Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Material | Cast Iron |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 38 mm |
| Paired article numbers | 184702 |
| Brake Caliper Type | Brake Caliper (1 piston) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.85
Important compatibility info
| Colour | Black |
| Function | Expansion Tank, coolant |
| Type | Expansion Tank, coolant |
| Additional Information | with coolant level sensor |
| Additional Information 2 | without lid |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.86
Important compatibility info
| Bearing/Mounting Type | Hydro Mount |
| Placement on Vehicle | Right |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 205 240 03 00 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.89
Important compatibility info
| Length | 105.3 mm |
| Width | 62 mm. 58 mm |
| Function | Solenoid Valve, retarder |
| Voltage | 24 V |
| Inner diameter | 8.6 mm |
| Number of Holes | 2 |
| Internal Thread Size | M16 x 1,5 |
| Type | Solenoid Valve, retarder |
| Hole Spacing | 42 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.89
Important compatibility info
| Type | Auxiliary water pump (cooling water circuit) |
| Function | Auxiliary water pump (cooling water circuit) |
| Number of Connectors / Ports | 3 |
| Material | Plastic |
| Water pump impeller material | Plastic |
| Voltage | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.90
Important compatibility info
| Wheel Sided Joint Diameter | 88.9 mm |
| Placement on Vehicle | Front Axle Right |
| Transmission-side joint diameter | 82.3 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Min. Length | 922 mm |
| External Teeth, Diff.Side | 26 |
| External Teeth, Wheel Side | 36 |
| Paired article numbers | 180786 |
| Thread Size | M10x1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.91
Important compatibility info
| Function | Housing, oil filter |
| Extra Description | febi Plus |
| Type | Housing, oil filter |
| Additional Information | with gasket/seal, with oil filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.91
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Placement on Vehicle | Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.91
Important compatibility info
| Spanner Size | 22 |
| Cable Length | 600 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.94
Important compatibility info
| Number of Connectors / Ports | 4 |
| Number of circuits | 4 |
| Cable Length | 640 mm |
| External Thread Size | M18 x 1,5 |
| Function | Oxygen Sensor |
| Type | Oxygen Sensor |
| Lambda Sensor | Heated |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.94
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| for OE number | 5WA 199 262 BB |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Placement on Vehicle | Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.94
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 102987 |
| Steering arm type | Control Arm |
| Material | Aluminium |
| Placement on Vehicle | Front Axle Right, Lower, Rear |
| External Thread Size | M14 x 1,5 |
| Outer diameter | 75 mm |
| Additional Information | with hydro mount |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.95
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Cable Length | 680 mm |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
| Number of Connectors / Ports | 2 |
| Placement on Vehicle | Exhaust Manifold |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.96
Important compatibility info
| Length | 223 mm |
| Additional Information 2 | with ball bearing |
| Inner diameter | 47 mm |
| Bearing Type | Ball Bearing |
| Type | Suspension, propshaft |
| Function | Suspension, propshaft |
| Hole Spacing | 194.2 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.96
Important compatibility info
| Housing length | 152 mm |
| Mounting points diameter | 10 mm |
| Length | 253 mm |
| Eject Force | 1900 N |
| Stroke | 67 mm |
| Housing Diameter | 35 mm |
| Piston conrod diameter | 10 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.97
Important compatibility info
| Voltage | 12 V |
| Rated Power | 1.3 kW |
| Number of Teeth | 9 |
| Function | Starter |
| Type | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.97
Important compatibility info
| Placement on Vehicle | Front Axle, Rear Axle |
| Thickness/Strength 1 | 5.4 mm |
| Width | 200 mm |
| Thickness | 5.4 mm |
| Brake Pad | without lining |
| Inner Bow Length | 393 mm |
| Function | Brake Shoe Set |
| Type | Brake Shoe Set |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Brake Shoe (35453)
- 1x Febi Brake Shoe (35454)
£64.98
Important compatibility info
| External Teeth, Diff.Side | 34 |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Transmission-side joint diameter | 81.5 mm |
| Min. Length | 604 mm |
| Wheel Sided Joint Diameter | 91 mm |
| External Teeth, Wheel Side | 30 |
| Placement on Vehicle | Front Axle Right |
| Thread Size | M24 x 1,5 |
| Additional Information 2 | with nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.98
Important compatibility info
| for OE number | 14 41 576 06R |
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
| for turbocharger (art. no.) | 186753 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.98
Important compatibility info
| Placement on Vehicle | Left |
| Material | Rubber/Metal |
| Paired article numbers | 17861 |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.99
Important compatibility info
| Number of Chain Links | 122 |
| Timing Chain Size | G53HING-2 |
| Chain Type | Simplex, Closed chain |
| Placement on Vehicle | Left |
| Type | Timing Chain |
| Function | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.99
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Rear Axle Left, Lower, Rear, Rear Axle Right |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with rubber mount, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.99
Important compatibility info
| Lock System | with double sealing |
| Additional Information | with adjuster |
| Paired article numbers | 179387 |
| Function | Door Lock |
| Placement on Vehicle | Left Front |
| Number of Connectors / Ports | 8 |
| Operating Mode | Electric |
| Extra Description | febi Plus |
| Type | Door Lock |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.00
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 258 mm. 227 mm |
| Thickness | 170 mm. 495 mm |
| Function | Bellow, air suspension |
| External Thread Size | M10 x 1,5, M22 x 1,5, M16 x 2 |
| Additional Information | with piston |
| Type | Bellow, air suspension |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.00
Important compatibility info
| Type | Slave Cylinder, clutch |
| Function | Slave Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.02
Important compatibility info
| Placement on Vehicle | before soot particulate filter |
| Number of Connectors / Ports | 2 |
| Cable Length | 280 mm |
| Type | Sensor, exhaust gas temperature |
| External Thread Size | M14 x 1,5 |
| Function | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.03
Important compatibility info
| Placement on Vehicle | Left, Rear |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, automatic transmission |
| Type | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.03
Important compatibility info
| External Thread Size | M12 x 1,75 |
| Placement on Vehicle | Lower, Front Axle Right |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 19849 |
| Cone Size | 16.3 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with lock nut, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.04
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information | with grease |
| Additional Information 2 | with nut |
| Thread Size | M24x1,5 |
| External Teeth, Wheel Side | 25 |
| Min. Length | 470 mm |
| Wheel Sided Joint Diameter | 87.1 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.04
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 19850 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts, with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.04
Important compatibility info
| Housing Type | without housing |
| Additional Information | with gasket/seal |
| Number of Connectors / Ports | 5 |
| Resistor Type | Hot-film Sensor |
| Function | Mass Air Flow Sensor |
| Type | Mass Air Flow Sensor |
| Length | 96 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.05
Important compatibility info
| Centering Diameter | 90 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Minimum thickness | 10 mm |
| Brake Disc Thickness | 12 mm |
| Rotor Style | Solid |
| Bolt Hole Circle Diameter | 130 mm |
| Thickness | 71.5 mm |
| Outer diameter | 305 mm |
| Placement on Vehicle | Rear Axle |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.06
Important compatibility info
| Outer diameter | 110 mm |
| Material | MVQ (silicone rubber), FPM (fluoride rubber) |
| Type | Charge Air Hose |
| Inner diameter | 100 mm |
| Function | Charge Air Hose |
| Hose Length | 270 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.06
Important compatibility info
| Operating Mode | Automatic |
| Type | Belt Tensioner, v-ribbed belt |
| Function | Belt Tensioner, v-ribbed belt |
| Outer diameter | 70 mm |
| Material | Metal |
| Width of castor bearing surface | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.06
Important compatibility info
| Additional Information | with fastening/mounting material, with gasket/seal |
| Operating Mode | Electric |
| Number of Connectors / Ports | 3 |
| Function | Actuator, headlight levelling |
| Extra Description | febi Plus |
| Type | Actuator, headlight levelling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.07
Important compatibility info
| Additional Information 2 | with screw |
| Parameter | 6PK |
| Inner diameter | 32 mm |
| Thickness | 83 mm |
| Number of Ribs | 5 |
| Function | Belt Pulley, crankshaft |
| Outer diameter | 160 mm |
| Extra Description | ProKit |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (26825)
- 1x Febi Centering Bolt, crankshaft pulley (33557)
£65.08
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Outer diameter | 98 mm |
| Number of Holes | 10 |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
| Width | 44 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Outer diameter 1 | 75 mm |
| Outer diameter 2 | 145 mm |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.09
Important compatibility info
| Function | Sensor, exhaust gas temperature |
| Cable Length | 400 mm |
| Number of Connectors / Ports | 2 |
| Spanner Size | 17 |
| Placement on Vehicle | before soot particulate filter |
| External Thread Size | M14 x 1,5 |
| Type | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.09
Important compatibility info
| Outer diameter 1 | 68 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 46 mm |
| Outer diameter | 93 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated ABS sensor |
| Inner diameter | 30 mm |
| Bearing Type | Tapered Roller Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Outer diameter 2 | 140 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing Kit (172781)
- 1x Febi Nut, kingpin (173786)
£65.09
Important compatibility info
| Paired article numbers | 176063 |
| Additional Information 2 | with ball joint |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Placement on Vehicle | Front Axle Left, Upper |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 17.3 mm |
| External Thread Size | M12 x 1,75 |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.09
Important compatibility info
| Material | Rubber/Metal |
| Function | Gasket, housing cover (crankcase) |
| Type | Gasket, housing cover (crankcase) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.09
Important compatibility info
| Material | Plastic |
| Additional Information 2 | without lid |
| Type | Expansion Tank, coolant |
| Function | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.09
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 78 |
| Timing Chain Size | G68VH-2 |
| Type | Timing Chain |
| Function | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.09
Important compatibility info
| Width of castor bearing surface | 21 mm |
| Outer diameter | 65 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.09
Important compatibility info
| Placement on Vehicle | Front |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.10
Important compatibility info
| Function | EGR Valve |
| Type | EGR Valve |
| Additional Information | with gaskets/seals |
| for OE number | 045 131 501 L |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.10
Important compatibility info
| Outer diameter | 161 mm |
| Thickness | 26 mm |
| Inner diameter | 30 mm |
| Number of Ribs | 4 |
| Parameter | 5PK |
| Function | Belt Pulley, crankshaft |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.11
Important compatibility info
| Function | Repair Kit, driver cab suspension |
| Type | Repair Kit, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.11
Important compatibility info
| Placement on Vehicle | Front Axle |
| Material | Rubber/Metal |
| Additional Information 2 | with fastening material, with ball bearing |
| Type | Repair Kit, suspension strut support mount |
| Function | Repair Kit, suspension strut support mount |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.11
Important compatibility info
| Additional Information 2 | Requires special tools for mounting |
| Chain Type | Duplex, Closed chain |
| Number of Chain Links | 126 |
| Timing Chain Size | D67ZN |
| Function | Timing Chain |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.12
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023