Proud to be a UK-based company
Contact us
Important compatibility info
| Material | Sheet Steel |
| Paired article numbers | 183093 |
| Placement on Vehicle | Rear Axle Right, Centre |
| Type | Control/Trailing Arm, wheel suspension |
| Steering arm type | Trailing Arm |
| Additional Information 2 | with bearing |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
Technical Information
After replacement, the optical driver assistance systems (cameras, radar, etc.) may need to be recalibrated. Please observe the manufacturer's instructions.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.43
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with bearing |
| Material | Sheet Steel |
| Placement on Vehicle | Rear Axle Left, Centre |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 183092 |
| Steering arm type | Trailing Arm |
Additional Information
Technical Information
After replacement, the optical driver assistance systems (cameras, radar, etc.) may need to be recalibrated. Please observe the manufacturer's instructions.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.43
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Paired article numbers | 173596 |
| Number of Connectors / Ports | 2 |
| Cable Length | 625 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.43
Important compatibility info
| Function | Joint Kit, drive shaft |
| Type | Joint Kit, drive shaft |
| Placement on Vehicle | Front Axle, Wheel Side |
| External Thread Size | M26 x 1,5 |
| Internal Teeth, wheel side | 34 |
| Seal Diameter | 68 mm |
| External Teeth, Wheel Side | 30 |
| Length | 148 mm |
| Outer diameter | 94 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.43
Important compatibility info
| External Teeth, Wheel Side | 26 |
| Internal Teeth, wheel side | 32 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.43
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Paired article numbers | 192916 |
| Number of Connectors / Ports | 2 |
| Cable Length | 580 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.43
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 132 |
| Type | Timing Chain |
| Function | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.43
Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| External Teeth, Wheel Side | 30 |
| Internal Teeth, wheel side | 33 |
| Number of Teeth, ABS ring | 50 |
| ABS Ring Diameter | 102 mm |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.43
Important compatibility info
| Width | 25 mm |
| Number of Teeth | 160 |
| Surface | Coated |
| Belts | with rounded tooth profile |
| Function | Timing Belt |
| Replaces | 34787 |
| Type | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.43
Important compatibility info
| Housing material | Cast Aluminium |
| Function | Water Pump, engine cooling |
| Number of Wings | 6 |
| Seal Material | Rubber |
| Water pump impeller material | Metal |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.43
Important compatibility info
| Additional Information 2 | with piston clip |
| Placement on Vehicle | Front Axle |
| Length | 156.4 mm. 155.2 mm |
| Width | 70.7 mm. 69.6 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 20.3 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.44
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Solid |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 277 mm |
| Thickness | 45 mm |
| Brake Disc Thickness | 9.5 mm |
| Minimum thickness | 8.5 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.44
Important compatibility info
| Placement on Vehicle | transmission sided, Front Axle Left, Front Axle Right |
| Int. teeth, diff.side, conn.to transm. | 34 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.44
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Bore Diameter | 30 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Telescopic Shock Absorber |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 606 mm |
| Min. Length | 370 mm |
| Pipe Diameter | 48 mm. 38 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.44
Important compatibility info
| Material | Metal |
| Outer diameter | 56 mm |
| Inner diameter | 10 mm |
| Mounting points diameter | 10 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Number of ribs 1 | 5 |
| Width of castor bearing surface | 19 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.44
Important compatibility info
| Material | Steel |
| Outer diameter | 39 mm |
| Thickness | 73 mm |
| Operating Mode | Mechanical |
| Type | Tappet |
| Function | Tappet |
| Placement on Vehicle | Exhaust Side |
| Inner diameter | 34 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.44
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 331 mm |
| Outer diameter | 141 mm |
| Function | Suspension Spring |
| Type | Suspension Spring |
| Wire Diameter | 12.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.44
Important compatibility info
| Function | Intake Hose, air filter |
| Material | NBR (nitrile butadiene rubber) |
| Extra Description | febi Plus |
| Type | Intake Hose, air filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.45
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Repair Kit, suspension strut support mount |
| Material | Rubber/Metal |
| Type | Repair Kit, suspension strut support mount |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (22638)
- 1x Febi Rolling Bearing, suspension strut support mount (21757)
£36.46
Important compatibility info
| Housing material | Grey Cast Iron |
| Number of Wings | 8 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Paper |
| Additional Information | with gasket/seal |
| Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.46
Important compatibility info
| Placement on Vehicle | both sides |
| Material | Rubber/Metal |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.46
Important compatibility info
| Placement on Vehicle | Right Rear |
| Length | 1855 mm |
| Paired article numbers | 178625 |
| Type | Cable Pull, parking brake |
| Function | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
| Cable Length | 645 mm |
| Number of Connectors / Ports | 2 |
| Paired article numbers | 198153 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Type | Sensor, wheel speed |
| Cable Length | 645 mm |
| Number of Connectors / Ports | 2 |
| Paired article numbers | 198152 |
| Placement on Vehicle | Rear Axle Right |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 180186 |
| Placement on Vehicle | Rear Axle Left, Front |
| Additional Information | with rubber-metal mounts |
| Material | Steel |
| Steering arm type | Control Arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Length | 45.8 mm |
| Number of Connectors / Ports | 3 |
| Type | Sensor, camshaft position |
| Function | Sensor, camshaft position |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Placement on Vehicle | Left Rear, Lower |
| Length | 880 mm |
| Width | 700 mm |
| Type | Wing |
| Function | Wing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 189 mm |
| Width | 89.6 mm |
| Additional Information 2 | with anti-squeak plate |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 |
| Thickness/Strength 1 | 16.5 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 196815 |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Number of Connectors / Ports | 3 |
| Function | Ignition Coil |
| Type | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Length | 405 mm |
| Type | Pressure Hose, air compressor |
| Function | Pressure Hose, air compressor |
| External Thread Size | M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| for OE number | 46809632 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.48
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Width | 129 mm |
| Inner diameter | 14 mm |
| Material | Rubber/Metal |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Height | 75 mm |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.48
Important compatibility info
| Additional Information 2 | with piston clip |
| Placement on Vehicle | Front Axle |
| Length | 156.4 mm |
| Width | 74.2 mm |
| Wear Warning Contact | incl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 20.3 mm. 19.5 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.48
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 107.2 mm. 100 mm |
| Width | 66 mm. 61 mm |
| Wear Warning Contact | prepared for wear warning indicator |
| Thickness/Strength 1 | 17.5 mm. 16.5 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.48
Important compatibility info
| Width | 30 mm |
| Number of Teeth | 112 |
| Surface | Coated |
| Belts | with trapezoidal tooth profile |
| Function | Timing Belt |
| Type | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.48
Important compatibility info
| Length | 130.9 mm |
| Width | 73 mm |
| Wear Warning Contact | incl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 17 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.48
Important compatibility info
| Outer diameter | 33 mm |
| Opening Temperature | 89 °C |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.48
Important compatibility info
| Function | Sensor, wheel speed |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Number of Connectors / Ports | 2 |
| Cable Length | 520 mm |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.48
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Paired article numbers | 173738 |
| Number of Connectors / Ports | 2 |
| Cable Length | 1695 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.48
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Rear Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178191 |
| Function | Brake Caliper |
| Brake caliper piston diameter | 44 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.48
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Rear Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178190 |
| Function | Brake Caliper |
| Brake caliper piston diameter | 44 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.48
Important compatibility info
| Belts | with trapezoidal tooth profile |
| Water pump impeller material | Metal |
| Number of Teeth | 108 |
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (12657)
- 1x Febi Water Pump, engine cooling (03521)
£36.48
Important compatibility info
| Number of Connectors / Ports | 3 |
| Type | Air Pressure Sensor, altitude adaption |
| Function | Air Pressure Sensor, altitude adaption |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.48
Important compatibility info
| Placement on Vehicle | Rear |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.48
Important compatibility info
| Type | Mounting, engine |
| Function | Mounting, engine |
| Placement on Vehicle | Lower |
| Bearing/Mounting Type | Rubber-Metal Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.48
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 256 mm |
| Thickness | 36.7 mm |
| Brake Disc Thickness | 22 mm |
| Minimum thickness | 19 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 65 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rotor Style | Internally Vented |
| Replaces | 22880 |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.50
Important compatibility info
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 260 mm |
| Thickness | 40.5 mm |
| Brake Disc Thickness | 22 mm |
| Minimum thickness | 19.4 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Replaces | 17747 |
| Function | Brake Disc |
| Number of mounting bores | 1 |
| Surface | Coated |
| Centering Diameter | 67 mm |
| Type | Brake Disc Rotor |
| Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.50
Important compatibility info
| Material | Plastic |
| Number of Connectors / Ports | 3 |
| Function | Sensor, exhaust pressure |
| Type | Sensor, exhaust pressure |
| for OE number | 55198717 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.50
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023