Important compatibility info
| Length | 191.6 mm |
| Valve stem diameter | 7.92 mm |
| Valve head diameter | 40 mm |
| Notches / Holes Number | 3 |
| Type | Exhaust Valve |
| Function | Exhaust Valve |
| Paired article numbers | 1004613 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 155.2 mm |
| Width | 72 mm. 66.7 mm |
| Wear Warning Contact | excl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 18.9 mm. 19.9 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Additional Information 2 | with piston clip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Lower, Centre |
| Length | 110 mm |
| Width | 93 mm |
| Thickness | 34 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Function | Splash Guard, brake disc |
| Extra Description | febi Plus |
| Type | Splash Guard, brake disc |
| Paired article numbers | 174922 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 40.2 mm |
| Thickness | 140 mm |
| Inner diameter | 14 mm |
| Type | Mounting, control/trailing arm |
| Function | Mounting, control/trailing arm |
| Material | Rubber/Metal |
| Placement on Vehicle | Lower, Front Axle Right, Front Axle Left, Front |
Additional Information
Technical Information
If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right, Lower |
| Function | Ball Joint |
| Cone Size | 18.5 mm |
| External Thread Size | M14 x 1,5 |
| Extra Description | ProKit |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Additional Information | with lock nut |
Additional Information
Technical Information
If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right, Lower, Front, inner |
| Material | Rubber/Metal |
| Outer diameter | 75.2 mm |
| Thickness | 85 mm |
| Inner diameter | 12.3 mm |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, control/trailing arm |
| Function | Mounting, control/trailing arm |
Additional Information
Technical Information
If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | febi Plus |
| Height | 90 mm |
| Function | Cap, oil filter housing |
| Type | Cap, oil filter housing |
| Additional Information 2 | with seal ring |
| Tightening Torque | 25 Nm |
| Outer diameter | 94 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with counter nut |
| Placement on Vehicle | Front Axle Right |
| Length | 258 mm |
| Paired article numbers | 29604 |
| Function | Tie Rod End |
| External Thread Size | M12 x 1,75 |
| Type | Tie Rod End |
| Internal Thread Size | M14 x 1,5 |
Additional Information
Technical Information
If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 258 mm |
| Paired article numbers | 29605 |
| Function | Tie Rod End |
| External Thread Size | M12 x 1,75 |
| Internal Thread Size | M14 x 1,5 |
| Type | Tie Rod End |
| Additional Information | with counter nut |
Additional Information
Technical Information
If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 20 mm |
| Outer diameter | 47 mm |
| Inner diameter | 18 mm |
| Bolt Hole Circle Diameter | 12 mm |
| Paired article numbers | 36820 |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle Left |
| Function | Repair Kit, suspension strut support mount |
| Type | Repair Kit, suspension strut support mount |
| Additional Information 2 | with ball bearing |
| Bearing Type | Rolling Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 137.8 mm |
| Width | 55 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 16.5 mm. 15.7 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 104 mm |
| Inner diameter | 24 mm |
| Function | Bushing, leaf spring |
| Thickness | 55 mm |
| Width | 55 mm |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Bushing, leaf spring |
| Outer diameter | 67 mm |
| Shape/Form | slotted |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Paired article numbers | 197153 |
| Type | Splash Guard, brake disc |
| Function | Splash Guard, brake disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Width | 39 mm |
| Outer diameter | 203 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 3 mm |
| Type | Brake Shoe Set |
| Function | Brake Shoe Set |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with adjuster |
| Type | Tailgate Lock |
| Function | Tailgate Lock |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Tie Rod End |
| Extra Description | ProKit |
| Cone Size | 20.2 mm |
| Type | Tie Rod End |
| External Thread Size | M20 x 1 |
| Thread Type | with right-hand thread |
| Additional Information 2 | with crown nut |
| Length | 81 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Brake Pad Set, disc brake |
| Thickness/Strength 1 | 15 mm |
| Inspection Tag | ECE R90 Approved |
| Wear Warning Contact | excl. wear warning contact |
| Width | 66.5 mm |
| Length | 104.4 mm |
| Placement on Vehicle | Front Axle |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thickness/Strength 1 | 17 mm |
| Function | Brake Pad Set, disc brake |
| Inspection Tag | ECE R90 Approved |
| Placement on Vehicle | Rear Axle |
| Wear Warning Contact | prepared for wear warning indicator |
| Width | 59 mm |
| Length | 106.2 mm |
| Type | Brake Pad Set, disc brake |
| Additional Information 2 | with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Number of Connectors / Ports | 2 |
| Cable Length | 1250 mm |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Lower, Rear |
| for OE number | 12364-0M050 |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with squeeze connector |
| Additional Information 2 | with plug |
| Number of Connectors / Ports | 8 |
| Cable Length | 250 mm |
| Type | Plug |
| Cross Section | 0.75 mm² |
| Function | Plug |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 465 mm |
| Type | Brake Hose |
| Function | Brake Hose |
| External Thread Size | M10 x 1 |
| Internal Thread Size | M10 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Rubber/Metal |
| Placement on Vehicle | Rear Axle |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Function | Tie Rod End |
| Placement on Vehicle | Front Axle Left |
| Length | 259 mm |
| Width | 60 mm |
| Thickness | 90 mm |
| Spanner Size | 22 |
| Paired article numbers | 36586 |
| Internal Thread Size | M14 x 1,5 |
| Extra Description | ProKit |
| Type | Tie Rod End |
Additional Information
Technical Information
If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | 51999641 |
| Function | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Left |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 19.5 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Additional Information 2 | with brake caliper screws, with fastening material |
| Wear Warning Contact | with acoustic wear warning |
| Placement on Vehicle | Front Axle |
| Length | 150.9 mm |
| Width | 57.2 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle, Upper |
| Material | Rubber/Metal |
| Outer diameter | 114 mm |
| Function | Repair Kit, suspension strut support mount |
| Type | Repair Kit, suspension strut support mount |
| Height | 49 mm |
| Additional Information 2 | with ball bearing |
| Inner diameter | 14 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Internal Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle Left |
| Length | 224 mm |
| Thickness | 85 mm |
| Spanner Size | 21, 22 |
| Paired article numbers | 44214 |
| Type | Tie Rod End |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Additional Information | with counter nut |
Additional Information
Technical Information
If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (44211)
- 1x Febi Nut (21557)
- 1x Febi Nut (01010)
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Internal Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle Right |
| Length | 224 mm |
| Thickness | 85 mm |
| Spanner Size | 21, 22 |
| Paired article numbers | 44212 |
| Type | Tie Rod End |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Additional Information | with counter nut |
Additional Information
Technical Information
If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (44213)
- 1x Febi Nut (21557)
- 1x Febi Nut (01010)
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Tie Rod |
| External Thread Size | M12 x 1,25 |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (12025)
- 1x Febi Tie Rod End (11281)
Important compatibility info
| Additional Information | with lock nut |
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 30065 |
| Type | Tie Rod |
| Function | Tie Rod |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (22620)
- 1x Febi Tie Rod End (22615)
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | 30066 |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (22620)
- 1x Febi Tie Rod End (22614)
Important compatibility info
| Cable Length | 240 mm |
| Number of circuits | 4 |
| Type | Cable Repair Set, thermostat |
| Function | Cable Repair Set, thermostat |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with anti-squeak plate, with fastening material |
| Placement on Vehicle | Front Axle |
| Length | 131.9 mm |
| Width | 59.7 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 17.8 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 122.4 mm |
| Width | 56.1 mm. 59.8 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 15.4 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Wear Warning Contact | prepared for wear warning indicator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with piston clip |
| Placement on Vehicle | Front Axle |
| Length | 155.2 mm |
| Width | 59.2 mm. 64.4 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 17.9 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | febi Plus |
| Function | Splash Guard, brake disc |
| Type | Splash Guard, brake disc |
| Placement on Vehicle | Rear Axle Left |
| Paired article numbers | 175353 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 48.8 mm |
| Placement on Vehicle | Front Axle |
| Length | 122.2 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 16.8 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with bush |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 2760 mm |
| Number of Connectors / Ports | 2 |
| Resistance | 1150 Ohm |
| Cable Length | 2385 mm |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, transmission sided, Wheel Side |
| Length | 100 mm |
| Material | Thermoplastic polyester elastomer |
| Inner diameter 1 | 25 mm |
| Inner diameter 2 | 67 mm |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
| Joint Type | Tripod Joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (186187)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 418 mm |
| Housing Diameter | 22 mm |
| Eject Force | 490 N |
| Stroke | 163 mm |
| Mounting points diameter | 18 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 230 mm |
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Bearing Type | Tapered Roller Bearing |
| Function | Wheel Bearing |
| Inner diameter | 55 mm |
| Outer diameter | 90 mm |
| Width | 27 mm |
| Type | Wheel Bearing |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Bearing Code | 33011 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Wire Diameter | 13.5 mm |
| Placement on Vehicle | Front Axle |
| Length | 220 mm |
| Outer diameter | 172 mm |
| Function | Suspension Spring |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Fuel filter |
| Filter type | Spin-on Filter, with water drain screw |
| Outer diameter | 80 mm |
| Inner diameter | 18 mm |
| Height | 147 mm |
| Function | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | febi Plus |
| Function | Washer Fluid Jet, headlight cleaning |
| Type | Washer Fluid Jet, headlight cleaning |
| Paired article numbers | 175651 |
| Placement on Vehicle | Right |
| Additional Information | with lift cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 70 mm |
| Additional Information 2 | with crown nut |
| Thread Size | M18 x 1,5 |
| Cone Size | 22.2 mm |
| Type | Tie Rod End |
| Function | Tie Rod End |
| Extra Description | ProKit |
| External Thread Size | M20 x 1,5 |
| Thread Type | with left-hand thread |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with lift cylinder |
| Extra Description | febi Plus |
| Function | Washer Fluid Jet, headlight cleaning |
| Type | Washer Fluid Jet, headlight cleaning |
| Paired article numbers | 175652 |
| Placement on Vehicle | Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023
















































