fuel tank |
| Additional Information | with chain |
| Type | Cap, fuel tank |
| Lock System | without lock |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.58
Important compatibility info
| Placement on Vehicle | Front Axle, Rear Axle |
| Bearing Type | Tapered Roller Bearing |
| Inner diameter | 40 mm |
| Width | 32 mm |
| Outer diameter | 80 mm |
| Type | Bearing / Wheel Bearing |
| Function | Bearing / Wheel Bearing |
| Bearing Code | 33208 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.58
Important compatibility info
| Length | 47 mm |
| Spanner Size | 22 |
| Opening Pressure | 1.85 bar |
| Function | Breather Screw/Valve, radiator |
| External Thread Size | M21 x 1,5 |
| Type | Breather Screw/Valve, radiator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.58
Important compatibility info
| Height | 8 mm |
| Material | FPM (fluoride rubber) |
| Placement on Vehicle | transmission sided |
| Rotation Direction | Anticlockwise rotation |
| Function | Shaft Seal, crankshaft |
| Outer diameter | 108 mm |
| Inner diameter | 76 mm |
| Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.58
Important compatibility info
| Material | Plastic |
| Outer diameter | 60 mm |
| Inner diameter | 10 mm |
| Mounting points diameter | 10 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Width of castor bearing surface | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.58
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Material | FPM (fluoride rubber) |
| Outer diameter | 160.3 mm |
| Thickness | 10 mm |
| Inner diameter | 130.2 mm |
| Function | Shaft Seal, wheel hub |
| Type | Shaft Seal, wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.58
Important compatibility info
| Material | Rubber/Metal |
| Function | Flange, carburettor |
| Type | Flange, carburettor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.58
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 585 mm |
| Type | Brake Hose |
| Function | Brake Hose |
| Internal Thread Size | M10 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.58
Important compatibility info
| Placement on Vehicle | Front Axle |
| Function | Guide Sleeve Kit, brake caliper |
| Type | Guide Sleeve Kit, brake caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.59
Important compatibility info
| Function | Sensor, coolant level |
| Number of Connectors / Ports | 2 |
| Type | Sensor, coolant level |
| Housing Colour | Black |
| for OE number | 210 545 00 24 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.59
Important compatibility info
| Length | 1900 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Function | V-Ribbed Belt |
| Number of Ribs | 6 |
| Type | V-Ribbed Belt |
| Replaces | 28990 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.59
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 133 mm |
| Width | 55 mm |
| Material | Rubber |
| Type | Rubber Buffer, suspension |
| Function | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.59
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 243 mm |
| Additional Information | with counter nut |
| Outer diameter | 40 mm |
| Spanner Size | 36, 15 |
| Type | Inner Tie Rod |
| Function | Inner Tie Rod |
| External Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.59
Important compatibility info
| Material | ACM (Polyacrylate) |
| Thickness | 1.5 mm |
| Type | Gasket, oil cooler |
| Function | Gasket, oil cooler |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.59
Important compatibility info
| Outer diameter | 65 mm. 28 mm |
| Thickness | 63 mm |
| Inner diameter | 14 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.60
Important compatibility info
| Paired article numbers | 108812 |
| Function | Tie Rod End |
| Placement on Vehicle | Front Axle Right |
| Internal Thread Size | M16 x 1,5 |
| External Thread Size | M14 x 1,5 |
| Length | 210 mm |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.60
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023