Important compatibility info
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
| Sensor Type | Active sensor |
| Manufacturer | OPEL VAUXHALL |
| Model | ASTRA INSIGNIA ZAFIRA |
| Cable Length | 290 mm |
| Number of Poles | 2 -pin connector |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
| Sensor Type | Active sensor |
| Manufacturer | OPEL VAUXHALL |
| Model | ASTRA INSIGNIA ZAFIRA |
| Cable Length | 290 mm |
| Number of Poles | 2 -pin connector |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
| Cable Length | 580 mm |
| Colour Coding | Black |
| Number of Poles | 2 -pin connector |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
| Sensor Type | Active sensor |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
| Cable Length | 580 mm |
| Colour Coding | Black |
| Number of Poles | 2 -pin connector |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
| Sensor Type | Active sensor |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
| Placement on Vehicle | Lower, Front Axle Left, Front Axle Right |
| Type | Ball Joint |
| Function | Ball Joint |
| Paired article numbers | AST0351 |
Important compatibility info
| Placement on Vehicle | Lower, Front Axle Left, Front Axle Right |
| Type | Ball Joint |
| Function | Ball Joint |
| Paired article numbers | AST0351 |
Important compatibility info
| Function | Link/Coupling Rod, stabiliser bar |
| Rod/Strut | Coupling Rod |
| Type | Link/Coupling Rod, stabiliser bar |
| Model | A4 A6 A8 ALLROAD PASSAT S8 |
| Manufacturer | AUDI VOLKSWAGEN |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Paired article numbers | AST4006 |
Important compatibility info
| Function | Link/Coupling Rod, stabiliser bar |
| Rod/Strut | Coupling Rod |
| Type | Link/Coupling Rod, stabiliser bar |
| Model | A4 A6 A8 ALLROAD PASSAT S8 |
| Manufacturer | AUDI VOLKSWAGEN |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Paired article numbers | AST4006 |
Important compatibility info
| Thread Size | M12x1.2 |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Model | HILUX LAND CRUISER PRADO |
| Manufacturer | TOYOTA |
| Placement on Vehicle | Front Axle Right |
| Type | Link/Coupling Rod, stabiliser bar |
| Length | 139 mm |
| Paired article numbers | AST4369 |
Important compatibility info
| Thread Size | M12x1.2 |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Model | HILUX LAND CRUISER PRADO |
| Manufacturer | TOYOTA |
| Placement on Vehicle | Front Axle Right |
| Type | Link/Coupling Rod, stabiliser bar |
| Length | 139 mm |
| Paired article numbers | AST4369 |
Important compatibility info
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
| Rod/Strut | Coupling Rod |
| Length | 145 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Thread Size | 5R;MM10X1 |
| Manufacturer | VOLVO |
| Model | XC40 |
| Paired article numbers | AST4584 |
Important compatibility info
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
| Rod/Strut | Coupling Rod |
| Length | 145 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Thread Size | 5R;MM10X1 |
| Manufacturer | VOLVO |
| Model | XC40 |
| Paired article numbers | AST4584 |
Important compatibility info
| Function | Gasket, exhaust manifold |
| Type | Gasket, exhaust manifold |
Important compatibility info
| Function | Gasket, exhaust manifold |
| Type | Gasket, exhaust manifold |
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Height | 43 mm |
| Type | Suspension Strut Support Mount Kit |
| Function | Suspension Strut Support Mount Kit |
| Additional Information 2 | with ball bearing |
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Height | 43 mm |
| Type | Suspension Strut Support Mount Kit |
| Function | Suspension Strut Support Mount Kit |
| Additional Information 2 | with ball bearing |
Important compatibility info
| Length | 1140 mm |
| Number of Ribs | 6 |
| Function | V-Ribbed Belt |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 1140 mm |
| Number of Ribs | 6 |
| Function | V-Ribbed Belt |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Paired article numbers | ADBP530046 |
| Length | 518 mm |
| Placement on Vehicle | Rear Axle Left |
| Function | Brake Hose |
| Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Paired article numbers | ADBP530046 |
| Length | 518 mm |
| Placement on Vehicle | Rear Axle Left |
| Function | Brake Hose |
| Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Bellow Kit, drive shaft |
| Inner diameter 2 | 81 mm |
| Material | Thermoplast |
| Length | 113 mm |
| Placement on Vehicle | Wheel Side, Front Axle |
| Type | Bellow Kit, drive shaft |
| Inner diameter 1 | 25 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Bellow Kit, drive shaft |
| Inner diameter 2 | 81 mm |
| Material | Thermoplast |
| Length | 113 mm |
| Placement on Vehicle | Wheel Side, Front Axle |
| Type | Bellow Kit, drive shaft |
| Inner diameter 1 | 25 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Piston Diameter | 20.6 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Function | Wheel Brake Cylinder |
| Material | Cast Iron |
| Type | Wheel Brake Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Piston Diameter | 20.6 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Function | Wheel Brake Cylinder |
| Material | Cast Iron |
| Type | Wheel Brake Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Cable Length | 165 mm |
| Number of Connectors / Ports | 2 |
| Function | Sensor, crankshaft pulse |
| Type | Sensor, crankshaft pulse |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Cable Length | 165 mm |
| Number of Connectors / Ports | 2 |
| Function | Sensor, crankshaft pulse |
| Type | Sensor, crankshaft pulse |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Paired article numbers | ADG087143 |
| Length | 165 mm |
| Placement on Vehicle | Front Axle Left |
| Function | Inner Tie Rod |
| External Thread Size | M14 x 1,5, M18 x 1,5 |
| Type | Inner Tie Rod |
| Additional Information | with counter nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Paired article numbers | ADG087143 |
| Length | 165 mm |
| Placement on Vehicle | Front Axle Left |
| Function | Inner Tie Rod |
| External Thread Size | M14 x 1,5, M18 x 1,5 |
| Type | Inner Tie Rod |
| Additional Information | with counter nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Paired article numbers | ADG087142 |
| Length | 166 mm |
| Placement on Vehicle | Front Axle Right |
| Function | Inner Tie Rod |
| Type | Inner Tie Rod |
| External Thread Size | M14 x 1,5, M18 x 1,5 |
| Additional Information | with counter nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Paired article numbers | ADG087142 |
| Length | 166 mm |
| Placement on Vehicle | Front Axle Right |
| Function | Inner Tie Rod |
| Type | Inner Tie Rod |
| External Thread Size | M14 x 1,5, M18 x 1,5 |
| Additional Information | with counter nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023














