Important compatibility info
| Thread Size | M22x1,5 |
| Function | Drive Shaft |
| Additional Information 2 | with nut |
| Placement on Vehicle | Front Axle Left |
| Type | Drive Shaft |
| Transmission-side joint diameter | 81.6 mm |
| Wheel Sided Joint Diameter | 83 mm |
| Min. Length | 629 mm |
| External Teeth, Diff.Side | 26 |
| Paired article numbers | 181565 |
| External Teeth, Wheel Side | 27 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Core Width | 160 mm |
| Core Depth | 26 mm |
| Function | Heat Exchanger, interior heating |
| Core Length | 190 mm |
| Additional Information | with gasket/seal |
| Type | Heat Exchanger, interior heating |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Aluminium |
| Type | Oil Cooler, engine oil |
| Function | Oil Cooler, engine oil |
| Core Length | 80 mm |
| Core Width | 80 mm |
| Core Depth | 42 mm |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Oil Line, charger |
| Forward- /Backflow | Supply Line |
| Function | Oil Line, charger |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Manufacturer | Aspöck |
| Placement on Vehicle | Right |
| Length | 173 mm |
| Voltage | 24 V |
| Paired article numbers | 193012 |
| Port / Connector type | PRS |
| Number of Connectors / Ports | 2 |
| Mounting bores distance | 78.4 mm |
| Light Design | LED |
| Cable Length | 1250 mm |
| Manufacturer Release | ADR Zone 2 |
| Protection Type (IP Code) | IP69K |
| Type | End Outline Marker Light |
| Fulfils ECE norm | R7, R10, R91 |
| Function | End Outline Marker Light |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Manufacturer | Aspöck |
| Placement on Vehicle | Left |
| Length | 173 mm |
| Voltage | 24 V |
| Paired article numbers | 193009 |
| Port / Connector type | PRS |
| Number of Connectors / Ports | 2 |
| Mounting bores distance | 78.4 mm |
| Light Design | LED |
| Cable Length | 1250 mm |
| Manufacturer Release | ADR Zone 2 |
| Protection Type (IP Code) | IP69K |
| Type | End Outline Marker Light |
| Fulfils ECE norm | R7, R10, R91 |
| Function | End Outline Marker Light |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | after soot particulate filter |
| Number of Connectors / Ports | 2 |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left |
| Height | 139 mm |
| Width | 525 mm |
| Paired article numbers | 194124 |
| Port / Connector type | AMP 7 pin |
| Number of Connectors / Ports | 7 |
| Light Function | with taillight, with indicator, with stop light, with rear fog light, with reverse light, with side marker light, with licence plate light |
| Depth | 81 mm |
| Type | Tail Light Assembly |
| Fulfils ECE norm | R4, R6, R7, R9, R38, R23, R91 |
| Function | Tail Light Assembly |
| Voltage | 24 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 24 V |
| Placement on Vehicle | Right |
| Height | 139 mm |
| Width | 525 mm |
| Paired article numbers | 194120 |
| Port / Connector type | AMP 7 pin |
| Number of Connectors / Ports | 7 |
| Light Function | with taillight, with indicator, with stop light, with rear fog light, with reverse light, with side marker light, without licence plate light |
| Depth | 81 mm |
| Type | Tail Light Assembly |
| Fulfils ECE norm | R6, R7, R9, R38, R23, R91 |
| Function | Tail Light Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Rubber/Metal |
| Outer diameter | 99.2 mm |
| Function | Bushing, axle beam |
| Thickness | 138 mm |
| Inner diameter | 17 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with switch |
| Number of Connectors / Ports | 3 |
| Type | Steering Lock |
| Function | Steering Lock |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 93.5 mm |
| Outer diameter | 142 mm |
| Additional Information 2 | without wheel bearing |
| Bolt Hole Circle Diameter | 114 mm |
| Type | Wheel Hub |
| Function | Wheel Hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with bolts/screws |
| Outer diameter | 169 mm |
| Thickness | 29.5 mm |
| Inner diameter | 31 mm |
| Number of Holes | 4 |
| Number of Ribs | 5 |
| Surface | Zinc-coated |
| Parameter | 6PK |
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 32.5 mm. 37.7 mm |
| Outer diameter | 52 mm. 52.5 mm |
| Inner diameter | 17 mm |
| Number of Ribs | 5 |
| Function | Alternator Freewheel Clutch |
| Additional Information 2 | with lid |
| Type | Alternator Freewheel Clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 1035 mm |
| Number of Connectors / Ports | 2 |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Cone Size | 32 mm |
| Pipe Diameter | 36 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Placement on Vehicle | Rear Axle, non-steered trailing axle, non-steered leading axle, steered leading axle, Steered trailing axle |
| Length | 380 mm |
| Rod/Strut | Coupling Rod |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rotor Style | perforated/vented |
| Surface | Coated |
| Placement on Vehicle | Front Axle Left |
| Outer diameter | 315 mm |
| Thickness | 69 mm |
| Brake Disc Thickness | 28 mm |
| Bolt Hole Circle Diameter | 130 mm |
| Centering Diameter | 98 mm |
| Paired article numbers | 108214 |
| Number of mounting bores | 2 |
| Machining | High-carbon |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Minimum thickness | 26 mm |
Additional Information
Technical Information
Attention, this is a sided brake disc.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rotor Style | perforated/vented |
| Placement on Vehicle | Front Axle Right |
| Outer diameter | 315 mm |
| Thickness | 69 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26 mm |
| Bolt Hole Circle Diameter | 130 mm |
| Centering Diameter | 98 mm |
| Paired article numbers | 108213 |
| Surface | Coated |
| Number of mounting bores | 2 |
| Machining | High-carbon |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
Additional Information
Technical Information
Attention, this is a sided brake disc.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Placement on Vehicle | Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Mounting, engine |
| for OE number | 21930-1H050 |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Placement on Vehicle | Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Rear |
| for OE number | 51728302 |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 12 V |
| Function | Pressure converter, turbocharger |
| Operating Mode | Electric-pneumatic |
| Number of Connectors / Ports | 2 |
| Type | Pressure converter, turbocharger |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Vacuum Pump, braking system |
| Type | Vacuum Pump, braking system |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Housing material | Cast Aluminium |
| Number of Wings | 6 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
| Type | Water Pump, engine cooling |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Repair Kit, suspension strut support mount |
| Placement on Vehicle | Front Axle |
| Material | Rubber/Metal |
| Additional Information 2 | with fastening material, with ball bearing |
| Type | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Cast Aluminium |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 180305 |
| Placement on Vehicle | Rear Axle Left |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 34 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Ribs | 6 |
| Inner diameter | 17 mm |
| Outer diameter | 58 mm |
| Additional Information 2 | with lid |
| Function | Alternator Freewheel Clutch |
| Type | Alternator Freewheel Clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 124 |
| Timing Chain Size | G53RT, G53RING-1, G53RING-2 |
| Function | Timing Chain |
| Additional Information 2 | Requires special tools for mounting |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 70 mm |
| Inner diameter | 60 mm |
| Function | Charge Air Hose |
| Additional Information 2 | with clamp |
| Type | Charge Air Hose |
| Additional Information | with quick coupling |
| Hose Length | 255 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rotor Style | Solid |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 272 mm |
| Thickness | 83.2 mm |
| Brake Disc Thickness | 10 mm |
| Minimum thickness | 8.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 75 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
| Surface | Coated |
| Number of Teeth | 109 |
| Width | 25 mm |
| Belts | with rounded tooth profile |
| Water pump impeller material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (32396)
- 1x Febi Water Pump, engine cooling (26306)
Important compatibility info
| Placement on Vehicle | Left |
| Material | Aluminium |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, manual transmission |
| Type | Mounting, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 280 mm |
| Thickness | 43.9 mm |
| Brake Disc Thickness | 24 mm |
| Minimum thickness | 22 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Upper |
| Additional Information | with rubber-metal mounts |
| Material | Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 195000 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Mounting, engine |
| Placement on Vehicle | Rear, Lower |
| Material | Aluminium |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Control Valve, camshaft adjustment |
| Function | Control Valve, camshaft adjustment |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Brake Lining, drum brake |
| Type | Brake Lining, drum brake |
| Width | 220 mm |
| Number of pads | 8 |
| Placement on Vehicle | Rear Axle |
| Number of Holes | 8 |
| Inner Brake Drum Diameter | 410 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 12 V |
| Operating Mode | Electric-pneumatic |
| Number of Connectors / Ports | 2 |
| Extra Description | febi Plus |
| Type | Pressure Converter, exhaust control |
| Function | Pressure Converter, exhaust control |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | febi Plus |
| Additional Information | with gasket/seal, with oil filter, with oil cooler |
| Type | Housing, oil filter |
| Function | Housing, oil filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left Front |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rotor Style | Solid |
| Placement on Vehicle | Front Axle |
| Outer diameter | 273 mm |
| Thickness | 63.3 mm |
| Brake Disc Thickness | 12.7 mm |
| Minimum thickness | 10.6 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 69.6 mm |
| Surface | Coated |
| Number of mounting bores | 5 |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 11753 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with holder, with rubber mounts |
| Additional Information 2 | without ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Oxygen Sensor |
| Cable Length | 400 mm |
| Lambda Sensor | Heated |
| Placement on Vehicle | before catalytic converter |
| External Thread Size | M18 x 1,5 |
| Function | Oxygen Sensor |
| Number of circuits | 4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 230 mm |
| Thickness | 121 mm |
| Width | 45 mm |
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension, propshaft (30935)
Important compatibility info
| Placement on Vehicle | before catalytic converter |
| Function | Oxygen Sensor |
| Spanner Size | 22 |
| Type | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
| Cable Length | 250 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width of castor bearing surface | 24 mm |
| Outer diameter | 60 mm |
| Operating Mode | Automatic |
| Type | Belt Tensioner, v-ribbed belt |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Outer diameter | 70 mm |
| Material | Metal |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Width of castor bearing surface | 29 mm |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rotor Style | Solid |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 302 mm |
| Thickness | 58.7 mm |
| Brake Disc Thickness | 10 mm |
| Minimum thickness | 8.4 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 80 mm |
| Surface | Coated |
| Number of mounting bores | 3 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 282 mm |
| Thickness | 46 mm |
| Brake Disc Thickness | 25 mm |
| Minimum thickness | 22 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 62 mm |
| Surface | Coated |
| Function | Brake Disc |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































