Proud to be a UK-based company
Contact us
Important compatibility info
| Function | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Rear |
| for OE number | 98 117 866 80 |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.38
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 80 mm. 61 mm |
| Outer diameter | 75 mm |
| Thickness | 80 mm |
| Inner diameter | 14 mm |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, control/trailing arm |
| Function | Mounting, control/trailing arm |
| Extra Description | ProKit |
| Additional Information 2 | with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (44987)
- 1x Febi Bolt, control arm (40158)
- 2x Febi Washer (21558)
- 2x Febi Protective Cap, control/trailing arm mounting (44983)
- 1x Febi Nut (21557)
£50.39
Important compatibility info
| External Thread Size | M20 x 1,5 |
| Placement on Vehicle | Front Axle Right, Front Axle Left, Wheel Side |
| Internal Teeth, wheel side | 21 |
| Seal Diameter | 52.5 mm |
| External Teeth, Wheel Side | 24 |
| Outer diameter | 75 mm |
| Length | 158 mm |
| Number of Teeth, ABS ring | 48 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
Technical Information
Attention! Before installation, the number of teeth on the internal gear of the existing part and the new one must be compared. The number of teeth can vary on the originally factory-side installed part, and compatibility is only ensured if the numbers match.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.40
Important compatibility info
| Outer diameter | 154 mm |
| Thickness | 34 mm |
| Inner diameter | 30 mm |
| Number of Ribs | 5 |
| Parameter | 6PK |
| Function | Belt Pulley, crankshaft |
| Additional Information 2 | with screw |
| Extra Description | ProKit |
| Type | Belt Pulley, crankshaft |
| Replaces | 36890 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (29333)
- 1x Febi Pulley Bolt (33781)
£50.40
Important compatibility info
| Voltage | 24 V |
| Operating Mode | Electric |
| Number of Connectors / Ports | 16 |
| Rated Power | 21 W |
| Function | Flasher Unit |
| Type | Flasher Unit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.40
Important compatibility info
| Function | Wheel Bearing Kit |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Outer diameter | 73 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 85 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with ABS sensor ring |
| Inner diameter | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.41
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 280 mm |
| Thickness | 59 mm |
| Brake Disc Thickness | 10 mm |
| Inner diameter | 173 mm |
| Minimum thickness | 8 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 62 mm |
| Surface | Coated |
| Number of mounting bores | 3 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rotor Style | Solid |
| Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.42
Important compatibility info
| Water pump impeller material | Metal |
| Seal Material | Paper |
| Number of Wings | 8 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Additional Information | with gasket/seal |
| Housing material | Cast Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.42
Important compatibility info
| Height | 483 mm |
| Outer diameter | 327 mm |
| Inner diameter | 216 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.42
Important compatibility info
| External Thread Size | M22 x 1,5 |
| Internal Thread Size | M16 x 1,5 |
| Length | 110 mm |
| Width | 102 mm |
| Thickness | 97 mm |
| Function | Relay Valve |
| Type | Relay Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.42
Important compatibility info
| Placement on Vehicle | Front |
| Operating Mode | Pneumatic |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 256 mm |
| Min. Length | 202 mm |
| Pipe Diameter | 38 mm |
| Mounting points diameter | 16 mm |
| Function | Shock Absorber, driver cab suspension |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.43
Important compatibility info
| Function | Repair Kit, suspension strut support mount |
| Material | Aluminium |
| Placement on Vehicle | Front Axle |
| Type | Repair Kit, suspension strut support mount |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.43
Important compatibility info
| Function | Pump, fuel pre-supply |
| Internal Thread Size | M14 x 1,5 |
| Type | Pump, fuel pre-supply |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.43
Important compatibility info
| Length | 633 mm |
| Function | Brake Shaft, drum brake |
| Screw length below head | 588 mm |
| Number of Teeth | 10 |
| Outer diameter | 103 mm |
| Type | Brake Shaft, drum brake |
| Paired article numbers | 174141 |
| Placement on Vehicle | Left |
| Rotation Direction | Clockwise rotation |
| Brake Shaft Cam | S-cam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.43
Important compatibility info
| Paired article numbers | 174140 |
| Type | Brake Shaft, drum brake |
| Number of Teeth | 10 |
| Outer diameter | 103 mm |
| Screw length below head | 588 mm |
| Function | Brake Shaft, drum brake |
| Length | 633 mm |
| Placement on Vehicle | Right |
| Rotation Direction | Anticlockwise rotation |
| Brake Shaft Cam | S-cam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.43
Important compatibility info
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 21440 |
| Placement on Vehicle | Front Axle Left, Lower, Front |
| Outer Length | 418 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, with bearing |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (21219)
£50.45
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Material | Rubber/Metal |
| Additional Information 2 | without ball bearing |
| Type | Suspension Strut Support Mount |
| Function | Suspension Strut Support Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.45
Important compatibility info
| Width | 47 mm |
| Outer diameter | 170 mm |
| Inner diameter | 110 mm |
| Bearing Type | Tapered Roller Bearing |
| Function | Wheel Bearing |
| Placement on Vehicle | Rear Axle Left, inner, Rear Axle Right |
| Type | Wheel Bearing |
| Bearing Code | 33022 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.45
Important compatibility info
| Tensile Cord Material | Polyester |
| Type | V-Ribbed Belt Set |
| Function | V-Ribbed Belt Set |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 6 |
| Length | 1050 mm |
| Width of castor bearing surface | 25 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (28916)
- 1x Febi Belt Tensioner, v-ribbed belt (31076)
£50.46
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Solid |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 274 mm |
| Thickness | 67.3 mm |
| Brake Disc Thickness | 10 mm |
| Minimum thickness | 8.5 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 58 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.47
Important compatibility info
| Hole Spacing | 45.66 mm |
| Length | 86 mm |
| Outer diameter | 28 mm. 26 mm. 22.6 mm |
| Pressure | 6.5 bar |
| Type | Oil Pressure Valve |
| Function | Oil Pressure Valve |
| Screw length below head | 79 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.48
Important compatibility info
| Paired article numbers | 185994 |
| Brake caliper piston diameter | 54 mm |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Placement on Vehicle | Front Axle Right |
| Material | Cast Iron |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.49
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 193.29 mm. 193.22 mm |
| Wear Warning Contact | incl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 20 mm |
| Function | Brake Pad Set, disc brake |
| Additional Information 2 | with piston clip |
| Type | Brake Pad Set, disc brake |
| Width | 73 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.50
Important compatibility info
| Steering arm type | Control Arm |
| Paired article numbers | 181396 |
| Material | Cast Steel |
| Placement on Vehicle | Front Axle Right, Upper |
| External Thread Size | M12 x 1,75 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 14 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.50
Important compatibility info
| External Thread Size | M12 x 1,75 |
| Placement on Vehicle | both sides |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.51
Important compatibility info
| Placement on Vehicle | Front Axle Left, Rear |
| Material | Aluminium |
| Inner diameter | 12 mm |
| Steering arm type | Control Arm |
| Paired article numbers | 45094 |
| Function | Control/Trailing Arm, wheel suspension |
| External Thread Size | M14 x 1,5 |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with rubber mount, with ball joint |
| Cone Size | 16 mm |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.51
Important compatibility info
| Type | Repair Kit, suspension strut support mount |
| Placement on Vehicle | Front Axle |
| Additional Information 2 | with fastening material, with ball bearing |
| Function | Repair Kit, suspension strut support mount |
| Material | Rubber/Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (105831)
- 1x Febi Nut, stabiliser bar (175043)
- 3x Febi Nut (177338)
- 1x Febi Rolling Bearing, suspension strut support mount (109699)
£50.52
Important compatibility info
| Width | 25 mm |
| Number of Teeth | 151 |
| Belts | with rounded tooth profile |
| Function | Timing Belt Kit |
| Type | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (14372)
- 1x Febi Tensioner Pulley, timing belt (03600)
£50.52
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 27078 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts, with holder |
| Additional Information 2 | without ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.53
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 27076 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with holder, with rubber mounts |
| Additional Information 2 | without ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.53
Important compatibility info
| Material | Aluminium |
| Number of Connectors / Ports | 2 |
| Function | Oil Cooler, automatic transmission |
| Type | Oil Cooler, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.53
Important compatibility info
| Rotor Style | Solid |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 302 mm |
| Thickness | 37 mm |
| Brake Disc Thickness | 12 mm |
| Minimum thickness | 9 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 63.6 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.53
Important compatibility info
| Length | 241 mm |
| Material | Steel |
| Outer diameter | 206 mm |
| Number of Connectors / Ports | 4 |
| Capacity | 6 l |
| Operating Pressure | 15.5 bar |
| Type | Air Tank, compressed-air system |
| Function | Air Tank, compressed-air system |
| Internal Thread Size | M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.53
Important compatibility info
| Additional Information | with gasket/seal |
| Material | Metal |
| Type | Oil Cooler, engine oil |
| Function | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.54
Important compatibility info
| Housing Diameter | 41 mm |
| Stroke | 60 mm |
| Type | Slave Cylinder, engine brake |
| Function | Slave Cylinder, engine brake |
| Pressure side external thread size | M8 x 1,25 |
| Housing length | 168 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.54
Important compatibility info
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
| Placement on Vehicle | before soot particulate filter |
| Number of Connectors / Ports | 2 |
| Cable Length | 719 mm |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.54
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 83 mm |
| Outer diameter | 136.7 mm |
| Inner diameter | 28 mm |
| Number of Holes | 5 |
| Bolt Hole Circle Diameter | 102 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.54
Important compatibility info
| Placement on Vehicle | Rear |
| for OE number | 11360-JD00A |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.54
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 24532 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.56
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 24533 |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.56
Important compatibility info
| Seal Material | Rubber |
| Additional Information | with gasket/seal |
| Number of Wings | 7 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.56
Important compatibility info
| Function | Repair Kit, driver cab suspension |
| Type | Repair Kit, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Bolt (08377)
- 4x Febi Bush, driver cab suspension (08371)
- 2x Febi Hinge, driver cab (08372)
- 2x Febi Hinge, driver cab (08373)
- 2x Febi Screw (08374)
- 4x Febi Washer (08375)
- 4x Febi Washer (08376)
- 2x Febi Joint Bearing, connector rod (06066)
- 4x Febi Grease Nipple (01094)
- 4x Febi Nut (01697)
£50.57
Important compatibility info
| Fill Medium | Brake Fluid |
| Function | Master Cylinder, clutch |
| Bore Diameter | 22 mm |
| Type | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.57
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 160 mm. 215 mm |
| Thickness | 260 mm |
| Function | Bellow, air suspension |
| External Thread Size | M8 x 1,5 |
| Type | Bellow, air suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.57
Important compatibility info
| Thickness | 69 mm |
| Paired article numbers | 174236 |
| Inner diameter 1 | 26 mm |
| Function | Mounting, control/trailing arm |
| Inner diameter 2 | 30 mm |
| Type | Mounting, control/trailing arm |
| Length | 194 mm |
| Width | 86 mm |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle Left, Lower, Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.58
Important compatibility info
| Type | Air Filter |
| Function | Air Filter |
| Filter type | Filter Insert |
| Inner diameter | 180 mm |
| Outer diameter | 310 mm |
| Height | 524 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.58
Important compatibility info
| Additional Information 2 | Requires special tools for mounting |
| Chain Type | Simplex, with chain lock |
| Number of Chain Links | 134 |
| Function | Timing Chain |
| Timing Chain Size | G68WN, G68V |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.59
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 256 mm |
| Thickness | 56.5 mm |
| Brake Disc Thickness | 22 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Surface | Coated |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Rotor Style | Internally Vented |
| Rim Hole Number | 4 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.59
Important compatibility info
| Width | 146 mm |
| Length | 180 mm |
| Placement on Vehicle | Rear |
| Thickness | 74 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, automatic transmission |
| Type | Mounting, automatic transmission |
| Replaces | 29331 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.59
Important compatibility info
| Function | Mounting, manual transmission |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Left |
| Type | Mounting, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.59
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023