Important compatibility info
| Placement on Vehicle | Front Axle |
| Function | Guide Sleeve Kit, brake caliper |
| Type | Guide Sleeve Kit, brake caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Wheel Brake Cylinder |
| Piston Diameter | 20.6 mm |
| Function | Wheel Brake Cylinder |
| Paired article numbers | 09616 |
| Placement on Vehicle | Rear Axle Left |
| Material | Cast Iron |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Mounting, stabiliser bar |
| Material | Rubber |
| Placement on Vehicle | Front Axle |
| Inner diameter | 22 mm |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 107 mm |
| Rod/Strut | Coupling Rod |
| Material | Steel |
| Additional Information 2 | with washers |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M12 x 1,75, M10 x 1,5 |
| Extra Description | ProKit |
| Thread Length | 29.7 mm |
| Pipe Diameter | 10 mm |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with rubber mounts, with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | transmission sided, Front Axle |
| Length | 82 mm |
| Material | Thermoplast |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
| Inner diameter 1 | 28 mm |
| Inner diameter 2 | 64 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (172867)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
| Steering arm type | for control arm |
| Additional Information 2 | with crown nut |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| External Thread Size | M12 x 1,25 |
| Type | Ball Joint |
| Function | Ball Joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 200 mm |
| Width | 52 mm |
| Thickness | 80 mm |
| Type | Stop- /Mounting Buffer |
| Function | Stop- /Mounting Buffer |
| Hole Spacing | 121 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Internal Thread Size | M10 x 1 |
| Type | Brake Hose |
| Function | Brake Hose |
| Length | 265 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inner diameter | 14 mm |
| Surface | Coated |
| Number of Connectors / Ports | 2 |
| Type | Pressure Hose, air compressor |
| Function | Pressure Hose, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Steel |
| Diameter | 1 mm |
| Additional Information | with nuts |
| Placement on Vehicle | Front Axle Right |
| Length | 317 mm |
| Thread Length | 25 mm |
| Spanner Size | 15 |
| Paired article numbers | 184964 |
| Rod/Strut | Coupling Rod |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M10 x 1,5 |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Upper, Rear Axle Left, Front, Rear Axle Right |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Rod/Strut | Pull Rod |
| Function | Control/Trailing Arm, wheel suspension |
| Width | 75 mm |
| Height | 40 mm |
| Length | 245 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber-metal mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Extra Description | ProKit |
| Function | Ball Joint |
| Type | Ball Joint |
| Additional Information 2 | with crown nut |
| Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Height | 45 mm |
| Material | Rubber/Metal |
| Outer diameter | 115 mm |
| Type | Suspension Strut Support Mount |
| Function | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
| Inner diameter | 13 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 57 mm |
| Placement on Vehicle | Front, Front Axle Left, Front Axle Right |
| Material | Rubber/Metal |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
| Inner diameter | 14.3 mm |
| Thickness | 68 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Brake Hose |
| External Thread Size | M10 x 1 |
| Length | 206 mm |
| Paired article numbers | 186352 |
| Type | Brake Hose |
| Placement on Vehicle | Rear Axle Right, outer |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | frontal sided |
| Width | 10 mm |
| Material | PTFE (polytetrafluoroethylene), ACM (Polyacrylate) |
| Outer diameter | 60 mm |
| Inner diameter | 44 mm |
| Function | Shaft Seal, crankshaft |
| Additional Information 2 | with mounting sleeve |
| Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 300 mm |
| Placement on Vehicle | both sides |
| Width | 300 mm |
| Type | Mudflap |
| Function | Mudflap |
| Replaces | 03086 |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 202 mm |
| Height | 20 mm |
| Filter type | Activated Carbon Filter |
| Type | Filter, cabin air |
| Function | Filter, cabin air |
| Width | 190 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Replaced by | 48369 |
| Function | Hydraulic Filter, automatic transmission |
| Type | Hydraulic Filter, automatic transmission |
| Filter type | Screen Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M20 x 1,5, M30 x 1,5 RHT |
| Pipe Diameter | 35 mm |
| Quality/ Grade | 10.9 |
| Cone Size | 26 mm |
| Thread Length | 80 mm |
| Colour | Grey |
| Paired article numbers | 02546 |
| Spanner Size | 30 |
| Outer diameter | 60 mm. 23.5 mm |
| Material | Steel |
| Length | 115 mm |
| Placement on Vehicle | Front Axle |
| Thread Type | with right-hand thread |
| Extra Description | ProKit |
| Additional Information 2 | with crown nut |
| Type | Angled Ball Joint, steering push rod / Tie Rod End |
| Function | Angled Ball Joint, steering push rod / Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | PU (Polyurethane), Rubber |
| Placement on Vehicle | Front Axle |
| Function | Dust Cover Kit, shock absorber |
| Type | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (12477)
- 2x Febi Protective Cap/Bellow, shock absorber (17148)
Important compatibility info
| Spanner Size | 27 |
| Control Type | Push Actuation |
| Length | 35 mm. 44 mm |
| Material | Brass |
| External Thread Size | M18 x 1,5, M27 x 1 |
| Type | Control Switch / Switch, 'driver cab tilted' display |
| Function | Control Switch / Switch, 'driver cab tilted' display |
| Replaces | 09963 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 80 mm |
| Function | Cap, fuel tank |
| Additional Information | with chain |
| Type | Cap, fuel tank |
| Lock System | without lock |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with counter nut |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 323.5 mm |
| Function | Inner Tie Rod |
| External Thread Size | M18 x 1,5, M15 x 1,5 |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage to | 24 V |
| Voltage from | 12 V |
| Height | 45 mm |
| Fulfils ECE norm | R10, R3, R91 |
| Light Design | LED |
| Cable Length | 500 mm |
| Type | Side Marker Light |
| Protection Type (IP Code) | IP67 |
| Width | 102 mm |
| Inspection Tag | EMC |
| Colour | Orange |
| Depth | 14 mm |
| Port / Connector type | PRS |
| Mounting bores distance | 84 mm |
| Function | Side Marker Light |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Gasket inner diameter | 91 mm |
| Gasket outer diameter | 99.2 mm |
| Type | Oil Filter |
| Function | Oil Filter |
| Height | 93 mm |
| Outer diameter | 83 mm |
| Additional Information 2 | with seal ring |
| Inner diameter | 27 mm |
| Filter type | Filter Insert |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Paired article numbers | 184154 |
| External Thread Size | M12 x 1,5 |
| Type | Tie Rod End |
| Function | Tie Rod End |
| Placement on Vehicle | Front Axle Left |
| Length | 94 mm |
| Spanner Size | 23 |
| Additional Information | with nuts |
| Internal Thread Size | M16 x 1,5 |
Additional Information
Technical Information
After replacement, the optical driver assistance systems (cameras, radar, etc.) may need to be recalibrated. Please observe the manufacturer's instructions.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 94 mm |
| Spanner Size | 23 |
| Paired article numbers | 184153 |
| Type | Tie Rod End |
| Function | Tie Rod End |
| External Thread Size | M12 x 1,5 |
| Internal Thread Size | M16 x 1,5 |
| Additional Information | with lock nut |
Additional Information
Technical Information
After replacement, the optical driver assistance systems (cameras, radar, etc.) may need to be recalibrated. Please observe the manufacturer's instructions.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Teeth | 19 |
| Outer diameter | 56 mm |
| for OE number | 13 02 112 10R |
| Type | Sprocket, crankshaft |
| Function | Sprocket, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 115 mm |
| Material | Steel |
| Outer diameter | 23.5 mm. 60 mm |
| Thickness | 107 mm |
| Spanner Size | 30 |
| Paired article numbers | 02545 |
| Colour | Grey |
| Thread Length | 91 mm |
| Thread Type | with left-hand thread |
| Cone Size | 26 mm |
| Quality/ Grade | 10.9 |
| Pipe Diameter | 35 mm |
| External Thread Size | M20 x 1,5, M30 x 1,5 LHT |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Replaces | 08793 |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Lower Front Axle |
| Outer diameter | 70 mm. 50 mm |
| Thickness | 48 mm |
| Inner diameter | 20 mm |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Additional Information | with counter nut |
| Length | 344 mm |
| Function | Inner Tie Rod |
| External Thread Size | M14 x 1,5, M12 x 1,25 |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 17 mm |
| Outer diameter | 59 mm. 45 mm |
| Inner diameter | 32 mm. 19 mm |
| Bearing Type | Tapered Roller Bearing |
| Function | Wheel Bearing Kit |
| Additional Information | with fastening/mounting material |
| Type | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Shaft Seal, wheel bearing (04941)
- 1x Febi Screw (04946)
- 1x Febi Cap, wheel bearing (04947)
- 1x Febi Tab Washer, axle nut (08952)
Important compatibility info
| Gasket inner diameter | 81 mm |
| Filter type | Main Stream Filtration, Filter Insert |
| Height | 82 mm |
| Additional Information 2 | with seal ring |
| Outer diameter | 83 mm |
| Inner diameter | 21 mm |
| Function | Fuel filter |
| Gasket outer diameter | 88.2 mm |
| Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Wear Warning Contact | incl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 17 mm |
| Function | Brake Pad Set, disc brake |
| Manufacturer | FIAT FORD |
| Type | Brake Pad Set, disc brake |
| Length | 115 mm |
| Width | 55.4 mm |
| Model | 500 CINQUECENTO KA PANDA PUNTO SEICENTO |
| Replaces | 16754 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Cooling Hose | from radiator to water pipe |
| Function | Radiator Hose |
| Additional Information | with quick coupling |
| Type | Radiator Hose |
| for OE number | 8D0 121 101 K |
| Placement on Vehicle | Upper Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M12 x 1,5 |
| Length | 50 mm |
| Material | Brass |
| Spanner Size | 19 |
| Colour | Black |
| Number of Connectors / Ports | 2 |
| Type | Sensor, intake air temperature |
| Function | Sensor, intake air temperature |
| Screw length below head | 24 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 109 mm |
| Inner diameter | 81 mm |
| Function | Mounting, stabiliser bar |
| Placement on Vehicle | Rear Axle |
| Length | 67 mm |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle |
| Length | 125 mm |
| Material | Thermoplast |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
| Inner diameter 1 | 31 mm |
| Inner diameter 2 | 104 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (100421)
- 1x Febi Clamping Clip (29820)
- 1x Febi Clamping Clip (45647)
- 2x Febi High Temperature Lubricant (03630)
Important compatibility info
| Number of Ribs | 10 |
| Function | V-Ribbed Belt |
| Length | 1425 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M16 x 2 |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Placement on Vehicle | Upper, Front Axle Left, Front Axle Right |
| Function | Ball Joint |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 142.5 mm |
| Valve stem diameter | 8 mm |
| Valve head diameter | 38 mm |
| Notches / Holes Number | 1 |
| Type | Exhaust Valve |
| Function | Exhaust Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Plastic |
| Number of Connectors / Ports | 2 |
| Pump Type | Mono Pump |
| Voltage | 12 V |
| Function | Washer Fluid Pump, headlight cleaning |
| Type | Washer Fluid Pump, headlight cleaning |
| Replaces | 103611; 26235 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M12 x 1,5 |
| Placement on Vehicle | Front Axle Left, Lower |
| Paired article numbers | 40540 |
| Function | Ball Joint |
| Additional Information | with nuts |
| Type | Ball Joint |
| Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ball Joint (40276)
- 3x Febi Nut, ball joint (36734)
Important compatibility info
| External Thread Size | M12 x 1,5 |
| Placement on Vehicle | Front Axle Right, Lower |
| Paired article numbers | 40539 |
| Function | Ball Joint |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ball Joint (40277)
- 3x Febi Nut, ball joint (36734)
Important compatibility info
| Mounting bores distance | 116 mm |
| Width | 130 mm |
| Height | 32 mm |
| Voltage to | 24 V |
| Type | End Outline Marker Light |
| Voltage from | 12 V |
| Depth | 14 mm |
| Cable Length | 500 mm |
| Colour | White |
| Inspection Tag | EMC |
| Protection Type (IP Code) | IP67 |
| Function | End Outline Marker Light |
| Light Design | LED |
| Fulfils ECE norm | R10, R7, R3 |
| Port / Connector type | PRS |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Paired article numbers | 29675 |
| Placement on Vehicle | Front Axle Right |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Internal Thread Size | M16 x 1,5 |
| External Thread Size | M14 x 1,5 |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 22 mm |
| Number of Teeth | 124 |
| Belts | with trapezoidal tooth profile |
| Type | Timing Belt |
| Function | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left Rear, Right Rear |
| Length | 943 mm |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023
















































