Proud to be a UK-based company
Contact us
Important compatibility info
| External Thread Size | M10 x 1,5 |
| Placement on Vehicle | Lower, Rear |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, automatic transmission |
| Function | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.71
Important compatibility info
| Function | Air Filter |
| Filter type | Filter Insert |
| Length | 253 mm |
| Height | 232 mm |
| Width | 126 mm |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.72
Important compatibility info
| Number of Connectors / Ports | 2 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Additional Information | with bush |
| Cable Length | 3110 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
| Resistance | 1185 Ohm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.72
Important compatibility info
| Type | Tie Rod |
| External Thread Size | M12 x 1,5, M16 x 1,5 |
| Placement on Vehicle | Front Axle Left |
| Additional Information | with lock nut |
| Paired article numbers | 186559 |
| Function | Tie Rod |
Additional Information
Technical Information
After replacement, the optical driver assistance systems (cameras, radar, etc.) may need to be recalibrated. Please observe the manufacturer's instructions.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (184022)
- 1x Febi Inner Tie Rod (185895)
£28.72
Important compatibility info
| Placement on Vehicle | Front Axle, Rear Axle |
| Length | 130 mm. 120 mm |
| Material | Rubber |
| Outer diameter | 66 mm |
| Inner diameter | 23 mm |
| Function | Rubber Buffer, suspension |
| Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.72
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 643 mm |
| Housing Diameter | 18 mm |
| Eject Force | 475 N |
| Stroke | 204 mm |
| Mounting points diameter | 16.5 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 375 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.73
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 156.4 mm |
| Width | 78.7 mm |
| Wear Warning Contact | incl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 18.5 mm. 19.3 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Additional Information 2 | with piston clip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.73
Important compatibility info
| Function | Gas Spring, boot/cargo area |
| Eject Force | 490 N |
| Stroke | 182 mm |
| Piston conrod diameter | 10 mm |
| Type | Gas Spring, boot/cargo area |
| Housing Diameter | 22 mm |
| Placement on Vehicle | both sides |
| Length | 513 mm |
| Housing length | 304 mm |
| Mounting points diameter | 18 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.73
Important compatibility info
| Length | 144 mm |
| Wear Warning Contact | prepared for wear warning indicator |
| Function | Brake Pad Set, disc brake |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 19.5 mm |
| Width | 70 mm. 60.2 mm |
| Placement on Vehicle | Front Axle |
| Type | Brake Pad Set, disc brake |
| Additional Information 2 | with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.73
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 80 mm |
| Inner diameter | 45 mm |
| Bearing Type | Tapered Roller Bearing |
| Function | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Type | Wheel Bearing Kit |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.73
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 157.7 mm |
| Width | 60.2 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 18.7 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Additional Information 2 | with anti-squeak plate, with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.73
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 155.2 mm |
| Width | 68.8 mm. 71.4 mm |
| Wear Warning Contact | incl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 19.4 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Additional Information 2 | with piston clip, with anti-squeak plate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.73
Important compatibility info
| Material | Plastic |
| Opening Temperature | 89 °C |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.73
Important compatibility info
| Placement on Vehicle | Front Axle |
| Thickness | 41 mm |
| Brake Disc Thickness | 12 mm |
| Minimum thickness | 10.5 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 61 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Function | Brake Disc |
| Rim Hole Number | 4 -Hole |
| Rotor Style | Solid |
| Type | Brake Disc Rotor |
| Outer diameter | 238 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.74
Important compatibility info
| Inner diameter | 45 mm |
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension, propshaft (18822)
- 1x Febi Bearing, propshaft centre bearing (18824)
£28.74
Important compatibility info
| Additional Information 2 | with bolts/screws |
| Placement on Vehicle | Front Axle |
| Length | 146 mm |
| Width | 71.6 mm |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 20.5 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.74
Important compatibility info
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | 108899 |
| Cone Size | 18 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.74
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 108898 |
| Cone Size | 18 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.74
Important compatibility info
| Material | Metal |
| Outer diameter | 74 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Width of castor bearing surface | 38 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.74
Important compatibility info
| Placement on Vehicle | Rear, Lower |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.74
Important compatibility info
| Internal Thread Size | M30 x 1,5 |
| Placement on Vehicle | Front Axle, Rear Axle |
| Length | 120 mm |
| Outer diameter | 40 mm |
| Thread Type | with right-hand thread |
| Cone Size | 32 mm |
| Extra Description | ProKit |
| External Thread Size | M27 x 1,5 |
| Additional Information | with sleeve, with lock nut |
| Type | Angled Ball Joint, steering push rod / Tie Rod End |
| Function | Angled Ball Joint, steering push rod / Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bolt, wheel alignment (43446)
- 1x Febi Tie Rod End (27481)
- 1x Febi Nut (26529)
£28.75
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 371 mm |
| Function | Brake Hose |
| Internal Thread Size | M10 x 1, M12 x 1 |
| Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.75
Important compatibility info
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
| for OE number | 500378462 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.75
Important compatibility info
| Material | Metal |
| Outer diameter | 70 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Width of castor bearing surface | 23 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| for OE number | 11 28 2 244 754 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.75
Important compatibility info
| Pipe Diameter | 51 mm. 41 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 20 mm |
| Placement on Vehicle | Rear |
| Function | Shock Absorber, driver cab suspension |
| Max. Length | 257 mm |
| Min. Length | 236 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Operating Mode | Mechanical |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.76
Important compatibility info
| Material | Rubber/Metal, Cast Aluminium |
| Placement on Vehicle | Rear |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.76
Important compatibility info
| Placement on Vehicle | Front |
| Material | Rubber/Metal |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 1H0 199 609 E |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.77
Important compatibility info
| Housing material | Cast Aluminium |
| Number of Wings | 14 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Paper |
| Type | Water Pump, engine cooling |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.77
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Function | Bushing, axle beam |
| Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.77
Important compatibility info
| Tensile Cord Material | Aramid |
| Function | V-Ribbed Belt |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Alternator type | for starter generator |
| Type | V-Ribbed Belt |
| Number of Ribs | 6 |
| Length | 2220 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.77
Important compatibility info
| Material | Sheet Steel |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 182033 |
| Steering arm type | Control Arm |
| Additional Information 2 | with bearing |
| Placement on Vehicle | Rear Axle Left, Lower, Front |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.77
Important compatibility info
| Function | Joint Kit, drive shaft |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| Thread Size | M16x1,5 |
| External Teeth, Wheel Side | 42 |
| Internal Teeth, wheel side | 33 |
| Type | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.77
Important compatibility info
| Length | 202 mm |
| Inner diameter | 50 mm |
| Bearing Type | Ball Bearing |
| Type | Suspension, propshaft |
| Function | Suspension, propshaft |
| Additional Information 2 | with ball bearing |
| Hole Spacing | 182 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension, propshaft (171932)
- 1x Febi Bearing, propshaft centre bearing (05362)
£28.78
Important compatibility info
| Function | Dust Cover Kit, shock absorber |
| Type | Dust Cover Kit, shock absorber |
| Width | 113 mm |
| Length | 170 mm |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Protective Cap/Bellow, shock absorber (175539)
- 2x Febi Rubber Buffer, suspension (109589)
£28.78
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Material | Steel |
| Outer diameter | 191 mm |
| Inner diameter | 187 mm |
| Number of Teeth, ABS ring | 100 |
| Type | Sensor Ring, ABS |
| Function | Sensor Ring, ABS |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.78
Important compatibility info
| for OE number | 51810285 |
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.78
Important compatibility info
| Placement on Vehicle | Front Axle Right, Upper, Rear |
| Steering arm type | Control Arm |
| Paired article numbers | 36602 |
| Material | Aluminium |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, with rubber mount |
| Cone Size | 16 mm |
| Cone Size 1 | 13 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.79
Important compatibility info
| Placement on Vehicle | Front Axle Left, Upper, Rear |
| Steering arm type | Control Arm |
| Paired article numbers | 36603 |
| Material | Aluminium |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 16 mm |
| Cone Size 1 | 13 mm |
| Additional Information 2 | with ball joint, with rubber mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.79
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 154.7 mm. 155.2 mm |
| Width | 63.4 mm |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 18.2 mm. 19.1 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Additional Information 2 | with piston clip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.79
Important compatibility info
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle |
| Outer diameter | 127 mm |
| Function | Repair Kit, suspension strut support mount |
| Type | Repair Kit, suspension strut support mount |
| Height | 51 mm |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.79
Important compatibility info
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Material | Rubber/Metal |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.79
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 239 mm |
| Thickness | 35.1 mm |
| Brake Disc Thickness | 12 mm |
| Minimum thickness | 10 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 65 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rotor Style | Solid |
| Rim Hole Number | 4 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.80
Important compatibility info
| Placement on Vehicle | Left |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.80
Important compatibility info
| Placement on Vehicle | Left Front |
| Material | Rubber/Metal |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.80
Important compatibility info
| Paired article numbers | 104542 |
| Number of Connectors / Ports | 2 |
| Resistance | 1150 Ohm |
| Length | 3665 mm |
| Cable Length | 3585 mm |
| Placement on Vehicle | Rear Axle Left |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.80
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 238 mm |
| Thickness | 41 mm |
| Brake Disc Thickness | 17 mm |
| Minimum thickness | 15 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 61 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rotor Style | internally vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.80
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 1075 mm |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.80
Important compatibility info
| Width | 29 mm |
| Outer diameter | 130 mm |
| Inner diameter | 85 mm |
| Bearing Type | Tapered Roller Bearing |
| Placement on Vehicle | Rear Axle |
| Type | Bearing / Wheel Bearing |
| Function | Bearing / Wheel Bearing |
| Bearing Code | 32017XA |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.81
Important compatibility info
| Housing material | Cast Aluminium |
| Additional Information | with gasket/seal |
| Number of Wings | 7 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Seal Material | Rubber |
| Water pump impeller material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.82
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 310 mm |
| Outer diameter | 137 mm |
| Function | Suspension Spring |
| Type | Suspension Spring |
| Number of Coils | 8.3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.83
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023