Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 48.5 mm |
| Width | 35 mm |
| Material | Rubber |
| Outer diameter | 34.5 mm |
| Thickness | 48.5 mm |
| Inner diameter | 17.5 mm |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 48.5 mm |
| Width | 35 mm |
| Material | Rubber |
| Outer diameter | 34.5 mm |
| Thickness | 48.5 mm |
| Inner diameter | 17.5 mm |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 194 mm |
| Material | Rubber |
| Inner diameter 1 | 25 mm |
| Inner diameter 2 | 40 mm |
| Function | Bellow, steering |
| Type | Bellow, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 194 mm |
| Material | Rubber |
| Inner diameter 1 | 25 mm |
| Inner diameter 2 | 40 mm |
| Function | Bellow, steering |
| Type | Bellow, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Lower |
| Material | Rubber with fabric lining |
| Outer diameter | 43 mm |
| Inner diameter | 33 mm |
| Colour | Black |
| Function | Radiator Hose |
| Cooling Hose | from engine cooler to water pump |
| Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Lower |
| Material | Rubber with fabric lining |
| Outer diameter | 43 mm |
| Inner diameter | 33 mm |
| Colour | Black |
| Function | Radiator Hose |
| Cooling Hose | from engine cooler to water pump |
| Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Right, Rear Axle Left |
| Material | Steel |
| Outer diameter | 80 mm |
| Inner diameter | 69 mm |
| Number of Teeth, ABS ring | 42 |
| Type | Sensor Ring, ABS |
| Function | Sensor Ring, ABS |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Right, Rear Axle Left |
| Material | Steel |
| Outer diameter | 80 mm |
| Inner diameter | 69 mm |
| Number of Teeth, ABS ring | 42 |
| Type | Sensor Ring, ABS |
| Function | Sensor Ring, ABS |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Oil Dipstick |
| Function | Oil Dipstick |
| Extra Description | febi Plus |
| Length from grip collar to max. marking | 470 mm |
| Length from grip collar to min. marking | 520 mm |
| Colour | Yellow |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Oil Dipstick |
| Function | Oil Dipstick |
| Extra Description | febi Plus |
| Length from grip collar to max. marking | 470 mm |
| Length from grip collar to min. marking | 520 mm |
| Colour | Yellow |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 71 mm |
| Width | 52 mm |
| Material | PU (Polyurethane) |
| Type | Rubber Buffer, suspension |
| Function | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 71 mm |
| Width | 52 mm |
| Material | PU (Polyurethane) |
| Type | Rubber Buffer, suspension |
| Function | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Hose, crankcase ventilation |
| Type | Hose, crankcase ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Hose, crankcase ventilation |
| Type | Hose, crankcase ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 92 mm |
| Rod/Strut | Coupling Rod |
| Material | Steel |
| Thickness | 33 mm |
| Spanner Size | 13 |
| Surface | Zinc-coated |
| Function | Link/Coupling Rod, stabiliser bar |
| Additional Information | with rubber mounts, with nuts |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information 2 | with washers |
| External Thread Size | M8 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 92 mm |
| Rod/Strut | Coupling Rod |
| Material | Steel |
| Thickness | 33 mm |
| Spanner Size | 13 |
| Surface | Zinc-coated |
| Function | Link/Coupling Rod, stabiliser bar |
| Additional Information | with rubber mounts, with nuts |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information 2 | with washers |
| External Thread Size | M8 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 75 mm |
| Outer diameter | 83 mm |
| Inner diameter | 30 mm |
| Filter type | Filter Insert |
| Function | Fuel filter |
| Type | Fuel filter |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 75 mm |
| Outer diameter | 83 mm |
| Inner diameter | 30 mm |
| Filter type | Filter Insert |
| Function | Fuel filter |
| Type | Fuel filter |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 377 mm |
| Height | 20 mm |
| Width | 135 mm |
| Filter type | Pollen Filter |
| Function | Filter, cabin air |
| Type | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 377 mm |
| Height | 20 mm |
| Width | 135 mm |
| Filter type | Pollen Filter |
| Function | Filter, cabin air |
| Type | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 35 mm |
| Number of Connectors / Ports | 2 |
| Function | Ignition Switch |
| Height | 40.5 mm |
| Additional Information | with gasket/seal |
| Type | Ignition Switch |
| Additional Information 2 | with nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| Length | 82 mm |
| Material | Rubber |
| Inner diameter 1 | 22 mm |
| Inner diameter 2 | 83 mm |
| Function | Bellow, drive shaft |
| Type | Bellow, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| Length | 82 mm |
| Material | Rubber |
| Inner diameter 1 | 22 mm |
| Inner diameter 2 | 83 mm |
| Function | Bellow, drive shaft |
| Type | Bellow, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rod/Strut | Coupling Rod |
| Length | 270 mm |
| Thread Measurement 2 | M10X1.5 |
| Thread Size | M10X1.5 |
| Function | Link/Coupling Rod, stabiliser bar |
| Material | Cast Steel |
| Type | Link/Coupling Rod, stabiliser bar |
Important compatibility info
| Rod/Strut | Coupling Rod |
| Length | 270 mm |
| Thread Measurement 2 | M10X1.5 |
| Thread Size | M10X1.5 |
| Function | Link/Coupling Rod, stabiliser bar |
| Material | Cast Steel |
| Type | Link/Coupling Rod, stabiliser bar |
Important compatibility info
| Width | 25 mm |
| Function | Fastening Clamp, charge air hose |
| Quantity | 1 |
| Diameter From | 79 mm |
| Diameter To | 85 mm |
| Type | Fastening Clamp, charge air hose |
Important compatibility info
| Length | 37.8 mm |
| Inner diameter | 12.4 mm |
| Diameter | 40.2 mm |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
| Paired article numbers | FSK7715 |
| Placement on Vehicle | Rear Axle, Left, Right, inner |
Important compatibility info
| Length | 37.8 mm |
| Inner diameter | 12.4 mm |
| Diameter | 40.2 mm |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
| Paired article numbers | FSK7715 |
| Placement on Vehicle | Rear Axle, Left, Right, inner |
Important compatibility info
| Inner diameter 2 | 55 mm |
| Inner diameter 1 | 55 mm |
| Function | Charge Air Hose |
| Colour | Black |
| Material | NBR (nitrile butadiene rubber) |
| Type | Charge Air Hose |
Additional Information
- 1x First Line Fastening Clamp, charge air hose (FHC1002S)
- 1x First Line Fastening Clamp, charge air hose (FHC1103S)
Important compatibility info
| Inner diameter 2 | 55 mm |
| Inner diameter 1 | 55 mm |
| Function | Charge Air Hose |
| Colour | Black |
| Material | NBR (nitrile butadiene rubber) |
| Type | Charge Air Hose |
Additional Information
- 1x First Line Fastening Clamp, charge air hose (FHC1002S)
- 1x First Line Fastening Clamp, charge air hose (FHC1103S)
Important compatibility info
| Operating temperature from [C] | 90 °C |
| Extra Description | Fuel Parts |
| Function | Temperature Switch, radiator fan |
| Operating temperature to | 85 °C |
| Housing Colour | Black |
| Technical Information Number | Circuit N.O. |
| Spanner Size | 17 |
| Thread Size | M16 x 1.5 |
| Number of Poles | 1 -pin connector |
| Weight | 0.04 kg |
| Type | Temperature Switch, radiator fan |
Important compatibility info
| Operating temperature from [C] | 90 °C |
| Extra Description | Fuel Parts |
| Function | Temperature Switch, radiator fan |
| Operating temperature to | 85 °C |
| Housing Colour | Black |
| Technical Information Number | Circuit N.O. |
| Spanner Size | 17 |
| Thread Size | M16 x 1.5 |
| Number of Poles | 1 -pin connector |
| Weight | 0.04 kg |
| Type | Temperature Switch, radiator fan |
Important compatibility info
| Title | Mini Relay - 12V - 5-Pin |
Additional Information
Pearl have a created an easy to fit and robust range of relay units. This particular unit is a 12 Volt 40 Amp mini relay. It is a changeover relay with a diode across the coil. Contains 30, 85, 86, 87 and 87a Pins.
Pearl has established a reputation over the years for delivering high quality products. With recent expansions into a more diverse product portfolio of automotive products, its established Wot Nots' brand is still thriving. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.
- No Bracket
- Changeover Relay
- Resistor across coil
- 12 Volts 40 Amps
- Pearl Mini Relay
- Relay used for specific applications within the accessory market, must be fitted by a qualified auto electrician
- 30, 85, 86, 87 & 87A Pins
Important compatibility info
| Function | Sensor, coolant temperature |
| Connector Shape | angular |
| Housing Colour | Brown |
| Spanner Size | 19 |
| Number of Poles | 2 -pin connector |
| Thread Size | M14 x 1.25 |
| Additional Information 2 | without cable |
| Weight | 0.03 kg |
| Fitting Depth | 8 mm |
| Type | Sensor, coolant temperature |
| Net weight | 0.028 kg |
Important compatibility info
| Function | Sensor, coolant temperature |
| Connector Shape | angular |
| Housing Colour | Brown |
| Spanner Size | 19 |
| Number of Poles | 2 -pin connector |
| Thread Size | M14 x 1.25 |
| Additional Information 2 | without cable |
| Weight | 0.03 kg |
| Fitting Depth | 8 mm |
| Type | Sensor, coolant temperature |
| Net weight | 0.028 kg |
Important compatibility info
| Extra Description | Kerr Nelson |
| Function | Condenser, ignition |
| Manufacturer Restriction | Bosch |
| Weight | 0.03 kg |
| Type | Condenser, ignition |
Important compatibility info
| Extra Description | Kerr Nelson |
| Function | Condenser, ignition |
| Manufacturer Restriction | Bosch |
| Weight | 0.03 kg |
| Type | Condenser, ignition |
Important compatibility info
| Height | 30 mm |
| Weight | 0.03 kg |
| Type | Mount, exhaust system |
| Width | 30 mm |
| Function | Mount, exhaust system |
| Length | 60 mm |
Important compatibility info
| Height | 30 mm |
| Weight | 0.03 kg |
| Type | Mount, exhaust system |
| Width | 30 mm |
| Function | Mount, exhaust system |
| Length | 60 mm |
Important compatibility info
Important compatibility info
| Net weight | 0.098 kg |
| Thread Size | M22 x 1.5 |
| Number of Poles | 3 -pin connector |
| Spanner Size | 29 |
| Technical Information Number | 100/110° - 95/105°, Circuit N.O./N.O. |
| Housing Colour | Black |
| Connector Shape | Round |
| Type | Temperature Switch, radiator fan |
| Function | Temperature Switch, radiator fan |
Important compatibility info
| Net weight | 0.098 kg |
| Thread Size | M22 x 1.5 |
| Number of Poles | 3 -pin connector |
| Spanner Size | 29 |
| Technical Information Number | 100/110° - 95/105°, Circuit N.O./N.O. |
| Housing Colour | Black |
| Connector Shape | Round |
| Type | Temperature Switch, radiator fan |
| Function | Temperature Switch, radiator fan |
Important compatibility info
| for OE number | 32005-2J000 |
| Cable Length | 330 mm |
| Net weight | 0.068 kg |
| Function | Switch, reverse light |
| Connector Shape | Oval |
| Housing Colour | Black |
| Technical Information Number | Circuit N.O. |
| Spanner Size | 19 |
| Number of Poles | 2 -pin connector |
| Thread Size | M14 x 1.5 |
| Additional Information 2 | with cable |
| Type | Switch, reverse light |
Important compatibility info
| for OE number | 32005-2J000 |
| Cable Length | 330 mm |
| Net weight | 0.068 kg |
| Function | Switch, reverse light |
| Connector Shape | Oval |
| Housing Colour | Black |
| Technical Information Number | Circuit N.O. |
| Spanner Size | 19 |
| Number of Poles | 2 -pin connector |
| Thread Size | M14 x 1.5 |
| Additional Information 2 | with cable |
| Type | Switch, reverse light |
Important compatibility info
| Function | Ignition Distributor Rotor |
| Manufacturer Restriction | Mitsubishi |
| Distributor/ Rotor | no interference suppression |
| Type | Ignition Distributor Rotor |
| Extra Description | Lucas Premium Blade |
| Net weight | 0.046 kg |
Important compatibility info
| Function | Ignition Distributor Rotor |
| Manufacturer Restriction | Mitsubishi |
| Distributor/ Rotor | no interference suppression |
| Type | Ignition Distributor Rotor |
| Extra Description | Lucas Premium Blade |
| Net weight | 0.046 kg |
Important compatibility info
| Function | Filter, cabin air |
| Width | 205 mm |
| Height | 29 mm |
| Length | 300 mm |
| Type | Filter, cabin air |
| Filter type | Particulate Filter |
Important compatibility info
| Function | Filter, cabin air |
| Width | 205 mm |
| Height | 29 mm |
| Length | 300 mm |
| Type | Filter, cabin air |
| Filter type | Particulate Filter |
Important compatibility info
| Height | 104 mm |
| Type | Oil Filter |
| Filter type | Filter Insert |
| Function | Oil Filter |
| Inner diameter 1 | 42 mm |
| Outer diameter | 82 mm |
| Inner diameter 2 | 42 mm |
Important compatibility info
| Height | 104 mm |
| Type | Oil Filter |
| Filter type | Filter Insert |
| Function | Oil Filter |
| Inner diameter 1 | 42 mm |
| Outer diameter | 82 mm |
| Inner diameter 2 | 42 mm |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023


























