Important compatibility info
| Number of Teeth | 92 |
| Width | 19 mm |
| Function | Timing Belt |
| Type | Timing Belt |
Important compatibility info
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Width | 21.36 mm |
| Number of Ribs | 6 |
| Colour | Black |
| Length | 1810 mm |
Important compatibility info
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Width | 21.36 mm |
| Number of Ribs | 6 |
| Colour | Black |
| Length | 1810 mm |
Important compatibility info
Important compatibility info
Important compatibility info
| Function | Link/Coupling Rod, stabiliser bar |
| Thread Size | M10x1.2 |
| Placement on Vehicle | Front Axle Right |
| Rod/Strut | Coupling Rod |
| Length | 109 mm |
| Type | Link/Coupling Rod, stabiliser bar |
| Model | MAXUS |
| Manufacturer | LDV |
| Paired article numbers | AST4354 |
Important compatibility info
| Function | Link/Coupling Rod, stabiliser bar |
| Thread Size | M10x1.2 |
| Placement on Vehicle | Front Axle Right |
| Rod/Strut | Coupling Rod |
| Length | 109 mm |
| Type | Link/Coupling Rod, stabiliser bar |
| Model | MAXUS |
| Manufacturer | LDV |
| Paired article numbers | AST4354 |
Important compatibility info
| Type | Accessory Kit, disc brake pad |
| Function | Accessory Kit, disc brake pad |
| Placement on Vehicle | Rear Axle |
Important compatibility info
| Type | Accessory Kit, disc brake pad |
| Function | Accessory Kit, disc brake pad |
| Placement on Vehicle | Rear Axle |
Important compatibility info
| Title | PCF7935 Blank Transponder Chip |
Additional Information
- They can either be built onto the PCB (On-Board) or housed separately in the key (Off-Board).
- Transponder chips are the part of the key that connect with the immobiliser and are often either carbon or glass.
- Reference: PCF7935
- Transponder Type: Carbon
- Transponder chips work by forming a ‘handshake’ between the vehicle key and the vehicle itself via an aerial near the ignition barrel.
- Programming: Diagnostically or EEPROM
Important compatibility info
| Title | Nissan/Ford/LDV PCF7935 ID41 T11 Transponder Chip |
Additional Information
- They can either be built onto the PCB (On-Board) or housed separately in the key (Off-Board).
- Transponder chips are the part of the key that connect with the immobiliser and are often either carbon or glass.
- Programming: Diagnstically or EEPROM
- Reference: PCF7935 ID41 T11
- Transponder Type: Carbon
- Transponder chips work by forming a ‘handshake’ between the vehicle key and the vehicle itself via an aerial near the ignition barrel.
Important compatibility info
| Title | Seat/Volkswagen/Ford PCF7935 ID42 T10 Transponder Chip |
Additional Information
- They can either be built onto the PCB (On-Board) or housed separately in the key (Off-Board).
- Transponder chips are the part of the key that connect with the immobiliser and are often either carbon or glass.
- Programming: Diagnostically or EEPROM
- Reference: PCF7935 ID42 T10
- Transponder Type: Carbon
- Transponder chips work by forming a ‘handshake’ between the vehicle key and the vehicle itself via an aerial near the ignition barrel.
Important compatibility info
| Title | Citroen/Peugoet/Fiat PCF7935 ID33 Transponder Chip (Valeo) |
Additional Information
- They can either be built onto the PCB (On-Board) or housed separately in the key (Off-Board).
- This chip is suitable for vehicles with Valeo systems.
- Transponder chips are the part of the key that connect with the immobiliser and are often either carbon or glass.
- Programming: Diagnostically or EEPROM
- Reference: PCF7935 ID33
- Transponder Type: Carbon
- Transponder chips work by forming a ‘handshake’ between the vehicle key and the vehicle itself via an aerial near the ignition barrel.
Important compatibility info
| Title | Fiat PCF7935 ID33 Transponder Chip (Bosch) |
Additional Information
- They can either be built onto the PCB (On-Board) or housed separately in the key (Off-Board).
- This chip is suitable for vehicles with Bosch systems.
- Transponder chips are the part of the key that connect with the immobiliser and are often either carbon or glass.
- Programming: Diagnostically or EEPROM
- Reference: PCF7935 ID33
- Transponder Type: Carbon
- Transponder chips work by forming a ‘handshake’ between the vehicle key and the vehicle itself via an aerial near the ignition barrel.
Important compatibility info
| Title | Vauxhall/Opel PCF7935 ID33 Transponder Chip |
Additional Information
- They can either be built onto the PCB (On-Board) or housed separately in the key (Off-Board).
- Transponder chips are the part of the key that connect with the immobiliser and are often either carbon or glass.
- Programming: Diagnostically or EEPROM
- Reference: PCF7935 ID33
- Transponder Type: Carbon
- Transponder chips work by forming a ‘handshake’ between the vehicle key and the vehicle itself via an aerial near the ignition barrel.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 39 mm |
| Outer diameter | 68 mm |
| Additional Information 2 | with retaining ring, with shaft seal |
| Inner diameter | 35 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Replaces | ADN18235 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 39 mm |
| Outer diameter | 68 mm |
| Additional Information 2 | with retaining ring, with shaft seal |
| Inner diameter | 35 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Replaces | ADN18235 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Timing Belt |
| Belts | with trapezoidal tooth profile |
| Number of Teeth | 97 |
| Width | 19 mm |
| Type | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Timing Belt |
| Belts | with trapezoidal tooth profile |
| Number of Teeth | 97 |
| Width | 19 mm |
| Type | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front |
| Type | Mounting Kit, soot/particulate filter |
| Function | Mounting Kit, soot/particulate filter |
| To be used with part number(s) | BM11635H |
Important compatibility info
| Placement on Vehicle | Front |
| Type | Mounting Kit, soot/particulate filter |
| Function | Mounting Kit, soot/particulate filter |
| To be used with part number(s) | BM11635H |
Important compatibility info
Important compatibility info
Important compatibility info
| To be used with part number(s) | BM70334 |
| Function | Mounting Kit, exhaust pipe |
| Type | Mounting Kit, exhaust pipe |
| Placement on Vehicle | Front |
Important compatibility info
| To be used with part number(s) | BM70334 |
| Function | Mounting Kit, exhaust pipe |
| Type | Mounting Kit, exhaust pipe |
| Placement on Vehicle | Front |
Important compatibility info
| Function | Mounting Kit, catalytic converter |
| To be used with part number(s) | BM91128H |
| Type | Mounting Kit, catalytic converter |
Important compatibility info
| Function | Mounting Kit, catalytic converter |
| To be used with part number(s) | BM91128H |
| Type | Mounting Kit, catalytic converter |
Important compatibility info
| Number of Rivet Holes | 3 |
| Version | Fitting Kit |
| Thread Measurement 1 | M12x1.25 |
| Thread Size | M14x1.5 |
| Bore Diameter 1 | 15.1 mm |
| Bore Diameter 2 | 18.1 mm |
| Function | Ball Joint |
| Number of mounting bores | 3 |
| Mounting Type | Bolted |
| Type | Ball Joint |
| Steering arm type | for control arm |
Important compatibility info
| Number of Rivet Holes | 3 |
| Version | Fitting Kit |
| Thread Measurement 1 | M12x1.25 |
| Thread Size | M14x1.5 |
| Bore Diameter 1 | 15.1 mm |
| Bore Diameter 2 | 18.1 mm |
| Function | Ball Joint |
| Number of mounting bores | 3 |
| Mounting Type | Bolted |
| Type | Ball Joint |
| Steering arm type | for control arm |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Width | 32 mm |
| Function | Brake Shoe Set |
| Inner Brake Drum Diameter | 180 mm |
| Type | Brake Shoe Set |
| Placement on Vehicle | Rear Axle |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023


















