Important compatibility info
| Inner diameter | 26 mm |
| Thickness | 47 mm |
| Material | Rubber |
| Width | 44 mm |
| Length | 47 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Mounting, stabiliser bar |
| Function | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 42 mm |
| Material | Rubber |
| Thickness | 47 mm |
| Inner diameter | 21 mm |
| Type | Mounting, stabiliser bar |
| Function | Mounting, stabiliser bar |
| Length | 48 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 38.5 mm |
| Width | 41 mm |
| Material | Polyester, EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Thickness | 41 mm |
| Inner diameter | 22.5 mm |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | transmission sided, Front Axle Left, Front Axle Right |
| Length | 88 mm |
| Material | Rubber |
| Inner diameter 1 | 29 mm |
| Inner diameter 2 | 68 mm |
| Function | Bellow, drive shaft |
| Type | Bellow, drive shaft |
| Joint Type | Tripod Joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Repair Kit, automatic clutch adjustment |
| Type | Repair Kit, automatic clutch adjustment |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Gasket, cylinder head cover |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Gasket, automatic transmission oil sump |
| Material | Rubber |
| Type | Gasket, automatic transmission oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Internal Thread Size | 3/4" - 16 UNF |
| Outer diameter 1 | 79 mm |
| Outer diameter 2 | 76 mm |
| Height | 121 mm |
| Filter type | Spin-on Filter |
| Type | Oil Filter |
| Function | Oil Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front |
| Function | Clamping Bolt Set, ball joint |
| Type | Clamping Bolt Set, ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Bolt, control arm (24385)
- 2x Febi Nut, ball joint (24383)
Important compatibility info
| Height | 80 mm |
| Material | Paper |
| Outer diameter | 72 mm |
| Inner diameter | 32 mm |
| Filter type | Filter Insert |
| Seal Diameter | 84.5 mm |
| Function | Oil Filter |
| Type | Oil Filter |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Fabric |
| Width | 15 mm |
| Colour | Black |
| Length | 15 m |
| Function | Cable Protection Tape |
| Extra Description | febi Plus |
| Type | Cable Protection Tape |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Retaining Clip, windows |
| Function | Retaining Clip, windows |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Pedal Pad, clutch pedal |
| Function | Pedal Pad, clutch pedal |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Steel |
| Height | 21 mm |
| Spanner Size | 30 |
| Placement on Vehicle | Rear Axle |
| Function | Nut, kingpin |
| Internal Thread Size | M20 x 1,5 |
| Outer diameter | 45 mm |
| Type | Nut, kingpin |
| Bolt Head/Nut Design | External Hexagon |
| Surface | Zink-nickel coated |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 285 mm |
| Height | 41 mm |
| Width | 184 mm |
| Filter type | Filter Insert |
| Function | Air Filter |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 265 mm |
| Function | Filter, cabin air |
| Filter type | Activated Carbon Filter |
| Width | 218 mm |
| Height | 21 mm |
| Type | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Mounting, radiator |
| Extra Description | febi Plus |
| Type | Mounting, radiator |
| Colour | Black |
| for OE number | 5Q0 121 367 F |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 90 mm |
| Placement on Vehicle | Front Axle |
| Material | PU (Polyurethane) |
| Function | Rubber Buffer, suspension |
| Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Mounting, control/trailing arm |
| Outer diameter | 44 mm. 37 mm |
| Thickness | 55 mm |
| Inner diameter | 12 mm |
| Placement on Vehicle | Lower Front Axle, Front |
| Material | Rubber/Metal |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | NBR (nitrile butadiene rubber) |
| Function | Gasket, cylinder head cover |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 165 mm |
| Function | Brake Hose |
| Type | Brake Hose |
| Replaces | 23166 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | PU (Polyurethane) |
| Function | Rubber Buffer, suspension |
| Inner diameter | 22 mm |
| Thickness | 80 mm |
| Outer diameter | 64 mm |
| Placement on Vehicle | Front Axle |
| Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 82 mm |
| Outer diameter | 33 mm |
| Inner diameter | 16 mm |
| Function | Bush, driver cab suspension |
| Type | Bush, driver cab suspension |
| Material | Rubber/Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Gasket, manual transmission housing |
| Outer diameter | 32 mm |
| Thickness | 8.2 mm |
| Inner diameter | 22 mm |
| Colour | Brown |
| Type | Gasket, manual transmission housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Number of Connectors / Ports | 2 |
| Brake Type | Disc Brake |
| Cable Length | 274 mm |
| Type | Warning Contact, brake pad wear |
| Function | Warning Contact, brake pad wear |
| for OE number | 4G0 615 121 D |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 105 mm |
| Material | Metal |
| Rod/Strut | Coupling Rod |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thickness | 30 mm |
| Placement on Vehicle | Rear Axle, Rear |
| Material | Rubber/Metal |
| Outer diameter | 47 mm |
| Inner diameter | 14 mm |
| Function | Mounting, differential |
| Type | Mounting, differential |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 36 mm |
| Outer diameter | 24.5 mm |
| Inner diameter | 12 mm |
| Thickness | 38 mm |
| Function | Mounting, control/trailing arm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Type | Mounting, control/trailing arm |
| Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Rubber |
| Function | Gasket, oil sump |
| Type | Gasket, oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | without pre-filter |
| Length | 345 mm |
| Height | 70 mm |
| Width | 136 mm |
| Filter type | Filter Insert |
| Function | Air Filter |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Bellow, drive shaft |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 98 mm |
| Material | Rubber |
| Inner diameter 1 | 23 mm |
| Inner diameter 2 | 56 mm |
| Type | Bellow, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Screw length below head | 110 mm |
| Function | Mounting and Bolting Kit, control/trailing arm |
| Quality/ Grade | 8.8 |
| Bolt Head/Nut Design | External Hexagon |
| Thread Length | 23 mm |
| Spanner Size | 16 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| External Thread Size | M10 x 1,5 |
| Type | Mounting and Bolting Kit, control/trailing arm |
| Steering arm type | Control Arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Screw (48825)
- 1x Febi Washer (39748)
- 1x Febi Nut (32615)
Important compatibility info
| Length | 136.25 mm |
| Function | Gasket, oil pump |
| Number of mounting bores | 4 |
| Material | Sheet Steel |
| Height | 0.51 mm |
| Width | 92 mm |
| Type | Gasket, oil pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 277 mm |
| Height | 40 mm |
| Width | 226 mm |
| Filter type | Pollen Filter |
| Type | Filter, cabin air |
| Function | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 46 mm |
| Width | 44 mm |
| Material | Rubber/Metal |
| Thickness | 46 mm |
| Inner diameter | 19.5 mm |
| Type | Mounting, stabiliser bar |
| Function | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Brake Hose |
| Placement on Vehicle | Rear Axle Left, inner, Rear Axle Right |
| External Thread Size | M10 x 1 |
| Length | 200 mm |
| Internal Thread Size | M10 x 1 |
| Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inner diameter | 22 mm |
| Filter type | Filter Insert |
| Function | Oil Filter |
| Type | Oil Filter |
| Gasket inner diameter | 72.8 mm |
| Additional Information 2 | with seal ring |
| Height | 115 mm |
| Gasket outer diameter | 79.8 mm |
| Outer diameter | 72 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle, Rear Axle |
| for OE number | BRK FITTING KIT 151 |
| Type | Accessory Kit, disc brake pad |
| Function | Accessory Kit, disc brake pad |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Valve Spring |
| Function | Valve Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 76 mm |
| Outer diameter | 77 mm |
| Filter type | Spin-on Filter |
| Seal Diameter | 71 mm |
| Function | Oil Filter |
| Internal Thread Size | M20 x 1,5 |
| Type | Oil Filter |
| Replaces | 39838 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 125 mm |
| Outer diameter | 64 mm |
| Filter type | Filter Insert |
| Function | Oil Filter |
| Inner diameter | 32 mm |
| Type | Oil Filter |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 120 mm |
| Outer diameter | 72 mm |
| Inner diameter | 20 mm |
| Filter type | Filter Insert |
| Seal Diameter | 77 mm |
| Type | Fuel filter |
| Function | Fuel filter |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 40.5 mm |
| Thickness | 31 mm |
| Spanner Size | 46 |
| Function | Centering Sleeve, propshaft |
| Type | Centering Sleeve, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Oil Filter |
| Type | Oil Filter |
| Filter type | Filter Insert |
| Outer diameter | 63 mm |
| Height | 103 mm |
| Material | Paper |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | frontal sided |
| Width | 7 mm |
| Outer diameter | 42 mm |
| Inner diameter | 25 mm |
| Function | Shaft Seal, camshaft |
| Type | Shaft Seal, camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 225 mm |
| Height | 30 mm |
| Filter type | Pollen Filter |
| Type | Filter Set, cabin air |
| Width | 112 mm |
| Function | Filter Set, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with clamp |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 130 mm |
| Material | Rubber |
| Inner diameter 1 | 9 mm |
| Inner diameter 2 | 40 mm |
| Type | Bellow Kit, steering |
| Function | Bellow Kit, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, steering (14083)
- 1x Febi Clamping Clip (38761)
Important compatibility info
| Function | Gasket, intake manifold |
| Type | Gasket, intake manifold |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thread Length | 4 mm |
| Type | Screw Plug, automatic transmission casing |
| Function | Screw Plug, automatic transmission casing |
| External Thread Size | M8 x 1 |
| Additional Information 2 | with seal ring |
| Length | 9.5 mm |
| Screw length below head | 7.5 mm |
| Bolt Head/Nut Design | Hexagon Socket |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Quality/ Grade | 8.8 |
| Type | Screw Plug, axle drive |
| Function | Screw Plug, axle drive |
| Screw length below head | 29 mm |
| Diameter 1 | 16 mm |
| Spanner Size | 8 |
| Bolt Head/Nut Design | Hexagon Socket |
| Surface | Zink flake coated |
| Material | Steel |
| External Thread Size | M10 x 1,5 |
| Additional Information | with gasket/seal |
| Length | 40 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































