Important compatibility info
| Placement on Vehicle | Right Front |
| Operating Mode | Electric |
| Paired article numbers | 36218 |
| Function | Window Regulator |
| Type | Window Regulator |
| Additional Information | without electric motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 3 |
| Function | Sensor, intake manifold pressure |
| Type | Sensor, intake manifold pressure |
| for OE number | 13 62 7 804 742 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Bolt Hole Circle Diameter | 78 mm |
| Wheel Sided Joint Diameter | 79 mm |
| Bore Diameter | 8.5 mm |
| Transmission-side joint diameter | 93.7 mm |
| Thread Size | M16 x 1,5 |
| Type | Drive Shaft |
| External Teeth, Wheel Side | 36 |
| Number of mounting bores | 6 |
| Additional Information | with grease |
| Additional Information 2 | with nut |
| Min. Length | 505 mm |
| Function | Drive Shaft |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Spanner Size | 22 |
| Cable Length | 620 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated, Regulating Sensor |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right, Upper |
| Additional Information | with rubber mounts |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 1001948 |
| Cone Size | 14.5 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size 1 | 14.5 mm |
| External Thread Size | M14 x 2 |
Additional Information
Technical Information
If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Upper |
| Additional Information | with rubber mounts |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 280667, 1001947 |
| Cone Size | 14.5 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size 1 | 14.5 mm |
| External Thread Size | M14 x 2 |
Additional Information
Technical Information
If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | febi Plus |
| Type | Filling Adapter Set, transmission |
| Function | Filling Adapter Set, transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Parameter | 6PK |
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
| Width | 43 mm |
| Inner diameter | 36 mm |
| Outer diameter | 142 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Bearing Type | Angular Ball Bearing |
| Outer diameter 1 | 57 mm |
| Additional Information | with nuts |
| Outer diameter 2 | 136 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 78 mm |
| Outer diameter | 60 mm |
| Number of Holes | 4 |
| Bolt Hole Circle Diameter | 100 mm |
| Function | Wheel Bearing Kit |
| Inner diameter | 30 mm |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
| Replaces | 14696 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Lower Front Axle, Left |
| Steering arm type | Control Arm |
| Material | Cast Steel |
| Paired article numbers | 18501 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 18503 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Screw length below head | 73 mm |
| Function | Repair Kit, flywheel |
| Type | Repair Kit, flywheel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Pilot Bearing, clutch (01470)
- 10x Febi Flywheel Bolt (02403)
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 245 mm |
| Thickness | 83.7 mm |
| Brake Disc Thickness | 10 mm |
| Minimum thickness | 8 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 45.1 mm |
| Surface | Coated |
| Function | Brake Disc |
| Rotor Style | Solid |
| Type | Brake Disc Rotor |
| Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Timing Belt Kit |
| Number of Teeth | 109 |
| Width | 25 mm |
| Type | Timing Belt Kit |
| Belts | with rounded tooth profile |
| Units / Pulleys | incl. tensioner pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (26850)
- 1x Febi Tensioner Pulley, timing belt (26994)
Important compatibility info
| Additional Information | with rubber-metal mounts |
| Material | Sheet Steel |
| Placement on Vehicle | Upper, Rear Axle Right |
| Paired article numbers | 184817 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
Additional Information
Technical Information
If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Paired article numbers | 184816 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber-metal mounts |
| Placement on Vehicle | Upper, Rear Axle Left |
| Steering arm type | Control Arm |
| Material | Sheet Steel |
Additional Information
Technical Information
If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Operating Mode | Electric-pneumatic |
| Number of Connectors / Ports | 2 |
| Type | Pressure Converter, exhaust control |
| Function | Pressure Converter, exhaust control |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 48180 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Cone Size | 16 mm |
| Additional Information | with rubber mounts |
Additional Information
Technical Information
If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Outer, Rear Axle Right |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 170522 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Outer |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 170521 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Resistor, interior blower |
| Extra Description | febi Plus |
| Number of Connectors / Ports | 4 |
| Type | Resistor, interior blower |
| for OE number | 7E0 959 263 C |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Material | Cast Iron |
| Paired article numbers | 182274 |
| Brake caliper piston diameter | 38 mm |
| Function | Brake Caliper |
| Type | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 182273 |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Cone Size | 16 mm |
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 48181 |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
Technical Information
If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M12 x 1,25 |
| Steering arm type | Control Arm |
| Additional Information | with nuts, with rubber mounts |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 16.5 mm |
| Paired article numbers | 175383 |
| Material | Sheet Steel |
| Additional Information 2 | with bolts/screws |
| Placement on Vehicle | Front Axle Left, Lower |
Additional Information
Technical Information
If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 131.8 mm |
| Width | 70.7 mm |
| Wear Warning Contact | prepared for wear warning indicator |
| Thickness/Strength 1 | 17.2 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Water pump impeller material | Plastic |
| Number of Wings | 6 |
| Seal Material | Rubber |
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
| Additional Information 2 | with seal ring |
| for OE number | 46338675 |
| Pulleys | with belt pulley |
| Housing material | Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Cable Length | 440 mm |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Timing Belt Kit |
| Number of Teeth | 111 |
| Type | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (15779)
- 1x Febi Tensioner Pulley, timing belt (24544)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (26051)
Important compatibility info
| Operating Mode | Electric |
| Number of Connectors / Ports | 2 |
| Type | Pressure Control Valve, common rail system |
| Function | Pressure Control Valve, common rail system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rotor Style | Solid |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 278 mm |
| Thickness | 58 mm |
| Brake Disc Thickness | 9.2 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Surface | Coated |
| Mounting points diameter | 15 mm |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Parts Set, maintenance service |
| Type | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Filter (32122)
- 1x Febi Air Filter (30368)
- 4x Febi Spark Plug (13536)
- 1x Febi Fuel filter (17635)
- 1x Febi Screw Plug, oil sump (04572)
- 1x Febi Filter, cabin air (32367)
- 1x Febi Filter, cabin air (11236)
Important compatibility info
| Rotor Style | Solid |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 300 mm |
| Thickness | 41.5 mm |
| Brake Disc Thickness | 10 mm |
| Minimum thickness | 8.3 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 67 mm |
| Surface | Coated |
| Function | Brake Disc |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Type | Brake Disc Rotor |
| Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Transmission Type | 7-Speed Dual-Clutch Transmission |
| Type | Shaft Seal, automatic transmission |
| Function | Shaft Seal, automatic transmission |
| Transmission ID | DQ500 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 37443 |
| Steering arm type | Control Arm |
| Inner diameter | 12 mm |
| Material | Aluminium |
| Placement on Vehicle | Rear Axle Right, Upper, Rear |
| External Thread Size | M14 x 1,5 |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with bearing, with ball joint |
| Additional Information | with lock nut |
Additional Information
Technical Information
If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (37446)
Important compatibility info
| Thickness/Strength 1 | 7 mm |
| Placement on Vehicle | Rear Axle |
| Inspection Tag | ECE R90 Approved |
| Outer diameter | 295 mm |
| Width | 58 mm |
| Function | Brake Shoe Set |
| Type | Brake Shoe Set |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | after catalytic converter |
| Spanner Size | 22 |
| Cable Length | 820 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated, Diagnostic Probe |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left Rear |
| Paired article numbers | 01961 |
| Function | Door Seal |
| Type | Door Seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Pressure Accumulator, pneumatic suspension |
| Type | Pressure Accumulator, pneumatic suspension |
| Capacity | 0.4 l |
| Placement on Vehicle | Front Axle, both sides |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Sensor, wheel speed |
| Cable Length | 1740 mm |
| Placement on Vehicle | Front Axle Left |
| Number of Connectors / Ports | 2 |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with squeeze connector |
| Additional Information 2 | with bellow |
| Cable Length | 300 mm |
| Number of circuits | 11 |
| Type | Cable Repair Kit, tailgate |
| Function | Cable Repair Kit, tailgate |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Spanner Size | 22 |
| Cable Length | 817 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated, Diagnostic Probe |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 2 |
| for OE number | 55267602 |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with nut |
| Min. Length | 616 mm |
| External Teeth, Wheel Side | 25 |
| Thread Size | M22x1,5 |
| Wheel Sided Joint Diameter | 79 mm |
| Transmission-side joint diameter | 70.5 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| External Teeth, Diff.Side | 23 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Aluminium |
| Function | Oil Cooler, engine oil |
| Type | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Oil Separator, crankcase ventilation |
| Function | Oil Separator, crankcase ventilation |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Wear Warning Contact | excl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 17.4 mm |
| Function | Brake Pad Set, disc brake |
| Placement on Vehicle | Front Axle |
| Length | 123.1 mm |
| Width | 56.1 mm |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | B33H-18-861C |
| Spanner Size | 22 |
| Cable Length | 800 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 243 mm |
| Outer diameter | 335 mm |
| Inner diameter | 133 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with quick couplers |
| Cooling Hose | from engine cooler to water pump |
| Function | Radiator Hose |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber), Plastic |
| Hose Length | 325 mm |
| Type | Radiator Hose |
| for OE number | 17 12 7 519 248 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































