Important compatibility info
Length | 46 mm |
Inner diameter | 2.54 mm |
Spanner Size | 24 |
Surface | Zinc-coated |
Thread Length | 13 mm |
Number of Connectors / Ports | 1 |
Colour Coding | Blue |
External Thread Size | M10 x 1 |
Function | Oil Pressure Switch |
Switch point to | 0.35 bar |
Switch point from | 0.15 bar |
Type | Oil Pressure Switch |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Function | Mounting, stabiliser bar |
Inner diameter 1 | 17 mm |
Inner diameter 2 | 19 mm |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Plastic |
Number of Connectors / Ports | 2 |
Function | Sensor, washer fluid level |
Type | Sensor, washer fluid level |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Steering arm type | Control Arm |
for OE number | 000000 002483 S1 |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Mounting and Bolting Kit, control/trailing arm |
Type | Mounting and Bolting Kit, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Screw, pressure plate (29278)
- 1x Febi Nut (22263)
Important compatibility info
Outer diameter | 106.8 mm |
Inner diameter | 105 mm |
Pipe Connector | Pipe Clamp |
Type | Pipe Connector, exhaust system |
Function | Pipe Connector, exhaust system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber |
Inner diameter | 26 mm |
Placement on Vehicle | Front Axle |
Function | Mounting, stabiliser bar |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Material | Rubber, Rubber with fabric lining |
Inner diameter | 28 mm |
Type | Mounting, stabiliser bar |
Function | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rims | for steel rims |
Screw length below head | 33 mm |
Material | Steel |
Function | Wheel Bolt |
Wheel Fastening | Ball seat A/G |
Quality/ Grade | 10.9 |
Bolt Head/Nut Design | External Hexagon |
Thread Length | 30 mm |
Surface | Zink flake coated |
Spanner Size | 19 |
Length | 59 mm |
Placement on Vehicle | Front Axle, Rear Axle |
External Thread Size | M14 x 1,5 |
Type | Wheel Bolt |
Outer diameter | 28 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Wheel Fastening | Conical Seat F |
Function | Wheel Bolt |
Screw length below head | 28 mm |
Placement on Vehicle | Front Axle, Rear Axle |
Length | 46.5 mm |
Material | Steel |
Outer diameter | 24.4 mm |
Spanner Size | 17 |
Bolt Head/Nut Design | External Hexagon |
Quality/ Grade | 10.9 |
Surface | Zinc-coated |
Thread Length | 24 mm |
Rims | for light alloy rims, for steel rims |
External Thread Size | M14 x 1,5 |
Type | Wheel Bolt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle, both sides |
Material | Rubber/Metal |
Outer diameter | 48 mm. 55 mm |
Thickness | 25 mm |
Inner diameter | 14 mm |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
Technical Information
Please tighten the mounting bolts with the wheels on the ground.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 270 mm |
Brake Type | Disc Brake |
Function | Warning Contact, brake pad wear |
Type | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 41 mm |
Spanner Size | 24 |
Thread Length | 12 mm |
Number of Connectors / Ports | 1 |
Colour Coding | Black |
External Thread Size | M12 x 1,5 |
Function | Oil Pressure Switch |
Switch point to | 0.5 bar |
Switch point from | 0.2 bar |
Type | Oil Pressure Switch |
Additional Information 2 | with seal ring |
Connector Shape | angular |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 130 mm |
Material | Rubber |
Inner diameter 1 | 9 mm |
Inner diameter 2 | 40 mm |
Function | Bellow, steering |
Type | Bellow, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter | 19 mm |
Placement on Vehicle | Rear Axle |
Material | Rubber/Metal |
Function | Mounting, stabiliser bar |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Gasket, cylinder head cover |
Material | Cork |
Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | NBR (nitrile butadiene rubber) |
Function | Gasket, automatic transmission oil sump |
Type | Gasket, automatic transmission oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 123 mm |
Width | 104 mm |
Material | Metal, NBR (nitrile butadiene rubber) |
Thickness | 0.4 mm |
Inner diameter | 73 mm |
Function | Gasket, fuel pump |
Type | Gasket, fuel pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 95 mm |
Brake Type | Disc Brake |
Function | Warning Contact, brake pad wear |
Type | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 87 mm |
Width | 28 mm |
Outer diameter | 36 mm |
Thickness | 35 mm |
Inner diameter | 7 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right, outer |
Function | Mounting, stabiliser bar |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Colour Coding | Yellow |
Thread Length | 16 mm |
Inner diameter | 8 mm |
Material | Rubber/Metal |
Length | 78 mm |
Placement on Vehicle | Front Axle Left, outer, Front Axle Right |
Function | Mounting, stabiliser bar |
External Thread Size | M8 x 1,25 |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Outer diameter | 66.5 mm |
Thickness | 60 mm |
Inner diameter | 41 mm |
Function | Mounting, stabiliser bar |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Internal Thread Size | 3/4" - 16 UNF |
Height | 76 mm |
Outer diameter | 78 mm |
Filter type | Spin-on Filter |
Type | Oil Filter |
Function | Oil Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 37 mm |
Spanner Size | 18 |
Surface | Phosphatized, Oiled |
Quality/ Grade | 10.9 |
Function | Pulley Bolt |
Screw length below head | 29 mm |
Type | Pulley Bolt |
External Thread Size | M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Mounting, stabiliser bar |
Inner diameter | 17 mm |
Material | Rubber |
Placement on Vehicle | Rear Axle |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Coolant Flange |
Placement on Vehicle | Radiator |
Type | Coolant Flange |
for OE number | 6Q0 122 291 E |
Additional Information | with quick coupling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter | 9.5 mm |
Function | Hose, crankcase ventilation |
Material | Rubber |
Outer diameter | 17.5 mm |
Extra Description | febi Plus |
Type | Hose, crankcase ventilation |
Hose Length | 225 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with seal ring |
Height | 93 mm |
Outer diameter | 77 mm |
Inner diameter | 19 mm |
Seal Diameter | 86 mm |
Length | 77 mm |
Type | Fuel filter |
Filter type | Filter Insert |
Function | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Aluminium, Rubber/Metal |
Outer diameter | 60 mm. 27 mm |
Thickness | 41 mm |
Inner diameter | 17 mm |
Placement on Vehicle | Front Axle Left, Lower, Rear, Front Axle Right |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
Technical Information
Please tighten the mounting bolts with the wheels on the ground.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Plastic |
Function | Coolant Flange |
Type | Coolant Flange |
Placement on Vehicle | Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Mounting, stabiliser bar |
Inner diameter | 25 mm |
Outer diameter | 62 mm |
Length | 47 mm |
Placement on Vehicle | Front Axle |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023