Proud to be a UK-based company
Contact us
Important compatibility info
| Function | Suspension, propshaft |
| Additional Information 2 | with rolling bearing |
| Hole Spacing | 57 mm |
| Type | Suspension, propshaft |
| Inner diameter | 54 mm |
| Length | 39 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension, propshaft (107328)
- 1x Febi Bearing, propshaft centre bearing (05362)
£50.29
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 141 mm |
| Extra Description | ProKit |
| Function | Tie Rod End |
| Type | Tie Rod End |
| Cone Size | 30 mm |
| External Thread Size | M30 x 1,5 |
| Internal Thread Size | M24 x 1,5 |
| Thread Type | with right-hand thread |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.29
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 18 mm |
| Paired article numbers | 177893 |
| Steering arm type | Control Arm |
| Additional Information 2 | with ball joint |
| Material | Sheet Steel |
| Placement on Vehicle | Front Axle Right |
| Additional Information | with rubber mounts |
Additional Information
Technical Information
If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.29
Important compatibility info
| Function | Deflection/Guide Pulley, V-ribbed belt |
| Mounting points diameter | 17 mm |
| Material | Metal |
| Type | Deflection/Guide Pulley, V-ribbed belt |
| Inner diameter | 10 mm |
| Width of castor bearing surface | 18 mm |
| Outer diameter | 65 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.29
Important compatibility info
| Voltage | 12 V |
| Number of Connectors / Ports | 2 |
| Rated Power | 186 W |
| Type | Interior Blower |
| Function | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.29
Important compatibility info
| Placement on Vehicle | Lower |
| Material | Plastic |
| Outer diameter | 65 mm |
| Operating Mode | Automatic |
| Type | Belt Tensioner, v-ribbed belt |
| Function | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 25 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.29
Important compatibility info
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 187785 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Right |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.29
Important compatibility info
| Additional Information | with rubber mounts |
| Placement on Vehicle | Right, Front Axle Right |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 107907 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
Additional Information
Technical Information
If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.29
Important compatibility info
| Material | Metal |
| Outer diameter | 80 mm |
| Operating Mode | Automatic |
| Type | Belt Tensioner, v-ribbed belt |
| Function | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.29
Important compatibility info
| Spanner Size | 18 |
| Bearing/Mounting Type | Hydro Mount |
| Placement on Vehicle | Right |
| External Thread Size | M12 x 1,75 |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 82 00 140 431 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.29
Important compatibility info
| Outer/Inner Mirror | Heatable |
| Function | Mirror Glass, exterior mirror |
| Camber Radius | 1200 mm |
| Type | Mirror Glass, exterior mirror |
| Driver Position | for left-hand/right-hand drive vehicles |
| Length | 207 mm |
| Placement on Vehicle | Right |
| Paired article numbers | 183533 |
| Vehicle Equipment | for vehicles with blind spot assistant |
| Thickness | 20 mm |
| Width | 140 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.29
Important compatibility info
| Housing length | 391.5 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
| Piston conrod diameter | 8 mm |
| Mounting points diameter | 17.8 mm |
| Housing Diameter | 22 mm |
| Eject Force | 670 N |
| Length | 627 mm |
| Stroke | 186 mm |
| Placement on Vehicle | both sides |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.29
Important compatibility info
| Number of Wings | 6 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Metal |
| Housing material | Cast Aluminium |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.29
Important compatibility info
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 288 mm |
| Thickness | 46 mm |
| Brake Disc Thickness | 25 mm |
| Minimum thickness | 23 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Brake Disc Type | internally vented |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.30
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 271 mm |
| Thickness | 96.6 mm |
| Brake Disc Thickness | 15.8 mm |
| Minimum thickness | 14 mm |
| Bolt Hole Circle Diameter | 130 mm |
| Centering Diameter | 85 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Replaces | 09101 |
| Rotor Style | Solid |
| Type | Brake Disc Rotor |
| Brake Disc Type | solid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.30
Important compatibility info
| External Thread Size | M16 x 1,5 |
| Placement on Vehicle | Front Axle Left |
| Length | 280 mm |
| Paired article numbers | 45484 |
| Rod/Strut | Coupling Rod |
| Cone Size | 20 mm |
| Pipe Diameter | 28 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.31
Important compatibility info
| Rod/Strut | Coupling Rod |
| Cone Size | 20 mm |
| Pipe Diameter | 28 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Placement on Vehicle | Front Axle Right |
| Length | 280 mm |
| Paired article numbers | 45364 |
| External Thread Size | M16 x 1,5 |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.31
Important compatibility info
| Spanner Size | 22 |
| Cable Length | 870 mm |
| Number of circuits | 4 |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
| Type | Oxygen Sensor |
| Lambda Sensor | Heated |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.31
Important compatibility info
| Rim Hole Number | 4 -Hole |
| Placement on Vehicle | Rear Axle |
| Width | 43.8 mm |
| Outer diameter | 215.9 mm |
| Thickness | 76 mm |
| Inner diameter | 180.1 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 50.2 mm |
| Max.skimmed drum measure | 181 mm |
| Function | Brake Drum |
| Type | Brake Drum |
| Additional Information 2 | without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.32
Important compatibility info
| Width | 57 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Outer diameter | 83 mm |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
| Outer diameter 1 | 68 mm |
| Outer diameter 2 | 138.8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.33
Important compatibility info
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 23889 |
| Placement on Vehicle | Rear Axle Upper, Left Rear |
| Additional Information 2 | with ball joint, with bearing |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.34
Important compatibility info
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 23888 |
| Placement on Vehicle | Rear Axle Upper, Right Rear |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, with bearing |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.34
Important compatibility info
| Thickness | 64 mm |
| Brake Disc Thickness | 16 mm |
| Minimum thickness | 13.5 mm |
| Bolt Hole Circle Diameter | 118 mm |
| Centering Diameter | 73 mm |
| Surface | Coated |
| Number of mounting bores | 5 |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 256 mm |
| Type | Brake Disc Rotor |
| Rotor Style | Solid |
| Brake Disc Type | solid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.36
Important compatibility info
| Spanner Size | 17 |
| Number of Connectors / Ports | 2 |
| Cable Length | 220 mm |
| Function | Sensor, exhaust gas temperature |
| External Thread Size | M14 x 1,5 |
| Type | Sensor, exhaust gas temperature |
| Placement on Vehicle | before catalytic converter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.36
Important compatibility info
| Outer diameter | 53 mm |
| Function | Joint, propshaft |
| Length | 135 mm |
| Type | Joint, propshaft |
| Additional Information | with Lubricating Nipple |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.37
Important compatibility info
| Type | Oil Separator, crankcase ventilation |
| Function | Oil Separator, crankcase ventilation |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.37
Important compatibility info
| Pipe Diameter | 51 mm |
| Shock Absorber System | Twin-Tube |
| Min. Length | 329 mm |
| Max. Length | 509 mm |
| Mounting bores distance | 60 mm |
| Shock Absorber Design | Suspension Strut |
| Shock Absorber Mounting Type | Top pin, Bottom Clamp |
| External Thread Size | M12 x 1,25 |
| Shock Absorber Type | Gas Pressure |
| Placement on Vehicle | Front Axle Right |
| Bore Diameter | 12 mm |
| Piston conrod diameter | 22 mm |
| Function | Shock Absorber |
| Type | Shock Absorber |
| Paired article numbers | 193146 |
Additional Information
Technical Information
If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.37
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information | with rubber mounts |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 196891 |
| Cone Size | 16 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.37
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 80 mm. 61 mm |
| Outer diameter | 75 mm |
| Thickness | 80 mm |
| Inner diameter | 14 mm |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, control/trailing arm |
| Function | Mounting, control/trailing arm |
| Extra Description | ProKit |
| Additional Information 2 | with fastening material |
Additional Information
Technical Information
If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (44987)
- 1x Febi Bolt, control arm (40158)
- 2x Febi Washer (21558)
- 2x Febi Protective Cap, control/trailing arm mounting (44983)
- 1x Febi Nut (21557)
£50.39
Important compatibility info
| Placement on Vehicle | Front Axle Right, Front Axle Left, Wheel Side |
| Internal Teeth, wheel side | 21 |
| Seal Diameter | 52.5 mm |
| External Teeth, Wheel Side | 24 |
| Length | 158 mm |
| Number of Teeth, ABS ring | 48 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
| Additional Information | with grease |
| Additional Information 2 | with nut |
| Thread Size | M20 x 1,5 |
| ABS Ring Diameter | 75 mm |
Additional Information
Technical Information
Attention! Before installation, the number of teeth on the internal gear of the existing part and the new one must be compared. The number of teeth can vary on the originally factory-side installed part, and compatibility is only ensured if the numbers match.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.40
Important compatibility info
| Outer diameter | 154 mm |
| Thickness | 34 mm |
| Inner diameter | 30 mm |
| Number of Ribs | 5 |
| Parameter | 6PK |
| Function | Belt Pulley, crankshaft |
| Additional Information 2 | with screw |
| Extra Description | ProKit |
| Type | Belt Pulley, crankshaft |
| Replaces | 36890 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (29333)
- 1x Febi Pulley Bolt (33781)
£50.40
Important compatibility info
| Voltage | 24 V |
| Operating Mode | Electric |
| Number of Connectors / Ports | 16 |
| Rated Power | 21 W |
| Function | Flasher Unit |
| Type | Flasher Unit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.40
Important compatibility info
| Placement on Vehicle | Rear Axle, Front |
| Thickness | 51 mm |
| Paired article numbers | 33660 |
| Function | Bush Set, axle beam |
| Outer diameter | 80 mm |
| Type | Bush Set, axle beam |
| Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Bushing, axle beam (33659)
- 2x Febi Screw (02535)
£50.42
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 280 mm |
| Thickness | 59 mm |
| Brake Disc Thickness | 10 mm |
| Inner diameter | 173 mm |
| Minimum thickness | 8 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 62 mm |
| Surface | Coated |
| Number of mounting bores | 3 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rotor Style | Solid |
| Rim Hole Number | 5 -Hole |
| Brake Disc Type | solid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.42
Important compatibility info
| Water pump impeller material | Metal |
| Seal Material | Paper |
| Number of Wings | 8 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Additional Information | with gasket/seal |
| Housing material | Cast Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.42
Important compatibility info
| Height | 483 mm |
| Outer diameter | 327 mm |
| Inner diameter | 216 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.42
Important compatibility info
| External Thread Size | M22 x 1,5 |
| Internal Thread Size | M16 x 1,5 |
| Length | 110 mm |
| Width | 102 mm |
| Thickness | 97 mm |
| Function | Relay Valve |
| Type | Relay Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.42
Important compatibility info
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.42
Important compatibility info
| Placement on Vehicle | Front |
| Operating Mode | Pneumatic |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 256 mm |
| Min. Length | 202 mm |
| Pipe Diameter | 38 mm |
| Mounting points diameter | 16 mm |
| Function | Shock Absorber, driver cab suspension |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.43
Important compatibility info
| Function | Repair Kit, suspension strut support mount |
| Material | Aluminium |
| Placement on Vehicle | Front Axle |
| Type | Repair Kit, suspension strut support mount |
| Additional Information 2 | with ball bearing |
Additional Information
Technical Information
If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.43
Important compatibility info
| Function | Pump, fuel pre-supply |
| Internal Thread Size | M14 x 1,5 |
| Type | Pump, fuel pre-supply |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.43
Important compatibility info
| Length | 633 mm |
| Function | Brake Shaft, drum brake |
| Screw length below head | 588 mm |
| Number of Teeth | 10 |
| Outer diameter | 103 mm |
| Type | Brake Shaft, drum brake |
| Paired article numbers | 174141 |
| Placement on Vehicle | Left |
| Rotation Direction | Clockwise rotation |
| Brake Shaft Cam | S-cam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.43
Important compatibility info
| Paired article numbers | 174140 |
| Type | Brake Shaft, drum brake |
| Number of Teeth | 10 |
| Outer diameter | 103 mm |
| Screw length below head | 588 mm |
| Function | Brake Shaft, drum brake |
| Length | 633 mm |
| Placement on Vehicle | Right |
| Rotation Direction | Anticlockwise rotation |
| Brake Shaft Cam | S-cam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.43
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Width | 46.7 mm |
| Outer diameter | 233.8 mm |
| Thickness | 61 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 55.4 mm |
| Max.skimmed drum measure | 204.45 mm |
| Rim Hole Number | 4 -Hole |
| Inner Brake Drum Diameter | 203 mm |
| Type | Brake Drum |
| Function | Brake Drum |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.43
Important compatibility info
| Function | Window Regulator |
| Type | Window Regulator |
| Paired article numbers | 177296 |
| Operating Mode | Electric |
| Additional Information | without electric motor |
| Placement on Vehicle | Right Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.44
Important compatibility info
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 21440 |
| Placement on Vehicle | Front Axle Left, Lower, Front |
| Outer Length | 418 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, with bearing |
| Additional Information | with lock nut |
Additional Information
Technical Information
If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (21219)
£50.45
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 1K0 199 262 AS |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.45
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Material | Rubber/Metal |
| Additional Information 2 | without ball bearing |
| Type | Suspension Strut Support Mount |
| Function | Suspension Strut Support Mount |
Additional Information
Technical Information
If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.45
Important compatibility info
| Width | 47 mm |
| Outer diameter | 170 mm |
| Inner diameter | 110 mm |
| Bearing Type | Tapered Roller Bearing |
| Function | Wheel Bearing |
| Placement on Vehicle | Rear Axle Left, inner, Rear Axle Right |
| Type | Wheel Bearing |
| Bearing Code | 33022 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.45
Important compatibility info
| Tensile Cord Material | Polyester |
| Type | V-Ribbed Belt Set |
| Function | V-Ribbed Belt Set |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 6 |
| Length | 1050 mm |
| Width of castor bearing surface | 25 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (28916)
- 1x Febi Belt Tensioner, v-ribbed belt (31076)
£50.46
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023