Proud to be a UK-based company
Contact us
Important compatibility info
| Length | 69 mm |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
| Inner diameter | 39.4 mm |
| Thickness | 68 mm |
| Material | Rubber |
| Width | 68 mm |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.95
Important compatibility info
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.95
Important compatibility info
| Voltage | 24 V |
| Valve type | Shut-Off Valve |
| Function | Valve, injection system |
| Type | Valve, injection system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.96
Important compatibility info
| Additional Information | with grease |
| Additional Information 2 | with bolts/screws, with clamps |
| Placement on Vehicle | Rear Axle, transmission sided |
| Material | Rubber |
| Inner diameter 1 | 25 mm |
| Inner diameter 2 | 63 mm |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
| Length | 99 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (08405)
- 1x Febi Fastening Clamp (08406)
- 1x Febi Fastening Clamp (08408)
- 6x Febi Bolt, drive shaft flange (02592)
- 2x Febi Packing Plate, drive shaft flange (02593)
- 1x Febi Circlip (02596)
- 1x Febi Molybdenum Grease (02582)
£17.96
Important compatibility info
| Width | 23.4 mm |
| Number of Teeth | 95 |
| Belts | with rounded tooth profile |
| Function | Timing Belt |
| Type | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.96
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 537 mm |
| Housing Diameter | 19 mm |
| Eject Force | 585 N |
| Stroke | 208 mm |
| Mounting points diameter | 17.8 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 289 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.96
Important compatibility info
| Hole Spacing | 470 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Inner diameter | 14 mm |
| Paired article numbers | 36396 |
| Rod/Strut | Guide Rod |
| Function | Rod/Strut, wheel suspension |
| Type | Rod/Strut, wheel suspension |
| Additional Information 2 | with rubber mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.96
Important compatibility info
| Length | 1725 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Function | V-Ribbed Belt |
| Number of Ribs | 9 |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.96
Important compatibility info
| Length | 2403 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 6 |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.96
Important compatibility info
| Function | Air Filter |
| Filter type | Filter Insert |
| Length | 187 mm |
| Type | Air Filter |
| Inner diameter | 91 mm |
| Outer diameter | 158 mm |
| Additional Information 2 | with pre-filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.96
Important compatibility info
| Function | Suspension Spring |
| Type | Suspension Spring |
| Placement on Vehicle | Rear Axle |
| Length | 334 mm |
| Outer diameter | 124 mm |
| Wire Diameter | 10 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.96
Important compatibility info
| Material | Plastic |
| Outer diameter | 60 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Width of castor bearing surface | 25 mm |
| Inner diameter | 10 mm |
| Mounting points diameter | 10 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.97
Important compatibility info
| Length | 203 mm |
| Function | Inner Tie Rod |
| Additional Information | with counter nut |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| External Thread Size | M14 x 1,5, M16 x 1,5 |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.97
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Lower, Rear Axle Right, Rear, inner |
| Material | Rubber/Metal |
| Outer diameter | 59 mm |
| Function | Mounting, control/trailing arm |
| Shape/Form | slotted |
| Inner diameter | 14 mm |
| Thickness | 65 mm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.97
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 281 mm |
| Width | 55 mm |
| Material | PU (Polyurethane), Thermoplast |
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Protective Cap/Bellow, shock absorber (108768)
- 2x Febi Rubber Buffer, suspension (170455)
£17.97
Important compatibility info
| Number of Ribs | 7 |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Type | V-Ribbed Belt |
| Length | 1792 mm |
| Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.97
Important compatibility info
| Paired article numbers | 108902 |
| Inner diameter | 12 mm |
| Material | Steel |
| Length | 328 mm |
| Placement on Vehicle | Front Axle Right |
| Function | Link/Coupling Rod, stabiliser bar |
| Rod/Strut | Coupling Rod |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M12 x 1,5 |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.97
Important compatibility info
| Operating Mode | Electric |
| Number of Connectors / Ports | 2 |
| Function | Stop Light Switch |
| Type | Stop Light Switch |
| Additional Information | with pressure plate |
| Housing Colour | black |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.97
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 328 mm |
| Inner diameter | 12 mm |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M12 x 1,5 |
| Paired article numbers | 108901 |
| Material | Steel |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.97
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle Left |
| Length | 193 mm |
| Paired article numbers | 106747 |
| Function | Tie Rod End |
| Additional Information | with lock nut |
| Internal Thread Size | M16 x 1,5 |
| Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.97
Important compatibility info
| Additional Information 2 | with anti-squeak plate |
| Replaces | 16832 |
| Placement on Vehicle | Rear Axle |
| Length | 73 mm |
| Width | 70.5 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 15.2 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.98
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Outer diameter | 72.1 mm |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
Technical Information
Please tighten the mounting bolts with the wheels on the ground.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.98
Important compatibility info
| Material | PP (Polypropylene) |
| Colour | White |
| Function | Expansion Tank, coolant |
| Type | Expansion Tank, coolant |
| Additional Information 2 | without lid |
| for OE number | 13 04 643 |
| Additional Information | without coolant level sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.98
Important compatibility info
| Number of Connectors / Ports | 3 |
| Function | Sensor, camshaft position |
| Type | Sensor, camshaft position |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.98
Important compatibility info
| Length | 1795 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 8 |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.98
Important compatibility info
| Placement on Vehicle | Rear Axle, Wheel Side |
| Function | Bellow Kit, drive shaft |
| Inner diameter 2 | 63 mm |
| Inner diameter 1 | 25 mm |
| Material | Rubber |
| Additional Information 2 | with clamps |
| Additional Information | with fastening/mounting material |
| Type | Bellow Kit, drive shaft |
| Length | 99 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (08405)
- 1x Febi Fastening Clamp (08408)
- 1x Febi Fastening Clamp (08406)
- 1x Febi Seal Ring (08463)
- 1x Febi Seal Ring (08464)
- 1x Febi Split Sleeve (08461)
- 1x Febi Split Sleeve (08462)
£17.99
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 453 mm |
| Housing Diameter | 19 mm |
| Eject Force | 550 N |
| Stroke | 173 mm |
| Mounting points diameter | 16.5 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 253.5 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.99
Important compatibility info
| Thread Type | with right-hand thread |
| Additional Information 2 | with seal ring, without integrated oil separator |
| Function | Air Dryer Cartridge, compressed-air system |
| Material | Steel |
| Outer diameter | 140 mm |
| Internal Thread Size | M39 x 1,5 |
| Thickness | 164 mm |
| Colour | Black |
| Type | Air Dryer Cartridge, compressed-air system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.99
Important compatibility info
| Material | PP (Polypropylene) |
| Colour | White |
| Function | Expansion Tank, coolant |
| Type | Expansion Tank, coolant |
| Additional Information 2 | with lid |
| for OE number | 98 007 772 80 S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Expansion Tank, coolant (104940)
- 1x Febi Cap, coolant tank (37600)
£17.99
Important compatibility info
| Placement on Vehicle | Interior Door Panel, Right |
| Material | Plastic, Aluminium |
| Paired article numbers | 170047 |
| Colour | Black, Grey |
| Function | Door Handle, interior equipment |
| Extra Description | febi Plus |
| Type | Door Handle, interior equipment |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.99
Important compatibility info
| Material | Plastic, Aluminium |
| Paired article numbers | 170045 |
| Colour | Black, Grey |
| Function | Door Handle, interior equipment |
| Extra Description | febi Plus |
| Type | Door Handle, interior equipment |
| Placement on Vehicle | Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.99
Important compatibility info
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Thickness/Strength 1 | 17.2 mm |
| Inspection Tag | ECE R90 Approved |
| Width | 47 mm |
| Length | 92.1 mm |
| Placement on Vehicle | Rear Axle |
| Additional Information 2 | with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.99
Important compatibility info
| Placement on Vehicle | frontal sided |
| Width | 10.5 mm |
| Material | FPM (fluoride rubber) |
| Outer diameter | 60 mm |
| Inner diameter | 42 mm |
| Type | Shaft Seal, crankshaft |
| Function | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.99
Important compatibility info
| Function | Hose, cylinder head cover ventilation |
| for OE number | 06F 103 221 E |
| Air Supply Hoses/Pipes | from valve (crankcase ventilation) to intake manifold |
| Extra Description | febi Plus |
| Additional Information 2 | with quick couplers |
| Type | Hose, cylinder head cover ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.99
Important compatibility info
| Spanner Size | 38 |
| Length | 225 mm |
| Function | Inner Tie Rod |
| Type | Inner Tie Rod |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| External Thread Size | M20 x 1,5 |
| Outer diameter | 41 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.99
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Cone Size | 18 mm |
| Mounting points diameter | 10.2 mm |
| Function | Ball Joint |
| Additional Information | with crown nut and split pin |
| Additional Information 2 | with bolts/screws |
| Extra Description | ProKit |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Replaces | 41822 |
| External Thread Size | M12 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.00
Important compatibility info
| Function | Cable Pull, parking brake |
| Placement on Vehicle | Left Rear, Right Rear |
| Length | 1319 mm |
| Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.00
Important compatibility info
| Height | 55 mm |
| Width | 130 mm |
| Function | Hydraulic Filter, automatic transmission |
| Length | 185 mm |
| Type | Hydraulic Filter, automatic transmission |
| Filter type | Screen Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.00
Important compatibility info
| Width of castor bearing surface | 26 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Outer diameter | 69.1 mm |
| Material | Plastic |
| Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.00
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, Front |
| Material | Rubber/Metal |
| Outer diameter | 70.4 mm |
| Thickness | 70 mm |
| Type | Mounting, control/trailing arm |
| Function | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.00
Important compatibility info
| Material | Plastic |
| Outer diameter | 67 mm |
| Number of Ribs | 6 |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| External Thread Size | M8 x 1,25 |
| Width of castor bearing surface | 25 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Additional Information 2 | with screw |
| Inner diameter | 8 mm |
| Mounting points diameter | 8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.01
Important compatibility info
| Length | 116.3 mm |
| Valve stem diameter | 5 mm |
| Valve head diameter | 27.5 mm |
| Notches / Holes Number | 3 |
| Function | Exhaust Valve |
| Type | Exhaust Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.01
Important compatibility info
| Function | Tie Rod End |
| Thread Type | with left-hand thread |
| Cone Size | 28.6 mm |
| Colour | Grey |
| Thread Length | 85 mm |
| Placement on Vehicle | Front Axle Left |
| Length | 120 mm |
| Material | Steel |
| Outer diameter | 23.5 mm. 69 mm |
| Thickness | 120 mm |
| Spanner Size | 30 |
| Paired article numbers | 06240 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| External Thread Size | M30 x 1,5 LHT, M20 x 1,5 |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.01
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Colour | Grey |
| Outer diameter | 24 mm. 70 mm |
| Material | Steel |
| Spanner Size | 30 |
| Paired article numbers | 06239 |
| External Thread Size | M30 x 1,5 RHT, M20 x 1,5 |
| Cone Size | 28.6 mm |
| Thread Type | with right-hand thread |
| Thickness | 120 mm |
| Length | 120 mm. 87 mm |
| Extra Description | ProKit |
| Additional Information 2 | with crown nut |
| Type | Angled Ball Joint, steering push rod / Tie Rod End |
| Function | Angled Ball Joint, steering push rod / Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.01
Important compatibility info
| External Thread Size | M18 x 1,5 |
| Placement on Vehicle | Lower, Front Axle Left, Front Axle Right |
| Cone Size | 21 mm |
| Type | Ball Joint |
| Function | Ball Joint |
| Steering arm type | for control arm |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.01
Important compatibility info
| Friction Lining Material | Plastic |
| Function | Guide, timing chain |
| Colour | Black, Brown |
| Inner diameter | 8 mm |
| Material | Plastic |
| Type | Guide, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.01
Important compatibility info
| Function | Toothed Belt, power take-off |
| Width | 10 mm |
| Number of Teeth | 46 |
| Belts | with trapezoidal tooth profile |
| Surface | PTFE (Polytetrafluorethylene) coated |
| Type | Toothed Belt, power take-off |
| Units / Pulleys | Oil pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.01
Important compatibility info
| Function | Sensor, wheel speed |
| Cable Length | 970 mm |
| Placement on Vehicle | Front Axle Left |
| Number of Connectors / Ports | 2 |
| Type | Sensor, wheel speed |
| Paired article numbers | 174828 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.01
Important compatibility info
| Type | Dust Cover Kit, shock absorber |
| Placement on Vehicle | Rear Axle |
| Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Dust Cover Kit, shock absorber (177268)
£18.01
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 102 mm |
| Additional Information 2 | with nut |
| Spanner Size | 19 |
| Type | Tie Rod End |
| Function | Tie Rod End |
| Extra Description | ProKit |
| External Thread Size | M12 x 1,25 |
| Internal Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.01
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023