Important compatibility info
| Number of Connectors / Ports | 3 | 
| Function | Ignition Coil | 
| Type | Ignition Coil | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Bolt Hole Circle Diameter | 108 mm | 
| Inner diameter | 39 mm | 
| Additional Information 2 | without wheel bearing | 
| Width | 999 mm | 
| Outer diameter | 131.5 mm | 
| Bearing Type | Angular Ball Bearing | 
| Function | Wheel Hub | 
| Type | Wheel Hub | 
| Placement on Vehicle | Front Axle Left, Front Axle Right | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Brake Caliper | 
| Placement on Vehicle | Front Axle Left | 
| Material | Cast Iron | 
| Brake Caliper Type | Brake Caliper (2 pistons) | 
| Paired article numbers | 178205 | 
| Function | Brake Caliper | 
| Brake caliper piston diameter | 43 mm | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Brake Caliper Type | Brake Caliper (1 piston) | 
| Placement on Vehicle | Rear Axle Right | 
| Material | Cast Aluminium | 
| Function | Brake Caliper | 
| Paired article numbers | 181537 | 
| Type | Brake Caliper | 
| Brake caliper piston diameter | 38 mm | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 34 mm | 
| Outer diameter | 69 mm | 
| Type | Tensioner Pulley, timing belt | 
| Function | Tensioner Pulley, timing belt | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with rubber mounts | 
| Placement on Vehicle | Front Axle Left, Lower | 
| Material | Sheet Steel | 
| Steering arm type | Control Arm | 
| Paired article numbers | 173110 | 
| Type | Control/Trailing Arm, wheel suspension | 
| Function | Control/Trailing Arm, wheel suspension | 
| Additional Information 2 | without ball joint | 
| Inner diameter | 16 mm | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Cone Size 2 | 21.5 mm | 
| Placement on Vehicle | Front Axle Right, Lower | 
| Material | Sheet Steel | 
| Steering arm type | Control Arm | 
| Paired article numbers | 173109 | 
| Type | Control/Trailing Arm, wheel suspension | 
| Function | Control/Trailing Arm, wheel suspension | 
| Additional Information 2 | without ball joint | 
| Inner diameter | 16 mm | 
| Additional Information | with rubber mounts | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter 1 | 76 mm | 
| Outer diameter 2 | 148 mm | 
| Placement on Vehicle | Rear Axle Left, Rear Axle Right | 
| Width | 59 mm | 
| Outer diameter | 73 mm | 
| Bearing Type | Angular Ball Bearing | 
| Type | Wheel Bearing Kit | 
| Function | Wheel Bearing Kit | 
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with ABS sensor ring | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rim Hole Number | 5 -Hole | 
| Rotor Style | Solid | 
| Placement on Vehicle | Front Axle | 
| Outer diameter | 298 mm | 
| Thickness | 70.2 mm | 
| Brake Disc Thickness | 14 mm | 
| Minimum thickness | 13 mm | 
| Bolt Hole Circle Diameter | 127 mm | 
| Centering Diameter | 102 mm | 
| Surface | Coated | 
| Type | Brake Disc Rotor | 
| Function | Brake Disc | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left, Lower Front Axle | 
| Additional Information | with lock nut, with rubber mounts | 
| Material | Sheet Steel | 
| Additional Information 2 | with ball joint | 
| Steering arm type | Control Arm | 
| Paired article numbers | 196623 | 
| Cone Size | 16 mm | 
| Type | Control/Trailing Arm, wheel suspension | 
| Function | Control/Trailing Arm, wheel suspension | 
| Cone Size 2 | 22 mm | 
| External Thread Size | M12 x 1,25 | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Aluminium | 
| Opening Temperature | 92 °C. 107 °C | 
| Function | Thermostat, coolant | 
| Type | Thermostat, coolant | 
| Additional Information | with gasket/seal | 
| Housing Type | with housing | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left | 
| Function | Mounting, engine | 
| Bearing/Mounting Type | Hydro Mount | 
| for OE number | 8E0 199 379 BG | 
| External Thread Size | M8 x 1,25 | 
| Type | Mounting, engine | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rim Hole Number | 4 -Hole | 
| Placement on Vehicle | Front Axle | 
| Outer diameter | 241 mm | 
| Thickness | 53 mm | 
| Brake Disc Thickness | 19 mm | 
| Minimum thickness | 17 mm | 
| Bolt Hole Circle Diameter | 100 mm | 
| Centering Diameter | 63 mm | 
| Surface | Coated | 
| Function | Brake Disc | 
| Replaces | 31469 | 
| Type | Brake Disc Rotor | 
| Rotor Style | Internally Vented | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 126 mm | 
| Outer diameter | 48 mm | 
| Function | Joint, propshaft | 
| Type | Joint, propshaft | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Paired article numbers | 184816 | 
| Type | Control/Trailing Arm, wheel suspension | 
| Function | Control/Trailing Arm, wheel suspension | 
| Additional Information | with rubber-metal mounts | 
| Placement on Vehicle | Upper, Rear Axle Left | 
| Steering arm type | Control Arm | 
| Material | Sheet Steel | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rim Hole Number | 5 -Hole | 
| Placement on Vehicle | Rear Axle | 
| Outer diameter | 300 mm | 
| Thickness | 61 mm | 
| Brake Disc Thickness | 10 mm | 
| Minimum thickness | 8.4 mm | 
| Bolt Hole Circle Diameter | 120 mm | 
| Centering Diameter | 75 mm | 
| Surface | Coated | 
| Number of mounting bores | 1 | 
| Function | Brake Disc | 
| Rotor Style | Solid | 
| Type | Brake Disc Rotor | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Bore Diameter | 29 mm | 
| Fill Medium | Brake Fluid | 
| Function | Master Cylinder, clutch | 
| Type | Master Cylinder, clutch | 
| for OE number | 1628218 | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 302 mm | 
| Thickness | 60.1 mm | 
| Brake Disc Thickness | 10 mm | 
| Minimum thickness | 8.4 mm | 
| Bolt Hole Circle Diameter | 114.3 mm | 
| Centering Diameter | 80 mm | 
| Rim Hole Number | 5 -Hole | 
| Number of mounting bores | 1 | 
| Rotor Style | Solid | 
| Surface | Coated | 
| Type | Brake Disc Rotor | 
| Function | Brake Disc | 
| Placement on Vehicle | Rear Axle | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Brake Caliper | 
| Placement on Vehicle | Rear Axle Left | 
| Material | Cast Iron | 
| Brake Caliper Type | Brake Caliper (1 piston) | 
| Paired article numbers | 179241 | 
| Function | Brake Caliper | 
| Brake caliper piston diameter | 34 mm | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 12 V | 
| Number of Connectors / Ports | 2 | 
| Rated Power | 204 W | 
| for OE number | 71735484 | 
| Type | Interior Blower | 
| Function | Interior Blower | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 12 V | 
| Number of Connectors / Ports | 2 | 
| Rated Power | 250 W | 
| Number of Wings | 8 | 
| Function | Fan, engine cooling | 
| Type | Fan, engine cooling | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Spanner Size | 22 | 
| Cable Length | 479 mm | 
| Number of circuits | 4 | 
| Lambda Sensor | Heated | 
| Type | Oxygen Sensor | 
| Function | Oxygen Sensor | 
| External Thread Size | M18 x 1,5 | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Air Filter | 
| Height | 509 mm | 
| Outer diameter | 280 mm | 
| Inner diameter | 151 mm | 
| Filter type | Filter Insert | 
| Type | Air Filter | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 120 mm | 
| Height | 26 mm | 
| Width | 87 mm | 
| Additional Information | with gasket/seal | 
| Bore Diameter | 6 mm | 
| Mounting bores distance | 96 mm. 71 mm | 
| Type | Repair Kit, shift cylinder | 
| Function | Repair Kit, shift cylinder | 
| Internal Thread Size | M6 x 1 | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rod/Strut | Push Rod | 
| Thread Size | M20 x 1,5, M24 x 1,5 | 
| Pipe Diameter | 38 mm | 
| Additional Information 2 | with crown nut | 
| Placement on Vehicle | Front Axle | 
| Adjustable | Adjustable on one side | 
| Cone Size | 26 mm. 30 mm | 
| Extra Description | ProKit | 
| Function | Centre Rod Assembly | 
| Type | Centre Rod Assembly | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Aluminium | 
| Outer diameter | 70 mm | 
| Function | Belt Tensioner, v-ribbed belt | 
| Operating Mode | Automatic | 
| Housing material | Aluminium | 
| Track rollers material | Plastic | 
| Type | Belt Tensioner, v-ribbed belt | 
| Width of castor bearing surface | 26 mm | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | febi Plus | 
| Additional Information | without electric motor | 
| Function | Wiper Linkage | 
| Driver Position | for right-hand drive vehicles | 
| Type | Wiper Linkage | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Parts Set, maintenance service | 
| Type | Parts Set, maintenance service | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Filter (32122)
 - 1x Febi Air Filter (30368)
 - 4x Febi Spark Plug (13536)
 - 1x Febi Fuel filter (17635)
 - 1x Febi Screw Plug, oil sump (04572)
 - 1x Febi Filter, cabin air (32367)
 - 1x Febi Filter, cabin air (11236)
 
Important compatibility info
| Rotor Style | Solid | 
| Placement on Vehicle | Rear Axle | 
| Outer diameter | 258 mm | 
| Thickness | 58 mm | 
| Brake Disc Thickness | 10 mm | 
| Minimum thickness | 8 mm | 
| Bolt Hole Circle Diameter | 114.3 mm | 
| Centering Diameter | 60 mm | 
| Surface | Coated | 
| Number of mounting bores | 2 | 
| Type | Brake Disc Rotor | 
| Function | Brake Disc | 
| Rim Hole Number | 4 -Hole | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left Rear | 
| Material | Rubber/Metal, Aluminium | 
| Bearing/Mounting Type | Rubber-Metal Mount | 
| Function | Mounting, engine | 
| Type | Mounting, engine | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thickness/Strength 1 | 7 mm | 
| Placement on Vehicle | Rear Axle | 
| Inspection Tag | ECE R90 Approved | 
| Outer diameter | 295 mm | 
| Width | 58 mm | 
| Function | Brake Shoe Set | 
| Type | Brake Shoe Set | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 107 mm | 
| Width | 50 mm | 
| Thickness | 81 mm | 
| Number of Connectors / Ports | 2 | 
| Function | Sensor, pneumatic suspension level | 
| Internal Thread Size | M6 x 1 | 
| Type | Sensor, pneumatic suspension level | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Mounting, engine | 
| Placement on Vehicle | Right | 
| Bearing/Mounting Type | Hydro Mount | 
| Type | Mounting, engine | 
| for OE number | 51892723 | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Sensor, exhaust gas temperature | 
| Type | Sensor, exhaust gas temperature | 
| Number of Connectors / Ports | 2 | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Aluminium | 
| Function | Brake Master Cylinder | 
| Type | Brake Master Cylinder | 
| Piston Diameter | 22.2 mm | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 33 mm | 
| Opening Temperature | 95 °C | 
| Type | Thermostat, coolant | 
| Function | Thermostat, coolant | 
| Additional Information | with temperature sensor, with gasket/seal | 
| Housing Type | with housing | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle | 
| Inspection Tag | ECE R90 Approved | 
| Wear Warning Contact | prepared for wear warning indicator | 
| Type | Brake Pad Set, disc brake | 
| Function | Brake Pad Set, disc brake | 
| Thickness/Strength 1 | 18.9 mm | 
| Length | 207.5 mm | 
| Width | 100.3 mm | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Internal Thread Size | M14 x 1,5 | 
| Material | FPM (fluoride rubber) | 
| Function | Hand Feed Pump | 
| Type | Hand Feed Pump | 
| Additional Information 2 | with bolts/screws | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with adjuster | 
| Operating Mode | Electric | 
| Number of Connectors / Ports | 6 | 
| Lock System | with double sealing | 
| Placement on Vehicle | Right Rear | 
| Paired article numbers | 172111 | 
| Type | Door Lock | 
| Function | Door Lock | 
| Extra Description | febi Plus | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower | 
| Material | Steel | 
| Steering arm type | Control Arm | 
| Paired article numbers | 48181 | 
| Function | Control/Trailing Arm, wheel suspension | 
| Additional Information 2 | with ball joint | 
| Type | Control/Trailing Arm, wheel suspension | 
| Additional Information | with rubber mounts | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Hole Spacing | 180 mm | 
| Type | Suspension, propshaft | 
| Function | Suspension, propshaft | 
| Length | 230 mm | 
| Additional Information 2 | with rolling bearing | 
| Inner diameter | 65 mm | 
| Bearing Type | Rolling Bearing | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension | 
| Material | Sheet Steel | 
| Additional Information | with rubber mounts | 
| Steering arm type | Control Arm | 
| Type | Control/Trailing Arm, wheel suspension | 
| Paired article numbers | 188785 | 
| Placement on Vehicle | Front Axle Left | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension | 
| Material | Sheet Steel | 
| Placement on Vehicle | Front Axle Right | 
| Additional Information | with rubber mounts | 
| Steering arm type | Control Arm | 
| Paired article numbers | 188784 | 
| Type | Control/Trailing Arm, wheel suspension | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle | 
| Length | 163.2 mm | 
| Width | 80.8 mm | 
| Additional Information 2 | with anti-squeak plate, with bolts/screws | 
| Wear Warning Contact | with acoustic wear warning | 
| Function | Brake Pad Set, disc brake | 
| Type | Brake Pad Set, disc brake | 
| Thickness/Strength 1 | 18.5 mm | 
| Inspection Tag | ECE R90 Approved | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower | 
| Material | Sheet Steel | 
| Steering arm type | Control Arm | 
| Paired article numbers | 12957 | 
| Function | Control/Trailing Arm, wheel suspension | 
| Type | Control/Trailing Arm, wheel suspension | 
| Additional Information 2 | with ball joint | 
| Additional Information | with crown nut and split pin, with rubber mounts | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Spanner Size | 22 | 
| Cable Length | 628 mm | 
| Number of circuits | 4 | 
| Lambda Sensor | Heated | 
| Type | Oxygen Sensor | 
| Function | Oxygen Sensor | 
| External Thread Size | M18 x 1,5 | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with tensioner element | 
| Type | V-Ribbed Belt Set | 
| Function | V-Ribbed Belt Set | 
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) | 
| Length | 1070 mm | 
| Number of Ribs | 6 | 
| Housing material | Metal | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (37533)
 - 1x Febi Belt Tensioner, v-ribbed belt (178939)
 
Important compatibility info
| Placement on Vehicle | after catalytic converter | 
| Number of Connectors / Ports | 2 | 
| Cable Length | 250 mm | 
| Type | Sensor, exhaust gas temperature | 
| Function | Sensor, exhaust gas temperature | 
| External Thread Size | M14 x 1,5 | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear, both sides | 
| Cable Length | 200 mm | 
| Number of circuits | 12 | 
| Type | Cable Repair Set, door | 
| Function | Cable Repair Set, door | 
| Extra Description | febi Plus | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 76 mm | 
| Operating Mode | Automatic | 
| Housing material | Aluminium | 
| Function | Belt Tensioner, v-ribbed belt | 
| Track rollers material | Metal | 
| Width of castor bearing surface | 28 mm | 
| Type | Belt Tensioner, v-ribbed belt | 
| Material | Metal | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
                  
                
                  
                
                  
                
                  
                
                  
                
                  
                All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































