Important compatibility info
| Outer diameter | 151 mm |
| Opening Temperature | 88 °C. 93 °C |
| Type | Thermostat, coolant |
| Function | Thermostat, coolant |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Hose, crankcase ventilation |
| Type | Hose, crankcase ventilation |
| Hose Length | 487 mm |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle, inner |
| Length | 435 mm |
| Type | Brake Hose |
| Function | Brake Hose |
| Internal Thread Size | M10 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 573 mm. 580 mm |
| Width | 27.2 mm. 28.6 mm |
| Thickness | 1.8 mm |
| Number of mounting bores | 11. 12 |
| Function | Gasket Set, oil sump |
| Type | Gasket Set, oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with quick couplers |
| Function | Radiator Hose |
| Cooling Hose | from engine to water pump |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Placement on Vehicle | Centre right |
| Type | Radiator Hose |
| Hose Length | 200 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with gasket/seal |
| Function | Water Pump, engine cooling |
| Seal Material | Rubber |
| Water pump impeller material | Plastic |
| Number of Wings | 7 |
| Housing material | Cast Aluminium |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 12 V |
| Operating Mode | Electric-pneumatic |
| Number of Connectors / Ports | 2 |
| Type | Pressure converter, turbocharger |
| Function | Pressure converter, turbocharger |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | 11 71 7 804 381 |
| Type | EGR Valve |
| Function | EGR Valve |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | 55611-55L01 |
| Rim Hole Number | 5 -Hole |
| Rotor Style | Solid |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 278 mm |
| Thickness | 43 mm |
| Brake Disc Thickness | 9 mm |
| Minimum thickness | 8 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 62 mm |
| Surface | Coated |
| Number of mounting bores | 3 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Ignition Coil |
| Type | Ignition Coil |
| Number of Connectors / Ports | 4 |
| Colour | Red |
| Replaces | 36359 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with oil sump gasket |
| Function | Hydraulic Filter Kit, automatic transmission |
| Type | Hydraulic Filter Kit, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M12 x 1,75 |
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 3 |
| for OE number | 13 62 8 637 898 |
| Type | Sensor, intake manifold pressure |
| Function | Sensor, intake manifold pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M18 x 1,5 |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| Lambda Sensor | Heated |
| Spanner Size | 22 |
| Number of circuits | 4 |
| Cable Length | 370 mm |
| Placement on Vehicle | after catalytic converter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 35.6 mm |
| Outer diameter | 55 mm |
| Inner diameter | 17 mm |
| Number of Ribs | 6 |
| Function | Alternator Freewheel Clutch |
| Additional Information 2 | with lid |
| Type | Alternator Freewheel Clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Plastic |
| Number of Connectors / Ports | 2 |
| Opening Temperature | 83 °C |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Additional Information 2 | with Temperature Switch |
| Housing Type | with housing |
| for OE number | 1336.AF |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Rod/Strut | Guide Rod |
| Paired article numbers | 23963 |
| Steering arm type | Control Arm |
| Additional Information | with rubber mounts |
| Type | Rod/Strut, wheel suspension |
| Function | Rod/Strut, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 90 mm |
| Material | Metal |
| Outer diameter | 88 mm |
| Mounting points diameter | 8.5 mm |
| Type | Tensioner Pulley, v-ribbed belt |
| Function | Tensioner Pulley, v-ribbed belt |
| Width of castor bearing surface | 20 mm |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | 39574 |
| Function | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
| External Thread Size | M8 x 1,25 |
| Type | Suspension Strut Support Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right Rear |
| Material | Rubber/Metal |
| Inner diameter | 12 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Repair Kit, brake camshaft |
| Type | Repair Kit, brake camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Bearing, brake camshaft (19002)
- 2x Febi Shaft Seal, brake camshaft (19003)
- 1x Febi Circlip, brake shaft (07493)
- 1x Febi Spacer, brake shaft (07490)
- 1x Febi Spacer, brake shaft (07488)
- 1x Febi Spacer, brake shaft (07487)
- 1x Febi Stop Plate, adjuster (07484)
- 1x Febi Spacer, brake shaft (19004)
Important compatibility info
| Rim Hole Number | 4 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 236 mm |
| Thickness | 40.8 mm |
| Brake Disc Thickness | 20 mm |
| Minimum thickness | 18 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 60 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rotor Style | Internally Vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 28 mm |
| Width | 133 mm |
| Colour | Orange |
| Rated Power | 18 W |
| Cable Length | 1500 mm |
| Voltage from | 9 V |
| Number of circuits | 4 |
| Voltage to | 30 V |
| Protection Type (IP Code) | IP67 |
| Fulfils ECE norm | R65, R10 |
| Housing material | Aluminium |
| Temperature range from | -40 °C |
| Temperature range to | 65 °C |
| Function | Strobe-type Beacon |
| Inspection Tag | EMC, SAE |
| Light Design | LED |
| Depth | 17 mm |
| Type | Strobe-type Beacon |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Rear Axle Left, Front Axle Right, Rear Axle Right |
| Outer diameter | 230 mm. 131 mm |
| Thickness | 420 mm |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Additional Information | without piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Length | 750 mm |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inner diameter | 75 mm |
| Function | Bearing, manual transmission |
| Height | 34.25 mm |
| Outer diameter | 140 mm |
| Type | Bearing, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 380 mm |
| Number of Coils | 7 |
| Outer diameter | 116 mm |
| Wire Diameter | 12.8 mm |
| Type | Suspension Spring |
| Function | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 2 |
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 107614 |
| Cable Length | 610 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right Rear, Left Rear |
| Length | 1779 mm |
| Type | Cable Pull, parking brake |
| Function | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Housing material | Aluminium |
| Operating Mode | Automatic |
| Outer diameter | 65 mm |
| Type | Belt Tensioner, v-ribbed belt |
| for OE number | 51821652 |
| Width of castor bearing surface | 25.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 156.4 mm |
| Width | 74.2 mm |
| Wear Warning Contact | excl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 20.3 mm. 19.5 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Replaces | 16314; 16322 |
| Additional Information 2 | with piston clip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Paired article numbers | 170896 |
| Function | Sensor, wheel speed |
| Cable Length | 670 mm |
| Type | Sensor, wheel speed |
| Number of Connectors / Ports | 2 |
| Placement on Vehicle | Rear Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Bore Diameter | 19 mm |
| Fill Medium | Brake Fluid |
| Function | Master Cylinder, clutch |
| Type | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Opening Temperature | 92 °C |
| Type | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Ignition Coil |
| Type | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front |
| Length | 2909 mm |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 485 mm |
| Width | 300 mm |
| Material | Aluminium, ACM (Polyacrylate) |
| Thickness | 2.2 mm |
| Function | Gasket, automatic transmission oil sump |
| Type | Gasket, automatic transmission oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 28.5 mm |
| Outer diameter | 62 mm |
| Function | Tensioner Pulley, timing belt |
| Type | Tensioner Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 75.6 mm |
| Function | Brake Pad Set, disc brake |
| Thickness/Strength 1 | 13.8 mm |
| Length | 121 mm |
| Placement on Vehicle | Front Axle |
| Inspection Tag | ECE R90 Approved |
| Wear Warning Contact | prepared for wear warning indicator |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rotor Style | Solid |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 290 mm |
| Thickness | 46.2 mm |
| Brake Disc Thickness | 10 mm |
| Minimum thickness | 8 mm |
| Bolt Hole Circle Diameter | 139.7 mm |
| Centering Diameter | 108.3 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 131.8 mm |
| Width | 97 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 14.7 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Control Element, parking brake caliper |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Extra Description | febi Plus |
| Number of Teeth | 6 |
| Type | Control Element, parking brake caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 40 mm |
| Outer diameter | 63 mm |
| Type | Alternator Freewheel Clutch |
| Function | Alternator Freewheel Clutch |
| Number of Ribs | 6 |
| Additional Information 2 | with lid |
| Inner diameter | 17 mm |
| Placement on Vehicle | engine sided |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Wings | 6 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Paper |
| Housing material | Cast Aluminium |
| Type | Water Pump, engine cooling |
| Additional Information | with gasket/seal |
| Additional Information 2 | with bolts, with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Teeth, Wheel Side | 30 |
| ABS Ring Diameter | 83 mm |
| Number of Teeth, ABS ring | 48 |
| Thread Size | M24x1,5 |
| Placement on Vehicle | Wheel Side, Front Axle |
| Internal Teeth, wheel side | 26 |
| Function | Joint Kit, drive shaft |
| Type | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 100 mm |
| Height | 72 mm |
| Width | 72 mm |
| Number of Connectors / Ports | 2 |
| Function | Hand Feed Pump |
| Internal Thread Size | M16 x 1,5 |
| Type | Hand Feed Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage from | 12 V |
| Voltage to | 24 V |
| Function | Tail Light Assembly |
| Temperature range to | 65 °C |
| Type | Tail Light Assembly |
| Fulfils ECE norm | R148, R10 |
| Temperature range from | -40 °C |
| Placement on Vehicle | Left, Right |
| Height | 140 mm |
| Width | 140 mm |
| Inspection Tag | D,ADR |
| Light Function | with indicator (LED), with stop light (LED), with taillight (LED), without licence plate light |
| Shape/Form | round |
| Mounting Type | Fully assembled |
| Depth | 86 mm |
| Distance of fastening bolts | 45 mm |
| Protection Type (IP Code) | IP6K9K |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 179171 |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 34 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Brake caliper piston diameter | 34 mm |
| Placement on Vehicle | Rear Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 179170 |
| Type | Brake Caliper |
| Function | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 65 mm |
| Width of castor bearing surface | 25 mm |
| Function | Belt Tensioner, v-ribbed belt |
| Material | Metal |
| Type | Belt Tensioner, v-ribbed belt |
| Operating Mode | Automatic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023
















































