Proud to be a UK-based company
Contact us
Important compatibility info
| Material | Aluminium |
| Opening Temperature | 92 °C. 107 °C |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.17
Important compatibility info
| Type | Wheel Bearing Kit |
| Bearing Type | Angular Ball Bearing |
| Bolt Hole Circle Diameter | 115 mm |
| Number of Holes | 5 |
| Inner diameter | 37 mm |
| Width | 64 mm |
| Outer diameter | 139 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.18
Important compatibility info
| Additional Information | with rubber mounts |
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 173110 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
| Inner diameter | 16 mm |
Additional Information
Technical Information
If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.20
Important compatibility info
| Function | Ignition Coil |
| Number of Connectors / Ports | 3 |
| Type | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.20
Important compatibility info
| Cone Size 2 | 21.5 mm |
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 173109 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
| Inner diameter | 16 mm |
| Additional Information | with rubber mounts |
Additional Information
Technical Information
If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.20
Important compatibility info
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Length | 280 mm |
| External Thread Size | M18 x 1,5 |
| Spanner Size | 22 |
| Number of Connectors / Ports | 4 |
| Cable Length | 380 mm |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| Voltage | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.21
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 22633 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.22
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Bore Diameter | 19 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Telescopic Shock Absorber |
| Shock Absorber Mounting Type | Top eye, Bottom Pin |
| Mounting bores distance | 354 mm |
| Max. Length | 354 mm |
| Min. Length | 234 mm |
| Pipe Diameter | 53 mm. 45 mm |
| Piston conrod diameter | 10 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| External Thread Size | M10 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.22
Important compatibility info
| Number of Connectors / Ports | 2 |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.22
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Front, Front Axle Right |
| Inner diameter | 12 mm |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with attachment/mounting material |
| Material | Cast Steel |
| External Thread Size | M14 x 1,5 |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, with rubber mount |
Additional Information
Technical Information
If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (45989)
- 1x Febi Bolt, control arm (40852)
- 1x Febi Nut (34653)
£49.24
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.24
Important compatibility info
| Paired article numbers | 100107 |
| Length | 395 mm |
| External Thread Size | M14 x 1,5, M12 x 1,5 |
| Placement on Vehicle | Front Axle Left |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.25
Important compatibility info
| Type | Brake Pad Set, disc brake |
| Thickness/Strength 1 | 16.5 mm |
| Width | 74 mm |
| Length | 97 mm |
| Placement on Vehicle | Front Axle |
| Wear Warning Contact | incl. wear warning contact |
| Function | Brake Pad Set, disc brake |
| Inspection Tag | ECE R90 Approved |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.25
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 181702 |
| Type | Brake Caliper |
| Brake caliper piston diameter | 42 mm |
| Function | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.26
Important compatibility info
| Type | Brake Caliper |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Material | Cast Iron |
| Placement on Vehicle | Rear Axle Right |
| Function | Brake Caliper |
| Brake caliper piston diameter | 42 mm |
| Paired article numbers | 181701 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.26
Important compatibility info
| Additional Information | with nuts |
| Outer diameter 1 | 65.4 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 68 mm |
| Outer diameter | 70 mm |
| Number of Holes | 5 |
| Bolt Hole Circle Diameter | 105 mm |
| Number of Connectors / Ports | 2 |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Outer diameter 2 | 140 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated ABS sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.26
Important compatibility info
| Min. Length | 329 mm |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Mounting Type | Top pin, Bottom Clamp |
| Bore Diameter | 12 mm |
| Shock Absorber Type | Gas Pressure |
| Placement on Vehicle | Front Axle Left |
| Pipe Diameter | 51 mm |
| Piston conrod diameter | 22 mm |
| Max. Length | 509 mm |
| External Thread Size | M12 x 1,25 |
| Type | Shock Absorber |
| Mounting bores distance | 60 mm |
| Function | Shock Absorber |
| Shock Absorber Design | Suspension Strut |
| Paired article numbers | 193148 |
Additional Information
Technical Information
If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.27
Important compatibility info
| Length | 230 mm |
| Combi Switch Function | with indicator function, with klaxon |
| Width | 80 mm |
| Thickness | 42 mm |
| Number of Connectors / Ports | 8 |
| Cable Length | 880 mm |
| Function | Steering Column Switch |
| Type | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.28
Important compatibility info
| Function | Shock Absorber, driver cab suspension |
| Type | Shock Absorber, driver cab suspension |
| Mounting points diameter | 14 mm |
| Pipe Diameter | 40 mm. 46 mm |
| Min. Length | 193 mm |
| Max. Length | 239 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Operating Mode | Mechanical |
| Placement on Vehicle | Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.28
Important compatibility info
| Voltage | 12 V |
| Operating Mode | Electric-pneumatic |
| Number of Connectors / Ports | 2 |
| Type | Boost Pressure Control Valve |
| Function | Boost Pressure Control Valve |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.29
Important compatibility info
| Outer diameter | 305 mm |
| Operating Mode | Electric |
| Number of Connectors / Ports | 3 |
| Rated Power | 60 W, 100 W |
| Number of Wings | 7 |
| Function | Fan, engine cooling |
| Type | Fan, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.29
Important compatibility info
| External Thread Size | M12 x 1,5 |
| Additional Information | with rubber mounts, with lock nut |
| Placement on Vehicle | Front Axle Right, Lower |
| Paired article numbers | 06157 |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Material | Sheet Steel |
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size | 17.3 mm |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (03142)
£49.30
Important compatibility info
| Placement on Vehicle | Rear |
| Material | Rubber/Metal |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, manual transmission |
| Type | Mounting, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.30
Important compatibility info
| Additional Information 2 | with screw |
| Width | 28 mm |
| Outer diameter | 142 mm |
| Inner diameter | 30 mm |
| Number of Ribs | 4 |
| Parameter | 5PK |
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (27721)
- 1x Febi Pulley Bolt (33675)
£49.30
Important compatibility info
| Material | Plastic |
| Colour | Black |
| Function | Expansion Tank, coolant |
| Type | Expansion Tank, coolant |
| Additional Information 2 | without cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.30
Important compatibility info
| Outer diameter | 158 mm |
| Placement on Vehicle | Rear Axle |
| Length | 263 mm |
| Spring Design | Coil spring with inconstant wire diameter |
| Function | Suspension Spring |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.30
Important compatibility info
| Outer diameter | 60 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Type | Belt Tensioner, v-ribbed belt |
| for OE number | 5751.A2 |
| Width of castor bearing surface | 26 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.30
Important compatibility info
| Placement on Vehicle | Front, Left |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| External Thread Size | M12 x 1,5 |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.30
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Solid |
| Placement on Vehicle | Front Axle |
| Outer diameter | 298 mm |
| Thickness | 70.2 mm |
| Brake Disc Thickness | 14 mm |
| Minimum thickness | 13 mm |
| Bolt Hole Circle Diameter | 127 mm |
| Centering Diameter | 102 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Brake Disc Type | solid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.30
Important compatibility info
| Spanner Size | 22 |
| Cable Length | 450 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.30
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with attachment/mounting material |
| Cone Size | 18 mm |
| Paired article numbers | 178855 |
| Steering arm type | Control Arm |
| Material | Sheet Steel |
| Placement on Vehicle | Upper, Front Axle Left |
| External Thread Size | M14 x 1,5 |
| Additional Information 2 | with ball joint, with bearing |
Additional Information
Technical Information
If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.30
Important compatibility info
| Additional Information | with attachment/mounting material |
| Type | Wheel Bearing Kit |
| Bolt Hole Circle Diameter | 112 mm |
| Outer diameter 2 | 143 mm |
| Width | 64 mm |
| Placement on Vehicle | Rear Axle |
| Replaces | 36487 |
| Function | Wheel Bearing Kit |
| Bearing Type | Double Row |
| Outer diameter 1 | 67 mm |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
| Outer diameter | 71 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.30
Important compatibility info
| External Teeth, Diff.Side | 22 |
| External Teeth, Wheel Side | 22 |
| Function | Drive Shaft |
| Min. Length | 913 mm |
| ABS Ring Diameter | 78 mm |
| Wheel Sided Joint Diameter | 79 mm |
| Transmission-side joint diameter | 83 mm |
| Type | Drive Shaft |
| Placement on Vehicle | Front Axle Right |
| Additional Information | with Split Pin |
| Additional Information 2 | with nut |
| Thread Size | M20x1,5 |
| Paired article numbers | 183291 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.30
Important compatibility info
| Wire Diameter | 15.3 mm |
| Length | 322 mm |
| Outer diameter | 115 mm |
| Function | Suspension Spring |
| Number of Coils | 7.3 |
| Type | Suspension Spring |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.30
Important compatibility info
| Material | Plastic |
| for OE number | 77 01 478 318 SK |
| Type | Expansion Tank, coolant |
| Function | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.30
Important compatibility info
| Seal Material | Rubber |
| Additional Information 2 | with seal ring |
| Number of Teeth | 31 |
| Number of Wings | 6 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Housing material | Cast Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.30
Important compatibility info
| Material | Aluminium |
| Outer diameter | 70 mm |
| Function | Belt Tensioner, v-ribbed belt |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Track rollers material | Plastic |
| Type | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 26 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.30
Important compatibility info
| Number of Connectors / Ports | 3 |
| Function | Ignition Coil |
| Type | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.30
Important compatibility info
| Material | Rubber/Metal |
| Bearing/Mounting Type | Hydro Mount |
| Placement on Vehicle | Right |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 82 00 014 931 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.30
Important compatibility info
| Function | Rod/Strut, wheel suspension |
| Steering arm type | Control Arm |
| Paired article numbers | 104815 |
| Rod/Strut | Pull Rod |
| Additional Information 2 | with rubber mount |
| Material | Cast Steel |
| Placement on Vehicle | Front Axle Left |
| Length | 488 mm |
| Type | Rod/Strut, wheel suspension |
Additional Information
Technical Information
If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.30
Important compatibility info
| Number of Connectors / Ports | 2 |
| Opening Temperature | 95 °C |
| Housing Type | with housing |
| Type | Thermostat, coolant |
| Function | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.30
Important compatibility info
| Width | 20 mm |
| Material | HNBR (hydrogenated nitrile butadiene rubber) |
| Number of Teeth | 146 |
| Type | Timing Belt |
| Function | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.30
Important compatibility info
| Outer diameter | 158 mm |
| Additional Information 2 | with screw |
| Number of Ribs | 5 |
| Parameter | 6PK |
| Function | Belt Pulley, crankshaft |
| Thickness | 35 mm |
| Extra Description | ProKit |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (36310)
- 1x Febi Ring Gear, crankshaft (36070)
- 1x Febi Pulley Bolt (33675)
£49.30
Important compatibility info
| Additional Information 2 | without ball joint |
| Steering arm type | Control Arm |
| Material | Sheet Steel |
| Placement on Vehicle | Front Axle Right |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with holder, with rubber mounts |
| Paired article numbers | 31313 |
Additional Information
Technical Information
If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.30
Important compatibility info
| External Thread Size | M24 x 1,5 |
| Rod/Strut | Push Rod |
| Placement on Vehicle | Front Axle |
| Length | 878 mm |
| Pipe Diameter | 36 mm |
| Function | Centre Rod Assembly |
| Cone Size | 30 mm |
| Internal Thread Size | M30 x 1,5 RHT |
| Driver Position | for left-hand/right-hand drive vehicles |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.31
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 40.5 mm |
| Outer diameter | 84 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
| Inner diameter | 26 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Outer diameter 2 | 142 mm |
| Outer diameter 1 | 69 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing Kit (172775)
- 1x Febi Split Pin (173993)
£49.31
Important compatibility info
| Voltage | 12 V |
| Number of Connectors / Ports | 2 |
| Rated Power | 222 W |
| Type | Interior Blower |
| Function | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.31
Important compatibility info
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Length | 4100 mm |
| Function | V-Ribbed Belt |
| Number of Ribs | 9 |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.31
Important compatibility info
| Placement on Vehicle | Rear |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, automatic transmission |
| Function | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.31
Important compatibility info
| Additional Information 2 | without cover |
| Function | Expansion Tank, coolant |
| Material | PP (Polypropylene) |
| Type | Expansion Tank, coolant |
| Additional Information | with coolant level sensor |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.31
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023