Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 290 mm |
| Thickness | 34.9 mm |
| Brake Disc Thickness | 12 mm |
| Minimum thickness | 10 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 71.1 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Function | Brake Disc |
| Rim Hole Number | 4 -Hole |
| Rotor Style | Solid |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M20 x 1,5 |
| Placement on Vehicle | Front Axle Right, Front Axle Left, Wheel Side |
| Internal Teeth, wheel side | 21 |
| Seal Diameter | 52.5 mm |
| External Teeth, Wheel Side | 24 |
| Outer diameter | 75 mm |
| Length | 158 mm |
| Number of Teeth, ABS ring | 48 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
Technical Information
Attention! Before installation, the number of teeth on the internal gear of the existing part and the new one must be compared. The number of teeth can vary on the originally factory-side installed part, and compatibility is only ensured if the numbers match.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Mounting, engine |
| Function | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| for OE number | 51815759 |
| Placement on Vehicle | Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Teeth, Wheel Side | 33 |
| Internal Teeth, wheel side | 32 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Thermostat, coolant |
| Material | Plastic |
| Number of Connectors / Ports | 2 |
| Opening Temperature | 83 °C |
| Type | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Additional Information 2 | with Temperature Switch |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 22 mm |
| Outer diameter | 61.5 mm |
| Function | Tensioner Pulley, timing belt |
| Type | Tensioner Pulley, timing belt |
| Inner diameter | 9 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 920 mm |
| Width | 32 mm |
| Outer diameter | 74 mm |
| Function | Support, radiator fan |
| Type | Support, radiator fan |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 3 |
| Ignition Coil | 4 Spark |
| Function | Ignition Coil |
| Type | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | PE (Polyethylene) |
| Colour | White |
| Function | Washer Fluid Reservoir, window cleaning |
| Extra Description | febi Plus |
| Type | Washer Fluid Reservoir, window cleaning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Front Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178201 |
| Function | Brake Caliper |
| Brake caliper piston diameter | 54 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Front Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178200 |
| Function | Brake Caliper |
| Brake caliper piston diameter | 54 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thickness/Strength 1 | 14.5 mm |
| Placement on Vehicle | Front Axle |
| Wear Warning Contact | incl. wear warning contact |
| Width | 69.4 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Length | 142.7 mm |
| Inspection Tag | R90 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Transmission ID | AQ450 |
| Transmission Type | 8-Speed Automatic Transmission |
| Length | 160 mm |
| Height | 51 mm |
| Width | 150 mm |
| Additional Information 2 | with seal ring, with oil sump gasket |
| Filter type | Screen Filter |
| Type | Hydraulic Filter Kit, automatic transmission |
| Function | Hydraulic Filter Kit, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Cover Sheet, brake drum |
| Inner diameter | 267 mm |
| Placement on Vehicle | Front Axle |
| Height | 36 mm |
| Outer diameter | 453 mm |
| Function | Cover Sheet, brake drum |
| Paired article numbers | 196027 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with coolant level sensor |
| Function | Expansion Tank, coolant |
| Number of Connectors / Ports | 2 |
| Material | PA (polyamide) |
| Type | Expansion Tank, coolant |
| Additional Information 2 | without lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with lid |
| Outer diameter | 60 mm |
| Inner diameter | 17 mm |
| Number of Ribs | 7 |
| Type | Alternator Freewheel Clutch |
| Function | Alternator Freewheel Clutch |
| for OE number | 271 155 01 15 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 174.5 mm |
| Width | 69.5 mm |
| Wear Warning Contact | incl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 20 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Operating Mode | Electric |
| Colour | Black |
| Number of Connectors / Ports | 3 |
| Outer Length | 142 mm |
| Function | Gear Lever Knob |
| Width | 59 mm. 72 mm |
| Type | Gear Lever Knob |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 40681 |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with bolts/screws |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (32443)
- 2x Febi Screw (40664)
- 1x Febi Screw (40663)
- 1x Febi Nut (28702)
Important compatibility info
| Housing length | 282 mm |
| Function | Gas Spring, bonnet |
| Type | Gas Spring, bonnet |
| Piston conrod diameter | 8 mm |
| Stroke | 282 mm |
| Mounting points diameter | 18 mm |
| Eject Force | 260 N |
| Housing Diameter | 26 mm |
| Paired article numbers | 177459 |
| Length | 471 mm |
| Placement on Vehicle | Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Function | Brake Hose |
| External Thread Size | M10 x 1 |
| Type | Brake Hose |
| Length | 785 mm |
| Paired article numbers | 185029 |
| Internal Thread Size | M10 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rim Hole Number | 4 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 241 mm |
| Thickness | 48 mm |
| Brake Disc Thickness | 19 mm |
| Minimum thickness | 17.5 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 62 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rotor Style | Internally Vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inner diameter | 12 mm |
| Length | 89 mm |
| Material | Metal |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Thread Length | 50 mm |
| Bolt Head/Nut Design | External Hexagon |
| Outer diameter | 75 mm |
| Mounting points diameter | 12 mm |
| Width of castor bearing surface | 32.5 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Rear Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 179445 |
| Function | Brake Caliper |
| Brake caliper piston diameter | 43 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Rear Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 179444 |
| Function | Brake Caliper |
| Brake caliper piston diameter | 43 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | ACM (Polyacrylate) |
| Type | Gasket, cylinder head cover |
| Function | Gasket, cylinder head cover |
| Placement on Vehicle | Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, transmission sided, Front Axle Right |
| Internal Teeth, wheel side | 28 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Oil Cooler, automatic transmission |
| Additional Information 2 | with seal ring |
| Transmission Type | Automatic Transmission |
| Type | Oil Cooler, automatic transmission |
| Additional Information | with seal rings |
| for OE number | 02E 409 061 D S1 |
| Number of Ribs | 11 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Cooler, automatic transmission (105874)
- 2x Febi Seal Ring, oil cooler (lubrication) (108877)
Important compatibility info
| Length | 1880 mm |
| Placement on Vehicle | Right Rear |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right |
| Paired article numbers | 107049 |
| Cable Length | 900 mm |
| Number of circuits | 7 |
| Function | Cable Repair Kit, tailgate |
| Extra Description | febi Plus |
| Type | Cable Repair Kit, tailgate |
| for door opening angle | 90 ° |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 155.4 mm. 156.4 mm |
| Width | 74.2 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 20.3 mm. 19.5 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Additional Information 2 | with piston clip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Colour | Black |
| Function | Valve, crankcase ventilation |
| Extra Description | febi Plus |
| Additional Information | with gasket/seal |
| Type | Valve, crankcase ventilation |
| for OE number | 06F 129 101 R S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Valve, crankcase ventilation (46518)
- 1x Febi Gasket, crankcase ventilation (44481)
Important compatibility info
| Width | 48 mm |
| Outer diameter | 85 mm |
| Thickness | 84 mm |
| Inner diameter | 29 mm |
| Number of Holes | 5 |
| Bolt Hole Circle Diameter | 112 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
| Additional Information | with fastening/mounting material |
| Outer diameter 1 | 65 mm |
| Outer diameter 2 | 137 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Cylinder Head, air compressor |
| Type | Cylinder Head, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 40680 |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with bolts/screws |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (32444)
- 2x Febi Screw (40664)
- 1x Febi Screw (40663)
- 1x Febi Nut (28702)
Important compatibility info
| Function | Shaft Seal, crankshaft |
| Type | Shaft Seal, crankshaft |
| Additional Information 2 | with flange |
| Inner diameter | 93 mm |
| Placement on Vehicle | transmission sided |
| Height | 23.5 mm. 11.8 mm |
| Material | PTFE (polytetrafluoroethylene) |
| Outer diameter | 227 mm |
| Outer diameter 1 | 159 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Brake Caliper Type | Brake Caliper (1 piston) |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Placement on Vehicle | Rear Axle Left |
| Material | Cast Aluminium |
| Paired article numbers | 178173 |
| Brake caliper piston diameter | 34 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Brake Caliper Type | Brake Caliper (1 piston) |
| Material | Cast Aluminium |
| Placement on Vehicle | Rear Axle Right |
| Paired article numbers | 178172 |
| Function | Brake Caliper |
| Type | Brake Caliper |
| Brake caliper piston diameter | 34 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 34760 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Ignition Coil |
| Type | Ignition Coil |
| Number of Connectors / Ports | 4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 296 mm |
| Thickness | 57.6 mm |
| Brake Disc Thickness | 10 mm |
| Minimum thickness | 8 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 67 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Rotor Style | Solid |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 251 mm |
| Thickness | 62.4 mm |
| Brake Disc Thickness | 12 mm |
| Minimum thickness | 10.8 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 71 mm |
| Surface | Coated |
| Function | Brake Disc |
| Rotor Style | Solid |
| Type | Brake Disc Rotor |
| Rim Hole Number | 4 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left |
| Length | 204 mm |
| Width | 170 mm |
| Thickness | 115 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, automatic transmission |
| Type | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Sheet Steel |
| Outer diameter | 138 mm |
| Inner diameter | 36 mm |
| Number of Ribs | 5 |
| Parameter | 6PK |
| Function | Belt Pulley, crankshaft |
| Thickness | 27 mm |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Mounting, radiator |
| Type | Mounting, radiator |
| Placement on Vehicle | Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Surface | PTFE (Polytetrafluorethylene) coated |
| Width | 18 mm |
| Number of Teeth | 116 |
| Belts | with trapezoidal tooth profile |
| Function | Timing Belt |
| Type | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 117 mm |
| Outer diameter | 117 mm |
| Thickness | 64 mm |
| Inner diameter | 30 mm |
| Number of Holes | 4 |
| Bolt Hole Circle Diameter | 98 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 117 mm |
| Voltage | 11 V |
| Spanner Size | 12 |
| Fitting Depth | 30 mm |
| Glow Plug Type | after-glow capable |
| Type | Glow Plug |
| Function | Glow Plug |
| External Thread Size | M10 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Oil Cooler, engine oil |
| Type | Oil Cooler, engine oil |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Material | Rubber/Metal |
| Additional Information 2 | with fastening material, with ball bearing |
| Type | Repair Kit, suspension strut support mount |
| Function | Repair Kit, suspension strut support mount |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Repair Kit, suspension strut support mount (46046)
- 3x Febi Screw (194481)
- 1x Febi Nut (43511)
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023
















































