Important compatibility info
| Length | 249.5 mm |
| Height | 99 mm |
| Width | 231 mm |
| Additional Information 2 | with oil sump gasket |
| Filter type | Screen Filter |
| Type | Hydraulic Filter Kit, automatic transmission |
| Function | Hydraulic Filter Kit, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rotor Style | Solid |
| Rim Hole Number | 4 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 260 mm |
| Thickness | 41 mm |
| Brake Disc Thickness | 12 mm |
| Minimum thickness | 10.6 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 61 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Charge Air Cooler, Left |
| Wall Thickness | 4.5 mm |
| Function | Charge Air Hose |
| Additional Information 2 | with clamps |
| Inner diameter | 70 mm |
| Type | Charge Air Hose |
| Turbocharger line | Charge air cooler to intake manifold |
| Material | AEM (Ethylene Acrylate Rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Charge Air Hose (103083)
- 1x Febi Fastening Clamp, charge air hose (39026)
Important compatibility info
| Paired article numbers | 107191 |
| Cable Length | 1046 mm |
| Number of Connectors / Ports | 2 |
| Resistance | 1600 Ohm |
| Placement on Vehicle | Front Axle Right |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left Rear |
| Length | 1726 mm |
| Paired article numbers | 178867 |
| Type | Cable Pull, parking brake |
| Function | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Teeth, Wheel Side | 28 |
| Internal Teeth, wheel side | 39 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
| Thread Size | M24x1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (171897)
- 1x Febi Split Pin (02877)
- 1x Febi Nut, kingpin (45450)
Important compatibility info
| Placement on Vehicle | engine sided |
| Width | 45 mm |
| Outer diameter | 72 mm |
| Inner diameter | 16 mm |
| Number of Ribs | 6 |
| Type | Alternator Freewheel Clutch |
| Function | Alternator Freewheel Clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with rubber mounts, with lock nut |
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 43067 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Length | 1545 mm |
| Paired article numbers | 171434 |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Parameter | 6PK |
| Width | 26 mm |
| Outer diameter | 153 mm |
| Inner diameter | 30 mm |
| Number of Ribs | 5 |
| Function | Belt Pulley, crankshaft |
| Replaces | 32254 |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rotor Style | Solid |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 272 mm |
| Thickness | 48 mm |
| Brake Disc Thickness | 10 mm |
| Minimum thickness | 8 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 65 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
| for OE number | 5Q0 615 601 D |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Steering arm type | Control Arm |
| Placement on Vehicle | Rear Axle |
| Length | 69.5 mm |
| Outer diameter | 35 mm. 30 mm |
| Inner diameter | 12 mm |
| Function | Mounting and Bolting Kit, control/trailing arm |
| for OE number | 33 32 9 058 822 |
| Type | Mounting and Bolting Kit, control/trailing arm |
Additional Information
Technical Information
Excentric type for track correction of vehicles with lowered suspension (non-factory).
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Mounting, control/trailing arm (04048)
Important compatibility info
| Material | Plastic |
| Voltage | 12 V |
| Colour | Black |
| Number of Connectors / Ports | 13 |
| Combi Switch Function | with indicator function, with high beam function |
| Function | Steering Column Switch |
| Type | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right, Rear |
| Length | 92 mm |
| Width | 58 mm |
| Thickness | 175 mm |
| Inner diameter | 14.3 mm. 69.8 mm |
| Paired article numbers | 44172 |
| Mounting points diameter | 10.4 mm |
| Function | Mounting, control/trailing arm |
| Extra Description | ProKit |
| Type | Mounting, control/trailing arm |
| Additional Information 2 | with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (40967)
- 1x Febi Bolt, control arm (43586)
- 2x Febi Nut (22263)
- 2x Febi Bolt, control arm (43585)
- 1x Febi Washer (21558)
- 1x Febi Bolt, control arm (40159)
Important compatibility info
| Placement on Vehicle | Front Axle Left, Rear |
| Function | Mounting, control/trailing arm |
| Length | 92 mm |
| Width | 58 mm |
| Thickness | 175 mm |
| Inner diameter | 14.3 mm. 69.8 mm |
| Paired article numbers | 44173 |
| Mounting points diameter | 10.4 mm |
| Extra Description | ProKit |
| Type | Mounting, control/trailing arm |
| Additional Information 2 | with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (40966)
- 1x Febi Bolt, control arm (43586)
- 2x Febi Nut (22263)
- 2x Febi Bolt, control arm (43585)
- 1x Febi Washer (21558)
- 1x Febi Bolt, control arm (40159)
Important compatibility info
| Voltage | 12 V |
| Number of Connectors / Ports | 2 |
| Pump Type | Mono Pump |
| Function | Washer Fluid Pump, window cleaning |
| Type | Washer Fluid Pump, window cleaning |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M14 x 1,5, M16 x 1,5 |
| Paired article numbers | 180795 |
| Internal Thread Size | M14 x 1,5 |
| Steering | with tie rod end |
| Function | Tie Rod |
| Placement on Vehicle | Front Axle Right |
| Type | Tie Rod |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (106408)
- 1x Febi Tie Rod End (180559)
Important compatibility info
| Opening Temperature | 87 °C |
| Additional Information | with gasket/seal |
| Housing Type | with housing |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | 037 906 283 C |
| Operating Mode | Electric-pneumatic |
| Number of Connectors / Ports | 2 |
| Valve type | Switch Valve |
| Type | Valve, air control (intake air) |
| Function | Valve, air control (intake air) |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, manual transmission |
| Function | Mounting, manual transmission |
| Placement on Vehicle | Rear, Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Gasket, cylinder head cover |
| Material | ACM (Polyacrylate) |
| Function | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Rear |
| for OE number | 98 117 866 80 |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | ACM (Polyacrylate) |
| Type | Gasket Set, cylinder head cover |
| Function | Gasket Set, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 4 |
| Function | Ignition Coil |
| Type | Ignition Coil |
| Replaces | 22040; 24106 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 137 mm |
| Width | 57.4 mm |
| Wear Warning Contact | incl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 19 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Number of wear indicators | 1 Per Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle |
| Length | 228 mm |
| Outer diameter | 94.5 mm |
| External Teeth, Wheel Side | 26 |
| Seal Diameter | 60 mm |
| Internal Teeth, wheel side | 27 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 162.7 mm |
| Thickness/Strength 1 | 19.5 mm |
| Function | Brake Pad Set, disc brake |
| Inspection Tag | ECE R90 Approved |
| Placement on Vehicle | Front Axle |
| Width | 63.8 mm |
| Brake System | TRW |
| Wear Warning Contact | incl. wear warning contact |
| Type | Brake Pad Set, disc brake |
| Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 2 |
| for OE number | 58 0239 1886 |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width of castor bearing surface | 20 mm |
| Function | Timing Belt |
| Type | Timing Belt |
| Width | 20 mm |
| Material | HNBR (hydrogenated nitrile butadiene rubber) |
| Number of Teeth | 131 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inner diameter | 30 mm |
| Material | Aluminium |
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| for OE number | 26 12 7 526 631 |
| Additional Information 2 | with ball bearing |
| Replaces | 44563 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension, propshaft (27475)
- 1x Febi Bearing, propshaft centre bearing (05362)
Important compatibility info
| Placement on Vehicle | Right |
| Length | 512 mm |
| Additional Information | without retaining |
| Paired article numbers | 193255 |
| Housing Diameter | 23 mm |
| Eject Force | 175 N |
| Stroke | 183 mm |
| Mounting points diameter | 17.8 mm |
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, bonnet |
| Function | Gas Spring, bonnet |
| Housing length | 295 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 65 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Type | Belt Tensioner, v-ribbed belt |
| for OE number | 16 114 256 80 |
| Width of castor bearing surface | 25.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Upper |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 05953 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, with bearing |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Wire Diameter | 12.3 mm |
| Placement on Vehicle | Front Axle |
| Length | 390 mm |
| Function | Suspension Spring |
| Type | Suspension Spring |
| Outer diameter | 155 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Sensor, wheel speed |
| Length | 1145 mm |
| Placement on Vehicle | Rear Axle Right |
| Paired article numbers | 106326 |
| Number of Connectors / Ports | 2 |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M10 x 1,25 |
| Additional Information 2 | without ball bearing |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| for OE number | 54610-2T000 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Boost Pressure Control Valve |
| Voltage | 12 V |
| Operating Mode | Electric-pneumatic |
| Number of Connectors / Ports | 1 |
| Type | Boost Pressure Control Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Lower, Rear |
| Length | 200 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 100 mm |
| Placement on Vehicle | Front |
| Type | Bush, driver cab suspension |
| Length | 121.5 mm |
| Material | Rubber/Metal |
| Inner diameter | 25 mm |
| Function | Bush, driver cab suspension |
| Replaces | 21773 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Solid |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 280 mm |
| Thickness | 40.2 mm |
| Brake Disc Thickness | 10 mm |
| Minimum thickness | 8 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 72 mm |
| Surface | Coated |
| Number of mounting bores | 3 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Solid |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 284 mm |
| Thickness | 24.6 mm |
| Brake Disc Thickness | 10 mm |
| Minimum thickness | 8.4 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 76 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 9 mm. 25 mm |
| Number of Connectors / Ports | 2 |
| Function | Expansion Tank, coolant |
| Type | Expansion Tank, coolant |
| Additional Information | with coolant level sensor |
| Additional Information 2 | without lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Sheet Steel |
| Additional Information | with rubber mounts, with crown nut and split pin |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 43060 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Mounting, automatic transmission |
| Replaces | 46607 |
| Placement on Vehicle | Centre, Rear |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear, Lower |
| Length | 205 mm |
| Width | 102 mm |
| Thickness | 49 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, automatic transmission |
| Type | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 84.5 mm |
| Internal Teeth, wheel side | 23 |
| External Teeth, Wheel Side | 26 |
| Seal Diameter | 58 mm |
| Function | Joint Kit, drive shaft |
| Length | 149 mm |
| Type | Joint Kit, drive shaft |
| Number of Teeth, ABS ring | 48 |
| External Thread Size | M22 x 1,5 |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 37 mm |
| Number of Connectors / Ports | 7 |
| DIN / ISO | 3731 |
| Voltage | 24 V |
| Inner diameter | 19 mm |
| Number of Coils | 46 |
| Working length | 4.5 m |
| Function | Coiled Cable |
| Material | PU (Polyurethane) |
| Type | Coiled Cable |
| Additional Information 2 | with plug |
| Connecting plug material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Upper Right |
| Function | Radiator Hose |
| Cooling Hose | from thermostat to radiator |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Hose Length | 290 mm |
| Type | Radiator Hose |
| Additional Information 2 | with quick couplers |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Cable Length | 250 mm |
| Function | Cable Repair Kit, tailgate |
| Number of circuits | 8 |
| Extra Description | febi Plus |
| Type | Cable Repair Kit, tailgate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Placement on Vehicle | Right |
| for OE number | 50880-SNA-A02 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023
















































