Proud to be a UK-based company
Contact us
Important compatibility info
| Height | 110 mm |
| Width | 320 mm |
| Inner diameter | 65 mm |
| Function | Charge Air Hose |
| Type | Charge Air Hose |
| Additional Information 2 | with clamps |
| Placement on Vehicle | Charge Air Cooler, Left |
| Hose Length | 475 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.77
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 125.5 mm |
| Width | 92.3 mm. 109.5 mm |
| Additional Information 2 | with anti-squeak plate |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 18.1 mm. 18.4 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.77
Important compatibility info
| Length | 215 mm |
| Height | 24 mm |
| Width | 105 mm |
| Number of mounting bores | 6 |
| Mounting points diameter | 9.2 mm |
| Function | Thermostat Housing |
| Additional Information | with gasket/seal |
| Type | Thermostat Housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Thermostat Housing (104963)
- 1x Febi Gasket, thermostat housing (107781)
£57.77
Important compatibility info
| Internal Thread Size | M22 x 1,5 |
| Stroke | 90 mm |
| Distance of fastening bolts | 120 mm |
| Piston Rod Thread | M20 x 1,5 |
| Function | Diaphragm Brake Cylinder |
| Type | Diaphragm Brake Cylinder |
| Parameter | Typ 36 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.78
Important compatibility info
| Steering arm type | Control Arm |
| Paired article numbers | 34233 |
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Sheet Steel |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with rubber mount, with ball joint |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (27073)
- 1x Febi Mounting and Bolting Kit, control/trailing arm (34238)
£57.79
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Right |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 180831 |
| Cone Size | 17 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.80
Important compatibility info
| Type | Window Regulator |
| Paired article numbers | 175798 |
| Operating Mode | Electric |
| Additional Information | without electric motor |
| Function | Window Regulator |
| Placement on Vehicle | Left Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.81
Important compatibility info
| Type | Release Fork, clutch |
| Function | Release Fork, clutch |
| for OE number | 74 21 362 933 S2 |
| Additional Information | with bush, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.83
Important compatibility info
| Core Depth | 49 mm |
| Type | Oil Cooler, engine oil |
| Material | Aluminium |
| Function | Oil Cooler, engine oil |
| Core Width | 71 mm |
| Core Length | 14 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.84
Important compatibility info
| Function | Tensioner, timing belt |
| Type | Tensioner, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.84
Important compatibility info
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Rim Hole Number | 5 -Hole |
| Outer diameter | 300 mm |
| Thickness | 56.3 mm |
| Function | Brake Disc |
| Number of mounting bores | 1 |
| Surface | Coated |
| Centering Diameter | 68 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Minimum thickness | 22 mm |
| Brake Disc Thickness | 26 mm |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.85
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower, Rear |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 43741 |
| Outer diameter | 65 mm |
| Function | Control/Trailing Arm, wheel suspension |
| External Thread Size | M14 x 1,5 |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with bearing, with ball joint |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (43734)
- 1x Febi Nut (43739)
£57.85
Important compatibility info
| Rim Hole Number | 6 -Hole |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 296 mm |
| Thickness | 38 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.85
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 308 mm |
| Thickness | 42 mm |
| Brake Disc Thickness | 25 mm |
| Minimum thickness | 22 mm |
| Bolt Hole Circle Diameter | 110 mm |
| Centering Diameter | 70 mm |
| Surface | Coated |
| Number of mounting bores | 3 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.87
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 122 |
| Timing Chain Size | G68HR |
| Function | Timing Chain |
| Additional Information 2 | Requires special tools for mounting |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.87
Important compatibility info
| Inner Brake Drum Diameter | 300 mm |
| Number of pads | 8 |
| Function | Brake Lining, drum brake |
| Type | Brake Lining, drum brake |
| Width | 200 mm |
| Placement on Vehicle | Rear Axle |
| Number of Holes | 8 |
| Inspection Tag | ECE R90 Approved |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.87
Important compatibility info
| Placement on Vehicle | Front Axle Right, outer |
| Length | 325 mm |
| Diameter | 1 mm |
| Material | Steel |
| Thickness | 360 mm |
| Spanner Size | 18 |
| Rod/Strut | Coupling Rod |
| Thread Length | 22 mm |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M12 x 1,5 |
| Paired article numbers | 193718 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.87
Important compatibility info
| Placement on Vehicle | Front Axle Left, outer |
| Length | 325 mm |
| Diameter | 1 mm |
| Material | Steel |
| Thickness | 360 mm |
| Spanner Size | 18 |
| Paired article numbers | 183957 |
| Rod/Strut | Coupling Rod |
| Thread Length | 22 mm |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.87
Important compatibility info
| Voltage | 12 V |
| Number of Connectors / Ports | 2 |
| Rated Power | 228 W |
| Type | Interior Blower |
| Function | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.87
Important compatibility info
| Function | Drive Shaft |
| Thread Size | M22x1,5 |
| Additional Information 2 | with nut |
| Placement on Vehicle | Front Axle Left |
| Min. Length | 675 mm |
| Wheel Sided Joint Diameter | 91 mm |
| Type | Drive Shaft |
| Paired article numbers | 181213 |
| External Teeth, Wheel Side | 27 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.88
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| for OE number | 51932522 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.89
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle Left, Upper, Front Axle Right |
| Material | Cast Steel |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Cone Size | 18 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with lock nut, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.89
Important compatibility info
| Inner diameter | 35 mm |
| Width | 36 mm |
| Thickness | 106 mm |
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Additional Information 2 | with ball bearing |
| Hole Spacing | 145 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension, propshaft (186476)
- 1x Febi Bearing, propshaft centre bearing (21311)
£57.89
Important compatibility info
| Placement on Vehicle | Front, both sides |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.89
Important compatibility info
| Type | Slave Cylinder, clutch |
| Function | Slave Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.91
Important compatibility info
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Cooling Hose | from heat exchanger to engine |
| Hose Length | 950 mm |
| Function | Radiator Hose |
| Additional Information 2 | with quick couplers |
| Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.91
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (47013)
- 1x Febi Camber Correction Screw (37216)
£57.92
Important compatibility info
| Replaces | 35579; 46132 |
| Operating Mode | Electric-pneumatic |
| Voltage | 24 V |
| Frequency Range | 400 Hz |
| Noise Level | 118 dB |
| Type | Trumpet Horn |
| Function | Trumpet Horn |
| Power Consumption | 30 W |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.92
Important compatibility info
| Bolt Hole Circle Diameter | 108 mm |
| Inner diameter | 39 mm |
| Additional Information 2 | without wheel bearing |
| Width | 999 mm |
| Outer diameter | 131.5 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Hub |
| Type | Wheel Hub |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.92
Important compatibility info
| Spanner Size | 22 |
| Cable Length | 803 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.92
Important compatibility info
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
| for OE number | 44 23 144 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.93
Important compatibility info
| Material | Cast Iron |
| Function | Brake Caliper |
| Type | Brake Caliper |
| Brake caliper piston diameter | 34 mm |
| Placement on Vehicle | Rear Axle Left |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 182250 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.94
Important compatibility info
| Brake caliper piston diameter | 34 mm |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 182249 |
| Function | Brake Caliper |
| Type | Brake Caliper |
| Material | Cast Iron |
| Placement on Vehicle | Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.94
Important compatibility info
| Additional Information | with gasket/seal |
| Type | Thermostat Housing |
| Function | Thermostat Housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.94
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Material | Sheet Steel |
| Additional Information 2 | with bearing |
| Steering arm type | Control Arm |
| Paired article numbers | 182069 |
| Type | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Rear Axle Right, Upper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.94
Important compatibility info
| External Thread Size | M10 x 1,25 |
| Placement on Vehicle | Front |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Max. Length | 258 mm |
| Min. Length | 203 mm |
| Pipe Diameter | 49 mm. 60 mm |
| Mounting points diameter | 30 mm |
| Piston conrod diameter | 14 mm |
| Function | Shock Absorber, driver cab suspension |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.95
Important compatibility info
| Type | Mounting, engine |
| Function | Mounting, engine |
| Placement on Vehicle | Left |
| Bearing/Mounting Type | Rubber-Metal Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.95
Important compatibility info
| Function | Brake Master Cylinder |
| Type | Brake Master Cylinder |
| Material | Cast Iron |
| Piston Diameter | 20.6 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.95
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 1K0 199 262 AM |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.97
Important compatibility info
| Additional Information 2 | with bolts/screws, with washers |
| Extra Description | ProKit |
| Outer diameter | 140 mm |
| Thickness | 32 mm |
| Bolt Hole Circle Diameter | 90 mm |
| Type | Joint, propshaft |
| Function | Joint, propshaft |
| Additional Information | with nuts |
| Number of Holes | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (101355)
- 3x Febi Screw (109455)
- 3x Febi Screw (109454)
- 6x Febi Nut (19104)
- 3x Febi Washer (19107)
£57.97
Important compatibility info
| Housing material | Cast Aluminium |
| Number of Wings | 6 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
| Type | Water Pump, engine cooling |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.97
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Min. Length | 800 mm |
| Thread Size | M20x1,5 |
| External Teeth, Wheel Side | 21 |
| External Teeth, Diff.Side | 22 |
| Function | Drive Shaft |
| Wheel Sided Joint Diameter | 84 mm |
| Transmission-side joint diameter | 67.6 mm |
| Type | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.98
Important compatibility info
| Function | Gasket Set, wheel hub |
| Placement on Vehicle | Rear Axle |
| Type | Gasket Set, wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Shaft Seal, drive shaft (38541)
- 1x Febi Shaft Seal, wheel hub (24758)
- 1x Febi Ring, wheel hub (04455)
- 1x Febi Thrust Washer, external planetary gearbox (21951)
- 1x Febi Seal Ring, wheel hub (08008)
- 1x Febi Gasket, external planetary gearbox (08009)
- 1x Febi Gasket, external planetary gearbox (08010)
- 1x Febi Gasket, external planetary gearbox (08011)
- 1x Febi Toothed Disc, external planetary gearbox (08488)
- 1x Febi Sensor Ring, ABS (18612)
£57.99
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Material | Rubber/Metal |
| Additional Information 2 | without ball bearing |
| Type | Suspension Strut Support Mount |
| Function | Suspension Strut Support Mount |
| External Thread Size | M10 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.99
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Bore Diameter | 12 mm. 15 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Telescopic Shock Absorber |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Mounting bores distance | 611 mm |
| Max. Length | 611 mm |
| Min. Length | 369 mm |
| Pipe Diameter | 53 mm. 45 mm |
| Piston conrod diameter | 12.5 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.99
Important compatibility info
| Width | 323 mm |
| Height | 46 mm |
| Length | 485 mm |
| Function | Hydraulic Filter Kit, automatic transmission |
| Additional Information 2 | with oil sump gasket |
| Type | Hydraulic Filter Kit, automatic transmission |
| Filter type | Screen Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.00
Important compatibility info
| Rotor Style | Internally Vented |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 315 mm |
| Thickness | 48 mm |
| Brake Disc Thickness | 23 mm |
| Minimum thickness | 21.5 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 67.4 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.02
Important compatibility info
| Placement on Vehicle | Right |
| Length | 378 mm |
| Width | 193 mm |
| Thickness | 35 mm |
| Voltage | 24 V |
| Outer/Inner Mirror | Heatable, for electric mirror adjustment, Convex |
| Type | Mirror Glass, exterior mirror |
| Camber Radius | 1200 mm |
| Function | Mirror Glass, exterior mirror |
| Extra Description | febi Plus |
| Manufacturer | Mekra Lang |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.02
Important compatibility info
| Width | 200 mm |
| Length | 516 mm |
| Thickness | 11 mm |
| Function | Gasket, cylinder head cover |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.03
Important compatibility info
| Type | Hub, crankshaft |
| Function | Hub, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.04
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023