Important compatibility info
| Placement on Vehicle | Front Axle Left, Upper, Front Axle Right |
| Outer diameter | 67.5 mm |
| Function | Mounting, control/trailing arm |
| Mounting points diameter | 15 mm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Handle, bonnet release |
| Length | 172 mm. 155 mm |
| Function | Handle, bonnet release |
| Mounting points diameter | 9.5 mm |
| Colour | Black |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right |
| Material | Plastic |
| Function | Door Handle, interior equipment |
| Paired article numbers | 40044 |
| Colour | Black |
| Type | Door Handle, interior equipment |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Front Cover Lock |
| Function | Front Cover Lock |
| Placement on Vehicle | both sides |
| Width | 70.5 mm |
| Thickness | 61 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | ACM (Polyacrylate) |
| Outer diameter | 35 mm |
| Thickness | 7 mm |
| Inner diameter | 21.8 mm |
| Type | Shaft Seal, manual transmission |
| Function | Shaft Seal, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 221 mm |
| Paired article numbers | 43444 |
| Function | Tie Rod End |
| Extra Description | ProKit |
| External Thread Size | M10 x 1,25 |
| Internal Thread Size | M14 x 1,5 |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 221 mm |
| Paired article numbers | 43443 |
| Function | Tie Rod End |
| External Thread Size | M10 x 1,25 |
| Extra Description | ProKit |
| Internal Thread Size | M14 x 1,5 |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Internal Thread Size | M30 x 1,5 RHT |
| Length | 100 mm |
| Function | Bolt, wheel alignment |
| External Thread Size | M38 x 1,5 LHT |
| Type | Bolt, wheel alignment |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inner diameter | 40 mm. 52 mm |
| Paired article numbers | 43458 |
| Length | 150 mm |
| Material | Steel |
| Type | Mounting Bracket, shock absorber mounting (driver cab) |
| Function | Mounting Bracket, shock absorber mounting (driver cab) |
| Placement on Vehicle | Left |
| Internal Thread Size | M56 x 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle, Wheel Side |
| Material | Thermoplast |
| Inner diameter 1 | 30 mm |
| Inner diameter 2 | 88 mm |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (29956)
- 1x Febi Axle Bolt, drive shaft (40617)
- 1x Febi Molybdenum Grease (02582)
- 1x Febi Clamping Clip (45644)
- 1x Febi Clamping Clip (38758)
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Length | 90 mm |
| Material | Steel |
| Paired article numbers | 43454 |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M10 x 1,5 |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Length | 90 mm |
| Material | Steel |
| Paired article numbers | 43453 |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M10 x 1,5 |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Internal Thread Size | M56 x 3 |
| Paired article numbers | 43448 |
| Type | Mounting Bracket, shock absorber mounting (driver cab) |
| Placement on Vehicle | Right |
| Inner diameter | 40 mm. 52 mm |
| Material | Steel |
| Function | Mounting Bracket, shock absorber mounting (driver cab) |
| Length | 150 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 348 mm |
| Inner diameter | 12 mm |
| Spanner Size | 30 |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M12 x 1,75 |
| Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with counter nut |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 236 mm |
| Function | Inner Tie Rod |
| Internal Thread Size | M14 x 1,5 |
| External Thread Size | M14 x 1,5 |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | 43465 |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (38785)
- 1x Febi Tie Rod End (39941)
Important compatibility info
| Additional Information | with lock nut |
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 43464 |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (38785)
- 1x Febi Tie Rod End (39940)
Important compatibility info
| Placement on Vehicle | Front |
| Material | Rubber/Metal |
| Outer diameter | 135 mm. 132 mm |
| Thickness | 30 mm |
| Inner diameter | 50 mm |
| Number of Holes | 6 |
| Bolt Hole Circle Diameter | 96 mm |
| Function | Joint, propshaft |
| Extra Description | ProKit |
| Length | 61 mm |
| Type | Joint, propshaft |
| Replaces | 43471; 43476 |
| Thread Size | M12 x 1,5 |
| Additional Information | with nuts |
| Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (04435)
- 6x Febi Nut (40985)
- 6x Febi Screw (40943)
Important compatibility info
| Additional Information | with nuts |
| Additional Information 2 | with bolts/screws |
| Function | Joint, propshaft |
| Bolt Hole Circle Diameter | 78 mm |
| Number of Holes | 6 |
| Inner diameter | 38 mm |
| Thickness | 32 mm |
| Outer diameter | 110 mm |
| Material | Rubber/Metal |
| Extra Description | ProKit |
| Type | Joint, propshaft |
| for OE number | 26 11 1 227 869 S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (05084)
- 1x Febi Assembly Kit, propshaft joint (43422)
Important compatibility info
| Additional Information 2 | with bolts/screws |
| Material | Rubber/Metal |
| Thickness | 28 mm |
| Inner diameter | 50 mm |
| Number of Holes | 6 |
| Bolt Hole Circle Diameter | 96 mm |
| Function | Joint, propshaft |
| Additional Information | with nuts |
| Extra Description | ProKit |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (09203)
- 1x Febi Assembly Kit, propshaft joint (43422)
Important compatibility info
| Placement on Vehicle | Front |
| Material | Rubber/Metal |
| Outer diameter | 135 mm. 132 mm |
| Thickness | 30 mm |
| Inner diameter | 50 mm |
| Number of Holes | 6 |
| Bolt Hole Circle Diameter | 96 mm |
| Type | Joint, propshaft |
| Function | Joint, propshaft |
| Extra Description | ProKit |
| Additional Information | with nuts |
| Additional Information 2 | with bolts/screws, with washers |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (04435)
- 1x Febi Assembly Kit, propshaft joint (43425)
Important compatibility info
| Additional Information | with nuts |
| Additional Information 2 | with bolts/screws, with washers |
| Placement on Vehicle | Front |
| Material | Rubber/Metal |
| Outer diameter | 110 mm |
| Thickness | 32 mm |
| Inner diameter | 38 mm |
| Number of Holes | 6 |
| Bolt Hole Circle Diameter | 78 mm |
| Function | Joint, propshaft |
| External Thread Size | M14 x 1,5 |
| Extra Description | ProKit |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (05084)
- 1x Febi Assembly Kit, propshaft joint (43425)
Important compatibility info
| Additional Information 2 | with bolts/screws |
| Additional Information | with nuts |
| Material | Rubber/Metal |
| Number of Holes | 6 |
| Bolt Hole Circle Diameter | 110 mm |
| Function | Joint, propshaft |
| Extra Description | ProKit |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (19795)
- 1x Febi Assembly Kit, propshaft joint (43430)
Important compatibility info
| Width | 24 mm |
| Number of Teeth | 82 |
| Surface | Coated |
| Belts | with rounded tooth profile |
| Type | Timing Belt |
| Function | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with bolts/screws, with washers |
| Material | Rubber/Metal |
| Bolt Hole Circle Diameter | 110 mm |
| Function | Joint, propshaft |
| Number of Holes | 6 |
| Additional Information | with nuts |
| Extra Description | ProKit |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (19795)
- 1x Febi Assembly Kit, propshaft joint (43435)
Important compatibility info
| Placement on Vehicle | Front |
| Material | Rubber/Metal |
| Number of Holes | 6 |
| Bolt Hole Circle Diameter | 78 mm |
| Function | Joint, propshaft |
| Extra Description | ProKit |
| Type | Joint, propshaft |
| Additional Information 2 | with bolts/screws |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (19888)
- 1x Febi Assembly Kit, propshaft joint (43436)
Important compatibility info
| Housing material | Cast Aluminium |
| Additional Information | with gasket/seal |
| Number of Wings | 6 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Paper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 129 mm |
| Outer diameter | 129 mm |
| Thickness | 65 mm |
| Inner diameter | 25 mm |
| Bolt Hole Circle Diameter | 110 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Additional Information | with fastening/mounting material |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Width | 60 mm |
| Outer diameter | 75 mm |
| Inner diameter | 42 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Additional Information 2 | with retaining ring |
| Additional Information | with axle nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | FPM (fluoride rubber) |
| Outer diameter | 65 mm |
| Function | Shaft Seal, manual transmission |
| Inner diameter | 50 mm |
| Thickness | 13.5 mm |
| Type | Shaft Seal, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Teeth | 23 |
| Number of Wings | 9 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Additional Information | without gasket/seal |
| Housing material | Cast Aluminium |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Joint, propshaft |
| Placement on Vehicle | Rear |
| Outer diameter | 126 mm |
| Bolt Hole Circle Diameter | 96 mm |
| Additional Information 2 | with bolts/screws |
| Additional Information | with nuts |
| Extra Description | ProKit |
| Number of Holes | 6 |
| Type | Joint, propshaft |
| for OE number | 26 11 7 527 392 S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (26332)
- 1x Febi Assembly Kit, propshaft joint (43512)
Important compatibility info
| Placement on Vehicle | Rear |
| Outer diameter | 126 mm |
| Bolt Hole Circle Diameter | 96 mm |
| Function | Joint, propshaft |
| Extra Description | ProKit |
| Type | Joint, propshaft |
| for OE number | 26 11 7 527 392 S2 |
| Number of Holes | 6 |
| Additional Information 2 | with bolts/screws |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (26332)
- 1x Febi Assembly Kit, propshaft joint (43513)
Important compatibility info
| Function | Joint, propshaft |
| Bolt Hole Circle Diameter | 105 mm |
| Additional Information | with nuts |
| Number of Holes | 6 |
| Extra Description | ProKit |
| Additional Information 2 | with bolts/screws |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Assembly Kit, propshaft joint (43515)
Important compatibility info
| Additional Information | with nuts |
| Extra Description | ProKit |
| Type | Joint, propshaft |
| Function | Joint, propshaft |
| Bolt Hole Circle Diameter | 110 mm |
| Additional Information 2 | with bolts/screws |
| Number of Holes | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (26293)
- 1x Febi Assembly Kit, propshaft joint (43515)
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | 43525 |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (38814)
- 1x Febi Tie Rod End (40882)
Important compatibility info
| Function | Joint, propshaft |
| Bolt Hole Circle Diameter | 105 mm |
| Placement on Vehicle | Rear |
| Extra Description | ProKit |
| Type | Joint, propshaft |
| Additional Information | with nuts |
| Additional Information 2 | with bolts/screws |
| Number of Holes | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (26294)
- 1x Febi Assembly Kit, propshaft joint (43515)
Important compatibility info
| Thickness | 26 mm |
| Width | 20 mm |
| Length | 29 mm |
| Inner diameter | 9 mm |
| DIN / ISO | 1101 |
| Type | Safety Clamp |
| Function | Safety Clamp |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | ACM (Polyacrylate), PTFE (polytetrafluoroethylene) |
| Placement on Vehicle | frontal sided |
| Outer diameter | 40 mm |
| Thickness | 7 mm |
| Inner diameter | 30 mm |
| Function | Shaft Seal, crankshaft |
| Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | NBR (nitrile butadiene rubber) |
| Outer diameter | 15 mm |
| Thickness | 2.5 mm |
| Inner diameter | 10 mm |
| Function | Seal, fuel line |
| Type | Seal, fuel line |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Steering arm type | Semi-trailing Arm, Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Material | Sheet Steel |
| Placement on Vehicle | Rear Axle Left, Upper, Front, Rear Axle Right |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with fastening/mounting material, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (26208)
- 2x Febi Nut (34653)
- 1x Febi Bolt, control arm (43442)
- 1x Febi Screw (38098)
Important compatibility info
| Material | Sheet Steel |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 43543 |
| Steering arm type | Control Arm |
| Inner diameter | 12 mm |
| Placement on Vehicle | Rear Axle Left, Upper, Front |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with bolts/screws |
| Additional Information | with nuts, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (36402)
- 1x Febi Screw (38098)
- 2x Febi Nut (34653)
- 1x Febi Bolt, control arm (43442)
Important compatibility info
| Function | Bellow Kit, steering |
| Inner diameter 2 | 63 mm |
| Length | 200 mm |
| Material | Thermoplast |
| Inner diameter 1 | 16 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Additional Information 2 | with clamps |
| Type | Bellow Kit, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, steering (43549)
- 1x Febi Clamping Clip (38756)
- 1x Febi Clamping Clip (38764)
Important compatibility info
| Rod/Strut | Coupling Rod |
| Inner diameter | 10 mm |
| Placement on Vehicle | Rear Axle |
| Length | 110 mm |
| Thickness | 30 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| External Thread Size | M10 x 1,5 |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information 2 | with bolts/screws |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Link/Coupling Rod, stabiliser bar (40979)
- 1x Febi Screw (32561)
- 2x Febi Nut (06859)
Important compatibility info
| Belt Pulley Diameter | 153 mm |
| Pulleys | with belt pulley |
| Function | Compressor, air conditioning |
| Oil Fill Quantity | 175 ml |
| Number of grooves | 8 |
| Voltage | 24 V |
| Type | Compressor, air conditioning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Placement on Vehicle | Front Axle Left |
| Length | 290 mm |
| Paired article numbers | 43560 |
| External Thread Size | M12 x 1,75 |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Link/Coupling Rod, stabiliser bar |
| Paired article numbers | 43559 |
| Rod/Strut | Coupling Rod |
| Placement on Vehicle | Front Axle Right |
| Length | 290 mm |
| External Thread Size | M12 x 1,75 |
| Extra Description | ProKit |
| Additional Information | with nuts |
| Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of grooves | 8 |
| Function | Compressor, air conditioning |
| Belt Pulley Diameter | 136 mm |
| Oil Fill Quantity | 165 ml |
| Voltage | 24 V |
| Pulleys | with belt pulley |
| Type | Compressor, air conditioning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Steel |
| External Thread Size | M10 x 1,5 |
| Placement on Vehicle | Rear Axle Left |
| Length | 154 mm |
| Paired article numbers | 43574 |
| Rod/Strut | Coupling Rod |
| Thread Length | 24.5 mm |
| Pipe Diameter | 9 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
| Spanner Size | 17 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Length | 154 mm |
| Paired article numbers | 43573 |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Material | Steel |
| Pipe Diameter | 9 mm |
| Additional Information | with nuts |
| External Thread Size | M10 x 1,5 |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































