Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right | 
| Function | Ball Joint | 
| Cone Size | 12.9 mm | 
| Mounting points diameter | 10.5 mm | 
| External Thread Size | M12 x 1,5 | 
| Type | Ball Joint | 
| Steering arm type | for control arm | 
| Additional Information | with lock nut | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right | 
| Width | 35 mm | 
| Outer diameter | 65 mm | 
| Inner diameter | 35 mm | 
| Bearing Type | Angular Ball Bearing | 
| Function | Wheel Bearing Kit | 
| Type | Wheel Bearing Kit | 
| Additional Information 2 | with crown nut, with retaining ring | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Nut, kingpin (10736)
 - 1x Febi Circlip (07806)
 
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right | 
| Width | 18 mm | 
| Outer diameter | 65 mm. 50 mm | 
| Inner diameter | 35 mm. 21 mm | 
| Bearing Type | Tapered Roller Bearing | 
| Function | Wheel Bearing Kit | 
| Type | Wheel Bearing Kit | 
| Additional Information 2 | with shaft seal | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (174060)
 - 1x Febi Wheel Bearing (174059)
 - 1x Febi Split Pin (173993)
 
Important compatibility info
| Placement on Vehicle | Rear Axle | 
| Length | 338 mm | 
| Outer diameter | 123 mm | 
| Function | Suspension Spring | 
| Type | Suspension Spring | 
| Wire Diameter | 10.5 mm | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 2 | 
| Function | Sensor, intake air temperature | 
| Type | Sensor, intake air temperature | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M14 x 1,5 | 
| Placement on Vehicle | Front Axle Left | 
| Function | Link/Coupling Rod, stabiliser bar | 
| Length | 119 mm | 
| Diameter | 1 mm | 
| Material | Steel | 
| Spanner Size | 22 | 
| Paired article numbers | 183104 | 
| Additional Information | with nuts | 
| Type | Link/Coupling Rod, stabiliser bar | 
| Thread Length | 23 mm | 
| Rod/Strut | Coupling Rod | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with nuts | 
| Rod/Strut | Coupling Rod | 
| Spanner Size | 22 | 
| Thread Length | 23 mm | 
| Function | Link/Coupling Rod, stabiliser bar | 
| External Thread Size | M14 x 1,5 | 
| Paired article numbers | 183102 | 
| Type | Link/Coupling Rod, stabiliser bar | 
| Material | Steel | 
| Diameter | 1 mm | 
| Length | 119 mm | 
| Placement on Vehicle | Front Axle Right | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Sensor, wheel speed | 
| Type | Sensor, wheel speed | 
| Cable Length | 885 mm | 
| Placement on Vehicle | Front Axle Left, Front Axle Right | 
| Number of Connectors / Ports | 2 | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle | 
| Length | 129.3 mm | 
| Width | 57 mm | 
| Wear Warning Contact | excl. wear warning contact | 
| Inspection Tag | ECE R90 Approved | 
| Thickness/Strength 1 | 17.6 mm | 
| Type | Brake Pad Set, disc brake | 
| Function | Brake Pad Set, disc brake | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Ribs | 6 | 
| Function | V-Ribbed Belt | 
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) | 
| Length | 2000 mm | 
| Type | V-Ribbed Belt | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Paired article numbers | 180232 | 
| Length | 716 mm | 
| Type | Brake Hose | 
| Function | Brake Hose | 
| Internal Thread Size | M10 x 1 | 
| Placement on Vehicle | Front Axle Right | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle | 
| Type | Dust Cover Kit, shock absorber | 
| Function | Dust Cover Kit, shock absorber | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (27847)
 - 2x Febi Protective Cap/Bellow, shock absorber (28529)
 
Important compatibility info
| Inner diameter | 75 mm | 
| Function | Air Filter | 
| Filter type | Filter Insert | 
| Type | Air Filter | 
| Outer diameter | 124 mm | 
| Height | 320 mm | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Mounting points diameter | 10.5 mm | 
| Replaces | 26082 | 
| Placement on Vehicle | Front Axle Left, Lower | 
| Paired article numbers | 36736 | 
| Additional Information | with nuts | 
| Function | Ball Joint | 
| Extra Description | ProKit | 
| Type | Ball Joint | 
| Steering arm type | for control arm | 
| Cone Size | 19 mm | 
| Replaced by | 26082 | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ball Joint (26082)
 - 3x Febi Nut, Supporting / Ball Joint (36734)
 
Important compatibility info
| Extra Description | febi Plus | 
| Material | Plastic | 
| Function | Oil Separator, crankcase ventilation | 
| Type | Oil Separator, crankcase ventilation | 
| Additional Information | with gaskets/seals | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Filter type | Filter Insert | 
| Length | 80 mm | 
| Outer diameter | 30 mm | 
| Type | Fuel filter | 
| Function | Fuel filter | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right | 
| Length | 248 mm | 
| Function | Inner Tie Rod | 
| External Thread Size | M16 x 1,5, M14 x 1,5 | 
| Additional Information | with counter nut | 
| Extra Description | ProKit | 
| Type | Inner Tie Rod | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left | 
| Number of Connectors / Ports | 2 | 
| Cable Length | 1145 mm | 
| Type | Sensor, wheel speed | 
| Function | Sensor, wheel speed | 
| Paired article numbers | 175498 | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Operating Mode | Electric | 
| Spanner Size | 27 | 
| Number of Connectors / Ports | 2 | 
| Function | Switch, reverse light | 
| Type | Switch, reverse light | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Ribs | 5 | 
| Type | V-Ribbed Belt | 
| Function | V-Ribbed Belt | 
| Length | 1794 mm | 
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right | 
| Material | Aluminium | 
| Type | Wheel Brake Cylinder | 
| Function | Wheel Brake Cylinder | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 3 | 
| Spanner Size | 21 | 
| Type | Pressure Switch, air conditioning | 
| Function | Pressure Switch, air conditioning | 
| External Thread Size | 3/8 " 24 UNF | 
| Material | Aluminium | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle | 
| Length | 114.9 mm | 
| Width | 60.2 mm | 
| Inspection Tag | ECE R90 Approved | 
| Thickness/Strength 1 | 17.4 mm | 
| Type | Brake Pad Set, disc brake | 
| Function | Brake Pad Set, disc brake | 
| Additional Information 2 | with bolts/screws | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | both sides | 
| Length | 431 mm | 
| Housing Diameter | 18 mm | 
| Eject Force | 330 N | 
| Stroke | 173 mm | 
| Piston conrod diameter | 8 mm | 
| Function | Gas Spring, boot/cargo area | 
| Replaces | 25214 | 
| Type | Gas Spring, boot/cargo area | 
| Mounting points diameter | 18 mm | 
| Housing length | 236.5 mm | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right | 
| Outer diameter | 200 mm | 
| Inner diameter | 147 mm | 
| Number of Teeth, ABS ring | 80 | 
| Function | Sensor Ring, ABS | 
| Type | Sensor Ring, ABS | 
| Material | Steel | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width of castor bearing surface | 26 mm | 
| Width | 42 mm | 
| Material | Plastic | 
| Outer diameter | 70 mm | 
| Function | Deflection/Guide Pulley, v-ribbed belt | 
| Type | Deflection/Guide Pulley, v-ribbed belt | 
| Additional Information 2 | with screw | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Lower | 
| Engine Management | Timing Chain | 
| for OE number | 11 31 1 726 480 | 
| Function | Guide, timing chain | 
| Friction Lining Material | Plastic | 
| Type | Guide, timing chain | 
| Material | Plastic | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Colour | Green | 
| Function | Gasket, automatic transmission oil sump | 
| Material | Paper | 
| Type | Gasket, automatic transmission oil sump | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M14 x 1,5 | 
| Additional Information | with counter nut | 
| Function | Inner Tie Rod | 
| Placement on Vehicle | Front Axle Left, Front Axle Right | 
| Extra Description | ProKit | 
| Type | Inner Tie Rod | 
| Replaces | 36658 | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right | 
| Material | Steel | 
| Outer diameter | 131 mm. 162 mm | 
| Thickness | 80 mm | 
| Inner diameter | 102 mm. 128 mm | 
| Number of Teeth, ABS ring | 80 | 
| Function | Sensor Ring, ABS | 
| Type | Sensor Ring, ABS | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M14 x 2 | 
| Paired article numbers | 42114 | 
| Function | Ball Joint | 
| Additional Information 2 | with crown nut | 
| Placement on Vehicle | Front Axle Right, Lower | 
| Cone Size | 17.5 mm | 
| Mounting points diameter | 13 mm | 
| Type | Ball Joint | 
| Steering arm type | for control arm | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Interior Door Panel, Front, Left | 
| Material | Plastic | 
| Paired article numbers | 101985 | 
| Colour | Black | 
| Function | Door Handle, interior equipment | 
| Extra Description | febi Plus | 
| Type | Door Handle, interior equipment | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right | 
| Function | Tie Rod End | 
| Paired article numbers | 102847 | 
| External Thread Size | M12 x 1,5 | 
| Length | 94 mm | 
| Type | Tie Rod End | 
| Additional Information 2 | with nut | 
| Internal Thread Size | M16 x 1,5 | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (102848)
 - 1x Febi Nut (45868)
 
Important compatibility info
| Function | Sensor, camshaft position | 
| Number of Connectors / Ports | 2 | 
| Outer diameter | 18 mm | 
| Length | 52.5 mm | 
| Type | Sensor, camshaft position | 
| Additional Information 2 | with seal ring | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Internal Thread Size | M18 x 1,5 | 
| Placement on Vehicle | Front Axle Left | 
| Length | 117 mm | 
| Paired article numbers | 171610 | 
| Function | Tie Rod End | 
| Extra Description | ProKit | 
| External Thread Size | M14 x 2 | 
| Type | Tie Rod End | 
| Additional Information | with lock nut | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 95 mm | 
| Inner diameter | 31 mm | 
| Type | Bushing, leaf spring | 
| Function | Bushing, leaf spring | 
| Material | Rubber/Metal | 
| Length | 92 mm | 
| Placement on Vehicle | Rear Axle Left, Rear Axle Right | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Plastic | 
| Height | 42 mm | 
| Outer diameter | 105 mm | 
| Type | Rolling Bearing, suspension strut support mount | 
| Function | Rolling Bearing, suspension strut support mount | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left | 
| Length | 220 mm | 
| Paired article numbers | 38968 | 
| Function | Tie Rod End | 
| Internal Thread Size | M14 x 1,5 | 
| External Thread Size | M14 x 1,5 | 
| Additional Information | with lock nut | 
| Type | Tie Rod End | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 55 mm | 
| Filter type | In-Line Filter | 
| Type | Fuel filter | 
| Function | Fuel filter | 
| Height | 256 mm | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 152.8 mm | 
| Outer diameter | 169.5 mm | 
| Filter type | Filter Insert | 
| Type | Air Filter | 
| Inner diameter | 90.5 mm | 
| Function | Air Filter | 
| Additional Information 2 | with pre-filter | 
| Weight | 0.40 kg | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle | 
| Length | 123.2 mm | 
| Width | 43.8 mm | 
| Wear Warning Contact | with acoustic wear warning | 
| Inspection Tag | ECE R90 Approved | 
| Thickness/Strength 1 | 13.8 mm | 
| Type | Brake Pad Set, disc brake | 
| Function | Brake Pad Set, disc brake | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Brake Pad Set, disc brake | 
| Type | Brake Pad Set, disc brake | 
| Thickness/Strength 1 | 14.8 mm | 
| Width | 37.8 mm | 
| Wear Warning Contact | with acoustic wear warning | 
| Inspection Tag | ECE R90 Approved | 
| Length | 105.5 mm | 
| Placement on Vehicle | Rear Axle | 
| Replaces | 170242 | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Brake Hose | 
| Function | Brake Hose | 
| Paired article numbers | 177091 | 
| Length | 460 mm | 
| Placement on Vehicle | Front Axle Left | 
| External Thread Size | M10 x 1 | 
| Internal Thread Size | M10 x 1 | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front, Right | 
| Length | 267 mm | 
| Paired article numbers | 179010 | 
| Filter type | Filter Insert | 
| Type | Air Filter | 
| Additional Information 2 | with pre-filter | 
| Height | 39 mm | 
| Width | 216 mm | 
| Function | Air Filter | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front, Left | 
| Height | 39 mm | 
| Length | 267 mm | 
| Width | 216 mm | 
| Filter type | Filter Insert | 
| Type | Air Filter | 
| Function | Air Filter | 
| Paired article numbers | 179009 | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Dust Cover Kit, shock absorber | 
| Type | Dust Cover Kit, shock absorber | 
| Placement on Vehicle | Front Axle | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Protective Cap/Bellow, shock absorber (108096)
 - 2x Febi Rubber Buffer, suspension (44726)
 
Important compatibility info
| Length | 244 mm | 
| Height | 31 mm | 
| Width | 200 mm | 
| Additional Information 2 | with bolts/screws, with seal ring | 
| Filter type | Screen Filter | 
| Function | Hydraulic Filter Kit, automatic transmission | 
| Type | Hydraulic Filter Kit, automatic transmission | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Hydraulic Filter, automatic transmission (11672)
 - 1x Febi Seal Ring, hydraulic filter (11673)
 - 3x Febi Screw (11674)
 
Important compatibility info
| External Thread Size | M14 x 1,5, M42 x 1,5 | 
| Placement on Vehicle | Rear Axle Left, Rear Axle Right | 
| Additional Information | with lock nut | 
| Function | Ball Joint | 
| Cone Size | 19.9 mm | 
| Type | Ball Joint | 
| Additional Information 2 | with retaining ring | 
| Steering arm type | for control arm | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ball Joint (46138)
 
Important compatibility info
| Placement on Vehicle | Front Axle | 
| Length | 118.8 mm | 
| Width | 69.5 mm | 
| Wear Warning Contact | excl. wear warning contact | 
| Inspection Tag | ECE R90 Approved | 
| Thickness/Strength 1 | 15.2 mm | 
| Function | Brake Pad Set, disc brake | 
| Replaces | 16046 | 
| Type | Brake Pad Set, disc brake | 
| Additional Information 2 | with bolts/screws | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | both sides | 
| Length | 349 mm | 
| Housing Diameter | 18 mm | 
| Eject Force | 320 N | 
| Stroke | 101 mm | 
| Mounting points diameter | 15 mm | 
| Piston conrod diameter | 8 mm | 
| Function | Gas Spring, boot/cargo area | 
| Housing length | 221.5 mm | 
| Colour | black | 
| Type | Gas Spring, boot/cargo area | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
                  
                
                  
                
                  
                
                  
                
                  
                
                  
                All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































