Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 44379 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.25
Important compatibility info
| Additional Information | with rubber mounts |
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 44378 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.25
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 602 mm |
| Housing Diameter | 19 mm |
| Eject Force | 525 N |
| Stroke | 201 mm |
| Mounting points diameter | 17.8 mm |
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, boot/cargo area |
| Function | Gas Spring, boot/cargo area |
| Housing length | 344.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.25
Important compatibility info
| Additional Information | with fastening/mounting material, with gaskets/seals |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.28
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 803 mm |
| Additional Information | with nuts |
| Rod/Strut | Push Rod |
| Cone Size | 22 mm |
| Pipe Diameter | 38 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.28
Important compatibility info
| Placement on Vehicle | Rear |
| Length | 132 mm |
| Outer diameter | 132 mm |
| Thickness | 32 mm |
| Bolt Hole Circle Diameter | 96 mm |
| Type | Joint, propshaft |
| Function | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.28
Important compatibility info
| Additional Information 2 | with screw |
| Width | 29 mm |
| Outer diameter | 153 mm |
| Inner diameter | 30 mm |
| Number of Ribs | 5 |
| Parameter | 6PK |
| Function | Belt Pulley, crankshaft |
| Extra Description | ProKit |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (27722)
- 1x Febi Pulley Bolt (33675)
£63.29
Important compatibility info
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle Left |
| Outer diameter | 348 mm |
| Thickness | 66.5 mm |
| Brake Disc Thickness | 36 mm |
| Minimum thickness | 34.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 75 mm |
| Paired article numbers | 104950 |
| Surface | Coated |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
Additional Information
Technical Information
Attention, this is a sided brake disc.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.29
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle Right |
| Outer diameter | 348 mm |
| Thickness | 66.5 mm |
| Brake Disc Thickness | 36 mm |
| Minimum thickness | 34.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 75 mm |
| Paired article numbers | 104949 |
| Surface | Coated |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
Technical Information
Attention, this is a sided brake disc.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.29
Important compatibility info
| Brake caliper piston diameter | 38 mm |
| Paired article numbers | 181663 |
| Function | Brake Caliper |
| Type | Brake Caliper |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Material | Cast Aluminium |
| Placement on Vehicle | Rear Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.29
Important compatibility info
| Material | Cast Aluminium |
| Placement on Vehicle | Rear Axle Right |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 38 mm |
| Paired article numbers | 181662 |
| Brake Caliper Type | Brake Caliper (1 piston) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.29
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 297 mm |
| Thickness | 52.5 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.30
Important compatibility info
| Function | Master Cylinder, clutch |
| Fill Medium | Brake Fluid |
| Driver Position | for right-hand drive vehicles |
| Bore Diameter | 16 mm |
| Type | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.31
Important compatibility info
| Material | Metal |
| Operating Mode | Automatic |
| Type | Vibration Damper, v-ribbed belt |
| Function | Vibration Damper, V-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.31
Important compatibility info
| Additional Information 2 | Requires special tools for mounting |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 132 |
| Timing Chain Size | G68HR |
| Function | Timing Chain |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.31
Important compatibility info
| Placement on Vehicle | Right |
| Additional Information | with adjuster |
| Operating Mode | Electric |
| Number of Connectors / Ports | 8 |
| Type | Back Door Lock |
| Function | Back Door Lock |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.31
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Upper |
| Steering arm type | Triangular Control Arm (CV) |
| Material | Aluminium |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 183403 |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.32
Important compatibility info
| Steering arm type | Triangular Control Arm (CV) |
| Material | Aluminium |
| Placement on Vehicle | Rear Axle Right, Upper |
| Additional Information | with rubber mounts |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 183402 |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.32
Important compatibility info
| Material | Plastic |
| Additional Information 2 | with bolts/screws |
| Operating Mode | Pneumatic |
| Number of Connectors / Ports | 3 |
| Type | Actuator, seat adjustment |
| Function | Actuator, seat adjustment |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.32
Important compatibility info
| Function | Thermostat, coolant |
| Outer diameter | 36 mm |
| Opening Temperature | 87 °C |
| Type | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.32
Important compatibility info
| Additional Information 2 | with nut |
| Thread Size | M24x1,5 |
| External Teeth, Diff.Side | 24 |
| Additional Information | with Split Pin |
| Placement on Vehicle | Front Axle Left |
| Function | Drive Shaft |
| Min. Length | 590 mm |
| ABS Ring Diameter | 90 mm |
| Wheel Sided Joint Diameter | 86 mm |
| Transmission-side joint diameter | 76 mm |
| Type | Drive Shaft |
| Paired article numbers | 180790 |
| External Teeth, Wheel Side | 25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.33
Important compatibility info
| Length | 865 mm |
| Pipe Diameter | 48 mm |
| Placement on Vehicle | Front Axle |
| Rod/Strut | Push Rod |
| Adjustable | Adjustable on one side |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Cone Size | 28.9 mm |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.33
Important compatibility info
| Inner length 1 | 648 mm |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Outer length 1 | 970 mm |
| Inner length 2 | 530 mm |
| Driver Position | for right-hand drive vehicles |
| Outer length 2 | 850 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.34
Important compatibility info
| Function | Brake Pad Set, disc brake |
| Placement on Vehicle | Front Axle, Rear Axle |
| Length | 249.3 mm |
| Width | 111.2 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 29 mm |
| Additional Information 2 | with fastening material |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.35
Important compatibility info
| Number of Chain Links | 106 |
| Timing Chain Size | D67ZN |
| Chain Type | Duplex, with chain lock |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
| for OE number | 102 050 10 11 S5 |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (09231)
- 1x Febi Tensioner, timing chain (01050)
£63.35
Important compatibility info
| Internal Thread Size | M22 x 1,5 |
| Length | 411 mm |
| Function | Air Tank, compressed-air system |
| Type | Air Tank, compressed-air system |
| Number of Connectors / Ports | 4 |
| Outer diameter | 276 mm |
| Operating Pressure | 15.5 bar |
| Material | Steel |
| Capacity | 20 l |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.35
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Function | Gasket Set, external planetary gearbox |
| Type | Gasket Set, external planetary gearbox |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Shaft Seal, external planetary gearbox (17547)
- 1x Febi Toothed Disc, external planetary gearbox (08488)
- 1x Febi Ring, wheel hub (04454)
- 1x Febi Thrust Washer, external planetary gearbox (24759)
- 1x Febi Sensor Ring, ABS (18612)
£63.36
Important compatibility info
| Cable Length | 490 mm |
| Number of circuits | 4 |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
| Type | Oxygen Sensor |
| Lambda Sensor | Heated |
| Spanner Size | 22 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.36
Important compatibility info
| Material | Aluminium |
| Placement on Vehicle | Front Axle Left, Upper, Front Axle Right |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| External Thread Size | M12 x 1,5 |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts, with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (30907)
- 1x Febi Nut (39199)
£63.37
Important compatibility info
| Type | Window Regulator |
| Function | Window Regulator |
| Placement on Vehicle | Left Front |
| Additional Information | with fastening/mounting material |
| Operating Mode | Manual |
| Paired article numbers | 182168 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.37
Important compatibility info
| External Teeth, Wheel Side | 36 |
| Thread Size | M16 x 1,5 |
| Additional Information 2 | with bolts/screws |
| Transmission-side joint diameter | 107.8 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Placement on Vehicle | Front Axle Right |
| Min. Length | 794 mm |
| Wheel Sided Joint Diameter | 90.9 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.37
Important compatibility info
| Function | Drive Shaft |
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with nut |
| External Teeth, Wheel Side | 36 |
| Min. Length | 546 mm |
| Wheel Sided Joint Diameter | 89 mm |
| Transmission-side joint diameter | 107.7 mm |
| Type | Drive Shaft |
| External Thread Size | M20 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.37
Important compatibility info
| Operating Mode | Manual |
| Placement on Vehicle | Right Front |
| Paired article numbers | 182169 |
| Type | Window Regulator |
| Function | Window Regulator |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.37
Important compatibility info
| Additional Information 2 | Requires special tools for mounting |
| Number of Chain Links | 138 |
| Chain Type | Silent Chain, Closed chain |
| Function | Timing Chain |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.38
Important compatibility info
| for OE number | 20889546 SK3 |
| Type | Sealing Set, air compressor |
| Function | Sealing Set, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.38
Important compatibility info
| Rotation Direction | Clockwise rotation |
| Screw length below head | 325 mm |
| Length | 731 mm |
| Function | Brake Shaft, drum brake |
| Type | Brake Shaft, drum brake |
| Paired article numbers | 179420 |
| Placement on Vehicle | Left Front |
| Number of Teeth | 26 |
| Outer diameter | 97 mm |
| Brake Shaft Cam | S-cam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.39
Important compatibility info
| Type | Brake Shaft, drum brake |
| Number of Teeth | 26 |
| Length | 731 mm |
| Outer diameter | 97 mm |
| Screw length below head | 325 mm |
| Paired article numbers | 179419 |
| Placement on Vehicle | Right Front |
| Rotation Direction | Anticlockwise rotation |
| Function | Brake Shaft, drum brake |
| Brake Shaft Cam | S-cam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.39
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Thread Size | M20x1,5 |
| External Teeth, Wheel Side | 23 |
| External Teeth, Diff.Side | 23 |
| Min. Length | 727 mm |
| Wheel Sided Joint Diameter | 84 mm |
| Transmission-side joint diameter | 78.6 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.39
Important compatibility info
| Placement on Vehicle | Left Rear, Right Rear |
| Length | 643 mm |
| Height | 329 mm |
| Width | 694 mm |
| Type | Wing |
| Function | Wing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.39
Important compatibility info
| Function | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Placement on Vehicle | Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.40
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 96 mm |
| Inner diameter | 45 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
| Additional Information | with axle nut |
| Width | 112 mm |
| Bolt Hole Circle Diameter | 160 mm |
| Outer diameter 1 | 65 mm |
| Outer diameter 2 | 193 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.41
Important compatibility info
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
| Inner diameter | 32 mm |
| Bearing Type | Tapered Roller Bearing |
| Type | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Outer diameter 1 | 68 mm |
| Outer diameter | 89 mm |
| Width | 69 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Additional Information | with axle nut |
| Outer diameter 2 | 148 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.41
Important compatibility info
| Outer diameter | 61 mm |
| Inner diameter | 17 mm |
| Number of Ribs | 5 |
| Function | Alternator Freewheel Clutch |
| Additional Information 2 | with lid |
| Type | Alternator Freewheel Clutch |
| for OE number | 038 903 119 P |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.42
Important compatibility info
| Number of Connectors / Ports | 2 |
| Type | Sensor, exhaust gas temperature |
| Cable Length | 230 mm |
| Placement on Vehicle | before soot particulate filter |
| Function | Sensor, exhaust gas temperature |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.42
Important compatibility info
| Housing material | Aluminium |
| Track rollers material | Metal |
| Function | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 32 mm |
| Operating Mode | Automatic |
| Outer diameter | 85 mm |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.42
Important compatibility info
| Outer diameter | 106 mm |
| Inner diameter | 39 mm |
| Bolt Hole Circle Diameter | 79 mm |
| Thickness | 32 mm |
| Function | Joint, propshaft |
| Placement on Vehicle | Rear |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.43
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 515 mm |
| Housing length | 314.5 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
| Piston conrod diameter | 8 mm |
| Mounting points diameter | 18 mm |
| Stroke | 157 mm |
| Eject Force | 710 N |
| Housing Diameter | 22 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.44
Important compatibility info
| Outer diameter | 155 mm |
| Inner diameter | 27 mm |
| Thickness | 155 mm |
| Function | Belt Pulley, crankshaft |
| Parameter | 6PK |
| Number of Ribs | 5 |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.45
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 274 mm |
| Thickness | 51 mm |
| Brake Disc Thickness | 28.2 mm |
| Minimum thickness | 26 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 72 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.45
Important compatibility info
| Number of Chain Links | 146 |
| Function | Timing Chain |
| Weight | 0.252 kg |
| Type | Timing Chain |
| Additional Information 2 | Requires special tools for mounting |
£63.46
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023