Proud to be a UK-based company
Contact us
Important compatibility info
| External Thread Size | M12 x 1,25 |
| Internal Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle Left |
| Length | 193 mm |
| Thickness | 76 mm |
| Spanner Size | 17 |
| Paired article numbers | 42477 |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information | with crown nut and split pin |
| Replaces | 42485 |
Additional Information
Technical Information
If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.84
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 193 mm |
| Thickness | 76 mm |
| Spanner Size | 17 |
| Paired article numbers | 42476 |
| Function | Tie Rod End |
| Internal Thread Size | M14 x 1,5 |
| External Thread Size | M12 x 1,25 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information | with crown nut and split pin |
| Replaces | 42486 |
Additional Information
Technical Information
If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.84
Important compatibility info
| Function | Sensor Ring, ABS |
| Type | Sensor Ring, ABS |
| Number of Teeth, ABS ring | 80 |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Inner diameter | 150 mm |
| Outer diameter | 175 mm |
| Material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.84
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| External Thread Size | M14 x 1,5 |
| Function | Ball Joint |
| Hub fastening hole diameter | 45 mm |
| Cone Size | 22 mm |
| Mounting points diameter | 13 mm |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Additional Information | with lock nut |
Additional Information
Technical Information
If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.84
Important compatibility info
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Width of castor bearing surface | 28 mm |
| Material | Plastic |
| Outer diameter | 70 mm |
| Inner diameter | 8 mm |
| Mounting points diameter | 8 mm |
| Function | Deflection/Guide Pulley, V-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.84
Important compatibility info
| Inner diameter 2 | 7.35 mm |
| Function | Sleeve, nozzle holder |
| Material | Copper |
| Inner diameter 1 | 26 mm |
| Type | Sleeve, nozzle holder |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Repair Kit, injector holder (46401)
- 1x Febi Seal Ring (46402)
£18.85
Important compatibility info
| Height | 201 mm |
| Outer diameter | 107 mm |
| Chemical Properties | Contains silicate |
| Type | Coolant Filter |
| Function | Coolant Filter |
| Gasket outer diameter | 71.7 mm |
| Gasket inner diameter | 62.3 mm |
| Internal Thread Size | 1 1/16" - 16 UNF |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.85
Important compatibility info
| Length | 168 mm |
| Width | 138 mm |
| Material | Steel |
| Thickness | 28 mm |
| Function | Hydraulic Filter, automatic transmission |
| Type | Hydraulic Filter, automatic transmission |
| Filter type | Screen Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.85
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Ball Joint |
| Cone Size | 20.3 mm |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.86
Important compatibility info
| Function | Gasket Set, steering gear |
| Type | Gasket Set, steering gear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.86
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 122.9 mm |
| Width | 47 mm |
| Wear Warning Contact | excl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 16.5 mm |
| Function | Brake Pad Set, disc brake |
| Manufacturer | CITROEN PEUGEOT TOYOTA |
| Type | Brake Pad Set, disc brake |
| Model | 107 108 AYGO C1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.86
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 231 mm |
| Thickness | 86 mm |
| Spanner Size | 19 |
| Paired article numbers | 42482 |
| Function | Tie Rod End |
| External Thread Size | M12 x 1,25 |
| Internal Thread Size | M14 x 1,5 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information | with crown nut and split pin |
Additional Information
Technical Information
If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.86
Important compatibility info
| Internal Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle Right |
| Length | 231 mm |
| Thickness | 86 mm |
| Spanner Size | 19 |
| Paired article numbers | 42481 |
| Function | Tie Rod End |
| External Thread Size | M12 x 1,25 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information | with crown nut and split pin |
Additional Information
Technical Information
If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.86
Important compatibility info
| Type | Filter, cabin air |
| Function | Filter, cabin air |
| Width | 178 mm |
| Filter type | Activated Carbon Filter |
| Length | 179 mm |
| Height | 19 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.86
Important compatibility info
| Operating Pressure | 8 bar |
| Type | Quick Release Valve |
| Function | Quick Release Valve |
| Bore Diameter | 8 mm |
| Mounting bores distance | 44 mm |
| Internal Thread Size | M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.86
Important compatibility info
| Length | 155.1 mm. 156.4 mm |
| Function | Brake Pad Set, disc brake |
| Additional Information 2 | with anti-squeak plate, with piston clip |
| Placement on Vehicle | Front Axle |
| Width | 56.1 mm. 62.4 mm |
| Thickness/Strength 1 | 17.2 mm |
| Type | Brake Pad Set, disc brake |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.86
Important compatibility info
| Function | Coolant Pipe |
| Extra Description | febi Plus |
| Material | PA (polyamide) |
| Cooling Hose | from oil cooler to engine block |
| Type | Coolant Pipe |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.86
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Resistance | 1250 Ohm |
| Cable Length | 320 mm |
| Type | Sensor, wheel speed |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.86
Important compatibility info
| External Thread Size | M12 x 1,5 |
| Paired article numbers | 36875 |
| Function | Ball Joint |
| Cone Size | 20 mm |
| Extra Description | ProKit |
| Type | Ball Joint |
| Placement on Vehicle | Front Axle Right, Lower |
| Steering arm type | for control arm |
| Mounting points diameter | 17.4 mm |
| Additional Information | with attachment/mounting material |
Additional Information
Technical Information
If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.86
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Inner diameter | 25 mm |
| Bearing Type | Tapered Roller Bearing |
| Function | Wheel Bearing Kit |
| Width | 43 mm |
| Outer diameter | 55 mm |
| Type | Wheel Bearing Kit |
| Additional Information 2 | with retaining ring |
| Dust Cover | with dust cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (21843)
- 1x Febi Cap, wheel bearing (04947)
- 1x Febi Nut, kingpin (02346)
- 1x Febi Circlip (01679)
£18.86
Important compatibility info
| Function | V-Ribbed Belt |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Length | 1633 mm |
| Number of Ribs | 7 |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.86
Important compatibility info
| Function | Gasket Set, cylinder head cover |
| Type | Gasket Set, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.87
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Length | 80 mm |
| Width | 53 mm |
| Material | Rubber/Metal |
| Outer diameter | 53 mm |
| Thickness | 80 mm |
| Function | Mounting, control/trailing arm |
| Inner diameter | 14.4 mm |
| Type | Mounting, control/trailing arm |
Additional Information
Technical Information
If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.87
Important compatibility info
| Joint Type | Tripod Joint |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
| Material | Thermoplastic polyester elastomer |
| Length | 102 mm |
| Inner diameter 2 | 70 mm |
| Inner diameter 1 | 26 mm |
| Placement on Vehicle | transmission sided, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (181518)
- 1x Febi Molybdenum Grease (02582)
£18.87
Important compatibility info
| Type | Seal Kit, multi-valve |
| Function | Seal Kit, multi-valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.88
Important compatibility info
| Length | 370 mm |
| Width | 43 mm |
| Refrigerant | R 134a, R 1234yf |
| Type | Dryer, air conditioning |
| Function | Dryer, air conditioning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.88
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 203 mm |
| Spanner Size | 24, 22 |
| Paired article numbers | 170718 |
| Function | Tie Rod End |
| External Thread Size | M14 x 1,5 |
| Internal Thread Size | M16 x 1,5 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
Technical Information
After replacement, the optical driver assistance systems (cameras, radar, etc.) may need to be recalibrated. Please observe the manufacturer's instructions.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.88
Important compatibility info
| Length | 49 mm |
| Number of Connectors / Ports | 3 |
| Function | Sensor, camshaft position |
| Type | Sensor, camshaft position |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Seal Ring (26855)
£18.88
Important compatibility info
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
| Joint Type | CV Joint |
| Inner diameter 2 | 88 mm |
| Inner diameter 1 | 28 mm |
| Material | Thermoplastic polyester elastomer |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| Length | 109 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (176083)
- 1x Febi Molybdenum Grease (02582)
£18.89
Important compatibility info
| Function | Gasket, cylinder head cover |
| Material | NBR (nitrile butadiene rubber) |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.89
Important compatibility info
| Length | 54.5 mm |
| Number of Connectors / Ports | 3 |
| Function | Sensor, camshaft position |
| Type | Sensor, camshaft position |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.89
Important compatibility info
| for OE number | 51.06304.5459 |
| Type | Coolant Pipe |
| Function | Coolant Pipe |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.89
Important compatibility info
| Pipe Diameter | 10 mm |
| Type | Fuel filter |
| Function | Fuel filter |
| Height | 120 mm |
| Outer diameter | 98 mm |
| Filter type | In-Line Filter, without water sensor |
| Additional Information | with valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.90
Important compatibility info
| Type | Dust Cover Kit, shock absorber |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.90
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 260 mm |
| Diameter | 112 mm |
| Additional Information | with nuts |
| Material | Steel |
| Spanner Size | 22 |
| Rod/Strut | Coupling Rod |
| Thread Length | 28 mm |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M12 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.90
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 274 mm |
| Function | Suspension Spring |
| Wire Diameter | 11.8 mm |
| Type | Suspension Spring |
| Outer diameter | 123 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.90
Important compatibility info
| Width | 23 mm |
| Outer diameter | 90 mm |
| Inner diameter | 55 mm |
| Bearing Type | Tapered Roller Bearing |
| Function | Wheel Bearing |
| Placement on Vehicle | Rear Axle |
| Type | Wheel Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.90
Important compatibility info
| Air Supply Hoses/Pipes | from valve (crankcase ventilation) to oil filter |
| Function | Hose, cylinder head cover ventilation |
| Extra Description | febi Plus |
| for OE number | 06F 103 235 |
| Additional Information 2 | with quick couplers |
| Type | Hose, cylinder head cover ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.90
Important compatibility info
| Length | 164 mm |
| Material | Rubber/Metal |
| Outer diameter | 83 mm |
| Inner diameter | 13 mm |
| Paired article numbers | 27455 |
| Placement on Vehicle | Front Axle Right |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Height | 59 mm |
| Width | 151 mm |
| Additional Information 2 | without ball bearing |
| Internal Thread Size | M8 x 1,25 |
| Replaces | 102098 |
Additional Information
Technical Information
To identify the correct article, the currently installed product must be determined!
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.91
Important compatibility info
| Length | 2213 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 6 |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.91
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 300 mm |
| Width | 30 mm |
| Material | PU (Polyurethane), Plastic |
| Function | Dust Cover Kit, shock absorber |
| Type | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (36722)
- 2x Febi Protective Cap/Bellow, shock absorber (36604)
£18.91
Important compatibility info
| External Thread Size | M12 x 1,25 |
| Placement on Vehicle | Lower |
| Cone Size | 16 mm |
| Type | Ball Joint |
| Function | Ball Joint |
| Extra Description | ProKit |
| Cone Size 1 | 13.4 mm |
| Steering arm type | for control arm |
| Additional Information | with crown nut and split pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.91
Important compatibility info
| Length | 537 mm |
| Placement on Vehicle | both sides |
| Housing Diameter | 19 mm |
| Eject Force | 430 N |
| Stroke | 205 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 289 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.91
Important compatibility info
| Length | 1675 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 10 |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.91
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 160 mm |
| Function | Tie Rod End |
| Type | Tie Rod End |
| External Thread Size | M14 x 1,5 |
| Internal Thread Size | M16 x 1,5 |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.92
Important compatibility info
| Type | Gas Spring, boot/cargo area |
| Piston conrod diameter | 8 mm |
| Housing length | 279.5 mm |
| Eject Force | 320 N |
| Stroke | 191 mm |
| Housing Diameter | 18 mm |
| Length | 501 mm |
| Placement on Vehicle | both sides |
| Function | Gas Spring, boot/cargo area |
| Mounting points diameter | 18 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.92
Important compatibility info
| Length | 377 mm |
| Width | 152 mm |
| Thickness | 0.2 mm |
| Function | Gasket, cylinder head cover |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.92
Important compatibility info
| Inner diameter | 18 mm |
| Placement on Vehicle | Rear Axle Left, Rear |
| Outer diameter | 68 mm |
| Thickness | 60 mm |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, differential |
| Material | Rubber/Metal |
| Type | Mounting, differential |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.92
Important compatibility info
| Material | PU (Polyurethane), Rubber |
| Placement on Vehicle | Front Axle |
| Function | Dust Cover Kit, shock absorber |
| Type | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (12495)
- 2x Febi Protective Cap/Bellow, shock absorber (01367)
£18.92
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 50 mm |
| Width | 39 mm |
| Material | Rubber/Metal |
| Thickness | 50 mm |
| Inner diameter | 18 mm |
| Type | Mounting, stabiliser bar |
| Function | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.92
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023