Important compatibility info
| Additional Information | with rubber-metal mounts |
| Material | Sheet Steel |
| Inner diameter | 14 mm |
| Placement on Vehicle | Upper, Rear, Rear Axle Left, Rear Axle Right |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Brake Pad Set, disc brake |
| Thickness/Strength 1 | 14.8 mm |
| Inspection Tag | ECE R90 Approved |
| Wear Warning Contact | with acoustic wear warning |
| Length | 131.8 mm |
| Placement on Vehicle | Front Axle |
| Width | 77.3 mm |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle, transmission sided |
| Material | Thermoplastic polyester elastomer |
| Inner diameter 1 | 30 mm |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
| Length | 117 mm |
| Inner diameter 2 | 82 mm |
| Joint Type | Tripod Joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (172855)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 165 mm |
| Additional Information 2 | with crown nut |
| Spanner Size | 21 |
| Paired article numbers | 197419 |
| Type | Tie Rod End |
| Function | Tie Rod End |
| External Thread Size | M12 x 1,25 |
| Internal Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | PTFE (polytetrafluoroethylene) |
| Placement on Vehicle | transmission sided |
| Inner diameter | 80 mm |
| Function | Shaft Seal, crankshaft |
| Type | Shaft Seal, crankshaft |
| Additional Information 2 | with flange |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 149 mm |
| Function | Tie Rod End |
| External Thread Size | M30 x 1,5 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information 2 | with crown nut |
| Thread Type | with right-hand thread |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Equalising reservoir, hydraulic oil (power steering) |
| Function | Equalising reservoir, hydraulic oil (power steering) |
| Extra Description | febi Plus |
| Additional Information 2 | without cap |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 313 mm |
| Housing Diameter | 19 mm |
| Eject Force | 640 N |
| Stroke | 95 mm |
| Mounting points diameter | 15 mm |
| Piston conrod diameter | 10 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 194 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Injector, urea injection |
| Function | Injector, urea injection |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 169.2 mm |
| Width | 73.1 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 20.3 mm |
| Function | Brake Pad Set, disc brake |
| Additional Information 2 | with fastening material |
| Type | Brake Pad Set, disc brake |
| Wear Warning Contact | prepared for wear warning indicator |
| Model | CRAFTER SPRINTER |
| Manufacturer | MERCEDES VOLKSWAGEN |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 67 mm |
| Opening Temperature | 83 °C |
| Function | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Type | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 456 mm |
| Housing Diameter | 18 mm |
| Eject Force | 185 N |
| Housing length | 251 mm |
| Mounting points diameter | 16.5 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, bonnet |
| Stroke | 182 mm |
| Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 117 mm |
| Placement on Vehicle | Front Axle |
| Thread Type | with right-hand thread |
| Cone Size | 25 mm |
| Pipe Diameter | 53 mm |
| Extra Description | ProKit |
| External Thread Size | M20 x 1,5, M30 x 1,5 RHT |
| Type | Angled Ball Joint, steering push rod / Tie Rod End |
| Function | Angled Ball Joint, steering push rod / Tie Rod End |
| Replaces | 26006 |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 407 mm |
| Outer diameter | 208 mm |
| Inner diameter | 120 mm |
| Filter type | Filter Insert |
| Function | Air Filter |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thickness/Strength 1 | 15.8 mm |
| Placement on Vehicle | Front Axle |
| Length | 141.7 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Width | 61.1 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Fitting Depth | 18 mm |
| Glow Plug Type | after-glow capable |
| Type | Glow Plug |
| Function | Glow Plug |
| External Thread Size | M12 x 1,25 |
| Length | 64 mm |
| Voltage | 11 V |
| Spanner Size | 12 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Dust Cover Kit, shock absorber |
| Placement on Vehicle | Rear Axle |
| Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Bushing, axle beam |
| Placement on Vehicle | Rear |
| Material | Rubber/Metal |
| Function | Bushing, axle beam |
| Thickness | 81 mm |
| Outer diameter | 69 mm |
| Inner diameter | 13.9 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Repair Kit, suspension strut support mount |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Repair Kit, suspension strut support mount |
| Material | Rubber/Metal |
| Additional Information 2 | without ball bearing, with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (31475)
- 4x Febi Screw (194491)
- 1x Febi Nut (10893)
Important compatibility info
| Inner diameter | 37 mm |
| Inner diameter 1 | 32 mm |
| Cooling Hose | from engine to engine cooler |
| Function | Radiator Hose |
| Type | Radiator Hose |
| Hose Length | 420 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Weight | 0.965 kg |
| Outer diameter | 18.0 mm |
| Function | Heat Exchanger, interior heating |
| Type | Heat Exchanger, interior heating |
Important compatibility info
| Height | 95 mm |
| Outer diameter | 102 mm |
| Function | Fuel filter |
| Type | Fuel filter |
| Filter type | Filter Insert |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 4 |
| Type | Sensor, intake manifold pressure |
| Function | Sensor, intake manifold pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, rear window |
| Stroke | 220 mm |
| Housing Diameter | 18 mm |
| Placement on Vehicle | both sides |
| Mounting points diameter | 16.5 mm |
| Housing length | 297.5 mm |
| Length | 543 mm |
| Function | Gas Spring, rear window |
| Eject Force | 200 N |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Brake Pad Set, disc brake |
| Thickness/Strength 1 | 17 mm |
| Length | 128.4 mm |
| Width | 59.2 mm |
| Placement on Vehicle | Rear Axle |
| Inspection Tag | ECE R90 Approved |
| Wear Warning Contact | incl. wear warning contact |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Mounting, control/trailing arm |
| Placement on Vehicle | Front Axle Left, Front, Rear, Front Axle Right |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Mounting, control/trailing arm (22865)
- 2x Febi Mounting, control/trailing arm (22866)
Important compatibility info
| Material | Plastic |
| Number of Connectors / Ports | 3 |
| Function | Sensor, exhaust pressure |
| Sensor Type | Differential Pressure Sensor |
| Type | Sensor, exhaust pressure |
| for OE number | 03L 906 051 D |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Seal Ring, wheel hub |
| Type | Seal Ring, wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with retaining spring holder |
| Placement on Vehicle | Rear Axle |
| Length | 99.8 mm |
| Width | 41.1 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 14.9 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Additional Information 2 | with anti-squeak plate, with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with nuts |
| Placement on Vehicle | Front Axle Left, Rear, Front Axle Right |
| Length | 70 mm |
| Material | Rubber/Metal |
| Outer diameter | 70 mm |
| Additional Information 2 | with bolts/screws |
| Inner diameter | 16.3 mm |
| Type | Mounting, control/trailing arm |
| Function | Mounting, control/trailing arm |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (109359)
- 2x Febi Fastening Bolt, control arm (173439)
- 2x Febi Nut (174234)
- 1x Febi Nut (175150)
Important compatibility info
| Material | ACM (Polyacrylate) |
| Paired article numbers | 179723 |
| Type | Gasket, cylinder head cover |
| Function | Gasket, cylinder head cover |
| Placement on Vehicle | Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Gasket, cylinder head cover |
| Paired article numbers | 179722 |
| Function | Gasket, cylinder head cover |
| Material | ACM (Polyacrylate) |
| Placement on Vehicle | Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Air Filter |
| Outer diameter | 154 mm |
| Height | 390 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Inner diameter | 88 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 12 V |
| Operating Mode | Electric-pneumatic |
| Number of Connectors / Ports | 1 |
| Type | Boost Pressure Control Valve |
| Function | Boost Pressure Control Valve |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 27 mm |
| Number of Teeth | 123 |
| Function | Timing Belt |
| Belts | with rounded tooth profile |
| Type | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Air Filter |
| Type | Air Filter |
| Filter type | Filter Insert |
| Width | 148 mm |
| Height | 77 mm |
| Length | 366 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 158 mm |
| Outer diameter | 95 mm |
| Filter type | In-Line Filter, with water drain screw, with connection for water sensor |
| Function | Fuel filter |
| Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Width | 42 mm |
| Outer diameter | 230 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 5 mm |
| Type | Brake Shoe Set |
| Function | Brake Shoe Set |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Mounting, engine |
| Type | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Lower, Rear |
| Paired article numbers | 193833 |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Holder, engine mounting system |
| Function | Holder, engine mounting system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Internal Thread Size | M16 x 1,5 |
| External Thread Size | M12 x 1,5 |
| Placement on Vehicle | Front Axle Right |
| Length | 220 mm |
| Material | Steel |
| Paired article numbers | 11814 |
| Colour | Black |
| Thread Type | with right-hand thread |
| Function | Tie Rod End |
| Additional Information | with lock nut |
| Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 146.5 mm |
| Width | 59.5 mm |
| Wear Warning Contact | incl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 18.5 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | febi Plus |
| Function | Washer Fluid Jet, headlight cleaning |
| Type | Washer Fluid Jet, headlight cleaning |
| Paired article numbers | 176573 |
| Placement on Vehicle | Right |
| Additional Information | with lift cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 56.5 mm |
| Additional Information | with retaining spring holder, with spring |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 18.1 mm |
| Length | 132.6 mm |
| Type | Brake Pad Set, disc brake |
| Placement on Vehicle | Front Axle |
| Function | Brake Pad Set, disc brake |
| Additional Information 2 | with brake caliper screws, with anti-squeak plate, with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 123.1 mm |
| Width | 59.2 mm |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 17 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Replaces | 16549 |
| Additional Information 2 | with piston clip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Material | Rubber/Metal |
| Additional Information 2 | with ball bearing |
| Type | Repair Kit, suspension strut support mount |
| Function | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (22157)
- 1x Febi Rolling Bearing, suspension strut support mount (17157)
Important compatibility info
| Function | Sealing Cap, tank unit (Urea injection) |
| Outer diameter | 40 mm |
| Colour | Blue |
| Type | Sealing Cap, tank unit (Urea injection) |
| Lock System | with lock, with two keys |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | febi Plus |
| Function | Washer Fluid Jet, headlight cleaning |
| Type | Washer Fluid Jet, headlight cleaning |
| Paired article numbers | 176567 |
| Placement on Vehicle | Left |
| Additional Information | with lift cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023















































