Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Front Axle, Wheel Side |
| Length | 130 mm |
| Material | Thermoplast |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
| Inner diameter 1 | 23 mm |
| Inner diameter 2 | 81 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (12854)
- 1x Febi Clamping Clip (38757)
- 1x Febi Clamping Clip (45643)
- 1x Febi Molybdenum Grease (02582)
£14.26
Important compatibility info
| Function | Bellow, drive shaft |
| Inner diameter 2 | 88 mm |
| Inner diameter 1 | 27 mm |
| Placement on Vehicle | transmission sided, Front Axle Left, Front Axle Right |
| Length | 107 mm |
| Material | Thermoplast |
| Type | Bellow, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£9.17
Important compatibility info
| Resistor Type | Hot-wire Sensor |
| Function | Mass Air Flow Sensor |
| Length | 66 mm |
| Number of Connectors / Ports | 8 |
| Type | Mass Air Flow Sensor |
| Housing Type | without housing |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.75
Important compatibility info
| Water pump impeller material | Metal |
| Width | 23 mm |
| Number of Teeth | 142 |
| Surface | Coated |
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
| for OE number | 30731727 S1 |
| Belts | with rounded tooth profile |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (27559)
- 1x Febi Water Pump, engine cooling (22145)
£107.55
Important compatibility info
| Placement on Vehicle | transmission sided, Rear Axle |
| Length | 87 mm |
| Material | Thermoplast |
| Paired article numbers | 174400 |
| Inner diameter 1 | 33 mm |
| Inner diameter 2 | 104 mm |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (174397)
- 1x Febi Molybdenum Grease (02582)
£20.78
Important compatibility info
| Function | Joint Kit, drive shaft |
| External Teeth, Wheel Side | 25 |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| Type | Joint Kit, drive shaft |
| ABS Ring Diameter | 90 mm |
| Number of Teeth, ABS ring | 48 |
| Internal Teeth, wheel side | 34 |
| External Thread Size | M24 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£26.87
Important compatibility info
| Function | Filter, cabin air |
| Width | 201 mm |
| Filter type | Pollen Filter |
| Type | Filter, cabin air |
| Length | 225 mm |
| Height | 28 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.63
Important compatibility info
| Placement on Vehicle | Left, Upper |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£45.39
Important compatibility info
| Function | V-Ribbed Belt |
| Length | 1400 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 7 |
| One-sided / Double-sided | Double-sided |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.57
Important compatibility info
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 4 |
| Function | V-Ribbed Belt |
| Length | 1028 mm |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£7.81
Important compatibility info
| Length | 1795 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 8 |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.98
Important compatibility info
| Length | 2835 mm |
| Function | V-Ribbed Belt |
| Number of Ribs | 9 |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.06
Important compatibility info
| Extra Description | ProKit |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Rod/Strut | Coupling Rod |
| Length | 124 mm |
| Material | Steel |
| Spanner Size | 17 |
| Colour | Black |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M10 x 1,25 |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.84
Important compatibility info
| Number of grooves | 4 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Housing material | Grey Cast Iron |
| Seal Material | Rubber |
| Number of Wings | 7 |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| Pulleys | with belt pulley |
| for OE number | 58 0193 1312 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.43
Important compatibility info
| Function | Link/Coupling Rod, stabiliser bar |
| Length | 88 mm |
| Type | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Rod/Strut | Coupling Rod |
| Spanner Size | 17 |
| Material | Steel |
| Additional Information | with nuts |
| Colour | Black |
| External Thread Size | M10 x 1,25 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£26.06
Important compatibility info
| Length | 1440 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 8 |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.53
Important compatibility info
| Number of Wings | 6 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| Pulleys | with belt pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£162.46
Important compatibility info
| Function | Breather Valve, fuel tank |
| Length | 60 mm |
| External Thread Size | M18 x 1,5, M22 x 1,5 |
| Type | Breather Valve, fuel tank |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.59
Important compatibility info
| Placement on Vehicle | Front Axle Left, Rear, inner, Front Axle Right |
| Material | Rubber/Metal |
| Outer diameter | 64 mm |
| Thickness | 70 mm |
| Inner diameter | 12 mm |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.52
Important compatibility info
| Number of Teeth | 38 |
| Extra Description | febi Plus |
| Placement on Vehicle | Intake Side |
| Function | Camshaft Adjuster |
| Type | Camshaft Adjuster |
| Paired article numbers | 178385 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£114.71
Important compatibility info
| Additional Information | with quick coupling |
| for OE number | 5Q0 122 291 DA |
| Type | Coolant Flange |
| Function | Coolant Flange |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£9.48
Important compatibility info
| Function | Oil Pump |
| Type | Oil Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.04
Important compatibility info
| Additional Information 2 | switchable water pump |
| Number of Wings | 7 |
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Metal |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£307.39
Important compatibility info
| Material | Aluminium |
| Type | Brake Master Cylinder |
| Function | Brake Master Cylinder |
| Piston Diameter | 27 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.01
Important compatibility info
| Internal Thread Size | M14 x 1,5 |
| External Thread Size | M10 x 1,25 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.36
Important compatibility info
| Number of Ribs | 7 |
| Function | V-Ribbed Belt |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Length | 1290 mm |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.64
Important compatibility info
| Length | 1420 mm |
| Additional Information 2 | with tensioner element |
| Number of Ribs | 8 |
| Type | V-Ribbed Belt Set |
| Function | V-Ribbed Belt Set |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Track rollers material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (29124)
- 1x Febi Belt Tensioner, v-ribbed belt (21027)
£72.84
Important compatibility info
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Operating Mode | Automatic |
| Width of castor bearing surface | 40 mm |
| for OE number | 906 200 43 70 |
| Outer diameter | 75 mm |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.20
Important compatibility info
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Seal Material | Rubber/Metal, Rubber |
| Number of Wings | 12 |
| Housing material | Grey Cast Iron |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| for OE number | 541 200 14 01 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£134.37
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 104 |
| Function | Chain Kit, oil pump drive |
| Type | Chain Kit, oil pump drive |
| Timing Chain Size | G68V-2 |
| Extra Description | Standard Medium Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Chain, oil pump drive (39971)
- 1x Febi Chain Tensioner, oil pump drive (40294)
- 1x Febi Gear/Sprocket, camshaft (25448)
£140.42
Important compatibility info
| Placement on Vehicle | Intake Side |
| Paired article numbers | 104242 |
| Function | Camshaft Adjuster |
| Extra Description | febi Plus |
| Type | Camshaft Adjuster |
| Additional Information 2 | without screw |
| Number of Teeth | 38 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.35
Important compatibility info
| Placement on Vehicle | Upper |
| Cooling Hose | from thermostat to radiator |
| Function | Radiator Hose |
| Additional Information | with quick coupling |
| Type | Radiator Hose |
| Inner diameter | 34 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.64
Important compatibility info
| Additional Information 2 | non-switchable water pump |
| Additional Information | with gasket/seal |
| Number of grooves | 5 |
| Number of Wings | 9 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Seal Material | Rubber/Metal |
| Housing material | Grey Cast Iron |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.37
Important compatibility info
| Placement on Vehicle | Right |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.82
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 185 mm |
| Width | 80 mm |
| Material | Rubber/Metal |
| Type | Rubber Buffer, suspension |
| Function | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.67
Important compatibility info
| Placement on Vehicle | Centre |
| Function | Charge Air Hose |
| Type | Charge Air Hose |
| Material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.54
Important compatibility info
| Additional Information 2 | with seal ring |
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
| Number of Wings | 6 |
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
| Pulleys | with belt pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.72
Important compatibility info
| Seal Material | Rubber/Metal |
| Additional Information | with gasket/seal |
| Number of Wings | 6 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£67.07
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, Upper |
| Additional Information | with fastening/mounting material |
| Material | Steel |
| Additional Information 2 | with bearing, with ball joint |
| Steering arm type | Control Arm |
| Cone Size | 1 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| External Thread Size | M8 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£42.30
Important compatibility info
| Placement on Vehicle | Cylinder Head Cover |
| Additional Information | with gasket/seal |
| Material | Plastic |
| Colour | black |
| Heating / Cooling | with jiggle pin |
| Type | Cylinder Head Cover |
| Function | Cylinder Head Cover |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£211.37
Important compatibility info
| Length | 1480 mm |
| Number of Ribs | 8 |
| Function | V-Ribbed Belt Set |
| Type | V-Ribbed Belt Set |
| Additional Information 2 | with tensioner element |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (29125)
- 1x Febi Belt Tensioner, v-ribbed belt (21027)
£74.65
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 428 mm |
| Spanner Size | 14 |
| Function | Brake Hose |
| Internal Thread Size | M10 x 1 |
| External Thread Size | M10 x 1 |
| Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.25
Important compatibility info
| Thickness | 25 mm |
| Inner diameter | 20 mm |
| Hole Spacing | 85 mm |
| Placement on Vehicle | Front Axle Left, Rear, Front Axle Right |
| Outer diameter | 45 mm |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
| Internal Thread Size | M14 x 2, M12 x 1,75 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.91
Important compatibility info
| Function | Oil Pump |
| Type | Oil Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£67.51
Important compatibility info
| Housing material | Cast Aluminium |
| Number of Wings | 8 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
| Type | Water Pump, engine cooling |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.75
Important compatibility info
| Rim Hole Number | 4 -Hole |
| Rotor Style | Solid |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 226 mm |
| Thickness | 71.5 mm |
| Brake Disc Thickness | 10 mm |
| Minimum thickness | 8 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 50 mm |
| Surface | Coated |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Additional Information 2 | without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£45.69
Important compatibility info
| Placement on Vehicle | Left |
| Material | Rubber/Metal |
| Paired article numbers | 04695 |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.18
Important compatibility info
| Paired article numbers | 14106 |
| Function | Tie Rod End |
| Internal Thread Size | M14 x 1,5 |
| Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.84
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Tie Rod End |
| External Thread Size | M12 x 1,25 |
| Internal Thread Size | M16 x 1,5 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.23
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.18
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023