Proud to be a UK-based company
Contact us
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 21674 |
| Steering arm type | Control Arm |
| Material | Sheet Steel |
| Placement on Vehicle | Lower Front Axle, Left |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.29
Important compatibility info
| Chain Type | Duplex |
| Function | Guide Rails Kit, timing chain |
| Type | Guide Rails Kit, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.30
Important compatibility info
| Extra Description | ProKit |
| Outer diameter | 150 mm |
| Thickness | 35 mm |
| Bolt Hole Circle Diameter | 110 mm |
| Type | Joint, propshaft |
| Function | Joint, propshaft |
| Number of Holes | 6 |
| Additional Information 2 | with bolts/screws, with washers |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (101779)
- 3x Febi Screw (109456)
- 3x Febi Screw (109454)
- 3x Febi Washer (19107)
- 6x Febi Nut (19104)
£65.31
Important compatibility info
| External Thread Size | M16 x 1,5 |
| Placement on Vehicle | Front Axle |
| Outer diameter | 258 mm. 130 mm |
| Thickness | 372 mm |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Additional Information | without piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.32
Important compatibility info
| Material | Rubber/Metal |
| Outer diameter | 135 mm. 132 mm |
| Thickness | 30 mm |
| Inner diameter | 50 mm |
| Number of Holes | 6 |
| Bolt Hole Circle Diameter | 96 mm |
| Function | Joint, propshaft |
| Extra Description | ProKit |
| Type | Joint, propshaft |
| Additional Information | with nuts |
| Additional Information 2 | with bolts/screws, with washers |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (04435)
- 1x Febi Assembly Kit, propshaft joint (43424)
£65.32
Important compatibility info
| Bearing/Mounting Type | Hydro Mount |
| Placement on Vehicle | Front, Centre |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.34
Important compatibility info
| Bolt Hole Circle Diameter | 100 mm |
| Function | Joint, propshaft |
| Outer diameter | 140 mm |
| Number of Holes | 6 |
| Extra Description | ProKit |
| Type | Joint, propshaft |
| Additional Information | with nuts |
| Additional Information 2 | with bolts/screws, with washers |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (03530)
- 3x Febi Screw (02888)
- 3x Febi Screw (03704)
- 1x Febi Assembly Kit, propshaft joint (22118)
£65.35
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 440 mm |
| Additional Information 2 | with crown nut |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Pipe Diameter | 40 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| External Thread Size | M24 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.35
Important compatibility info
| Placement on Vehicle | Intake Side |
| Paired article numbers | 104242 |
| Function | Camshaft Adjuster |
| Extra Description | febi Plus |
| Type | Camshaft Adjuster |
| Additional Information 2 | without screw |
| Number of Teeth | 38 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.35
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 380 mm |
| Thickness | 81 mm |
| Brake Disc Thickness | 34 mm |
| Minimum thickness | 31 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 79 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.35
Important compatibility info
| Voltage | 12 V |
| Type | Interior Blower |
| Function | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.36
Important compatibility info
| Placement on Vehicle | Right |
| Function | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| for OE number | 11 21 043 44R |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.38
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Surface | Coated |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Outer diameter | 280 mm |
| Thickness | 45.3 mm |
| Minimum thickness | 20.4 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 67 mm |
| Function | Brake Disc |
| Rotor Style | Internally Vented |
| Type | Brake Disc Rotor |
| Brake Disc Thickness | 22 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.39
Important compatibility info
| Spanner Size | 22 |
| Cable Length | 620 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.39
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Spanner Size | 17 |
| Number of Connectors / Ports | 2 |
| Cable Length | 300 mm |
| Function | Sensor, exhaust gas temperature |
| Type | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.40
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 10 |
| Rated Power | 1.4 kW |
| Function | Starter |
| Type | Starter |
| for OE number | 62 02 094 |
| Replaces | 101608 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.41
Important compatibility info
| Outer diameter 1 | 72 mm |
| Outer diameter 2 | 142 mm |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Bearing Type | Angular Ball Bearing |
| Bolt Hole Circle Diameter | 110 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
| Outer diameter | 74 mm |
| Width | 63 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.41
Important compatibility info
| Number of Connectors / Ports | 8 |
| Function | Clock Spring, airbag |
| Extra Description | febi Plus |
| Type | Clock Spring, airbag |
| for OE number | 1K0 959 653 D |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.41
Important compatibility info
| Replaces | 108617 |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 295 mm |
| Thickness | 49.3 mm |
| Brake Disc Thickness | 26 mm |
| Minimum thickness | 23 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 62 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.42
Important compatibility info
| Thickness | 156 mm |
| Colour | Black |
| Type | Roll-off Piston, air suspension bellows |
| Outer diameter | 208 mm. 249 mm |
| Placement on Vehicle | Rear Axle |
| Function | Roll-off Piston, air suspension bellows |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.43
Important compatibility info
| Rim Hole Number | 4 -Hole |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 323 mm |
| Thickness | 34.2 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 66 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.43
Important compatibility info
| Type | Clock Spring, airbag |
| Function | Clock Spring, airbag |
| Number of Connectors / Ports | 10. 4 |
| Material | Plastic |
| Colour | Black |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.44
Important compatibility info
| Length | 223 mm |
| Outer diameter | 49.5 mm. 50 mm |
| Function | Repair Kit, kingpin |
| Additional Information | with Thrust Bearing |
| Replaces | 14521 |
| Placement on Vehicle | Front Axle |
| Extra Description | ProKit |
| Type | Repair Kit, kingpin |
| Additional Information 2 | with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (03785)
- 1x Febi Bush, kingpin (03789)
- 1x Febi Bush, steering knuckle (34565)
- 2x Febi Bush, steering knuckle (08524)
- 2x Febi Seal Ring, steering knuckle (03727)
- 2x Febi Seal Ring, steering knuckle (03725)
- 2x Febi Sealing/Protective Cap (08522)
- 2x Febi Circlip (03729)
- 2x Febi Grease Nipple (01094)
- 1x Febi Spacer, kingpin (15758)
- 1x Febi Spacer, kingpin (05007)
- 1x Febi Spacer, kingpin (05008)
- 1x Febi Spacer, kingpin (05009)
- 1x Febi Spacer, kingpin (05010)
- 1x Febi Spacer, kingpin (04997)
- 1x Febi Spacer, kingpin (04998)
- 2x Febi Lock Ring, steering knuckle (03728)
- 1x Febi Spacer, kingpin (04999)
- 1x Febi Spacer, kingpin (05000)
- 1x Febi Spacer, kingpin (05001)
£65.45
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 125.5 mm |
| Width | 94.7 mm |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 18.8 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.45
Important compatibility info
| Type | Auxiliary water pump (cooling water circuit) |
| Function | Auxiliary water pump (cooling water circuit) |
| for OE number | 059 121 012 A |
| Number of Connectors / Ports | 3 |
| Operating Mode | Electric |
| Voltage | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.47
Important compatibility info
| Paired article numbers | 181171 |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Brake caliper piston diameter | 35 mm |
| Material | Cast Iron |
| Placement on Vehicle | Rear Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.47
Important compatibility info
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Type | Brake Caliper |
| Paired article numbers | 181170 |
| Brake caliper piston diameter | 35 mm |
| Function | Brake Caliper |
| Placement on Vehicle | Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.47
Important compatibility info
| Housing material | Cast Aluminium |
| Number of Wings | 6 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.48
Important compatibility info
| Outer diameter | 70 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
| Type | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 26 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.49
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 365 mm |
| Thickness | 62.1 mm |
| Brake Disc Thickness | 36 mm |
| Minimum thickness | 34.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 75 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rotor Style | Internally Vented |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.49
Important compatibility info
| Outer diameter | 127 mm |
| Thickness | 25 mm |
| Inner diameter | 30 mm |
| Number of Ribs | 5 |
| Parameter | 6PK |
| Function | Belt Pulley, crankshaft |
| Type | Belt Pulley, crankshaft |
| for OE number | 0515.H6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.49
Important compatibility info
| Placement on Vehicle | engine sided |
| for OE number | 1 895 269 |
| Type | Rocker Arm, engine timing |
| Function | Rocker Arm, engine timing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.49
Important compatibility info
| Placement on Vehicle | Right |
| Number of Teeth | 26 |
| Operating Mode | Automatic |
| Type | Adjuster, braking system |
| Function | Adjuster, braking system |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.49
Important compatibility info
| Length | 950 mm |
| Additional Information | with rubber mounts |
| Placement on Vehicle | Front Axle |
| Stabiliser Diameter | 19 mm |
| Function | Stabiliser Bar, suspension |
| Extra Description | ProKit |
| Type | Stabiliser Bar, suspension |
| Additional Information 2 | with coupling rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Repair Kit, stabiliser bush (37069)
£65.51
Important compatibility info
| Minimum thickness | 26 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 76 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Placement on Vehicle | Front Axle |
| Outer diameter | 303 mm |
| Thickness | 56.9 mm |
| Brake Disc Thickness | 28 mm |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.51
Important compatibility info
| Thickness | 50 mm |
| Spanner Size | 27 |
| Thread Length | 16 mm |
| Number of Connectors / Ports | 3 |
| Type | Sensor, fuel pressure |
| Function | Sensor, fuel pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.51
Important compatibility info
| Placement on Vehicle | Front |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 367 mm |
| Min. Length | 203 mm |
| Pipe Diameter | 41 mm |
| Mounting points diameter | 12 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.51
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 300 mm |
| Thickness | 51 mm |
| Brake Disc Thickness | 14 mm |
| Minimum thickness | 12 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 76 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rotor Style | solid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.51
Important compatibility info
| External Thread Size | M18 x 1,5 |
| Internal Thread Size | M28 x 1,5 RHT |
| Placement on Vehicle | Front Axle |
| Length | 875 mm |
| Rod/Strut | Push Rod |
| Cone Size | 22.2 mm |
| Adjustable | Adjustable on one side |
| Pipe Diameter | 36 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.52
Important compatibility info
| Function | Timing Chain |
| Type | Timing Chain |
| Timing Chain Size | Z53 |
| Number of Chain Links | 140 |
| Chain Type | Silent Chain, with chain lock |
Additional Information
Technical Information
Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.52
Important compatibility info
| Parameter | 6 |
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
| Inner diameter | 13 mm |
| Outer diameter | 150 mm |
| Width | 150 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.53
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 310 mm |
| Thickness | 34.3 mm |
| Brake Disc Thickness | 25 mm |
| Minimum thickness | 22 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 65 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.54
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Rear, inner, Front Axle Right |
| Material | Rubber/Metal |
| Outer diameter | 71 mm |
| Thickness | 80 mm |
| Inner diameter | 14 mm |
| Shape/Form | slotted |
| Type | Mounting, control/trailing arm |
| Function | Mounting, control/trailing arm |
| Additional Information 2 | with mounting sleeve |
| Caster correction | +3 mm. -3 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.55
Important compatibility info
| Material | Aluminium |
| Type | Brake Master Cylinder |
| Function | Brake Master Cylinder |
| Piston Diameter | 20.6 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.55
Important compatibility info
| Wheel Sided Joint Diameter | 98 mm |
| Transmission-side joint diameter | 89 mm |
| Function | Drive Shaft |
| External Teeth, Diff.Side | 39 |
| External Teeth, Wheel Side | 27 |
| Type | Drive Shaft |
| Min. Length | 693 mm |
| Thread Size | M22x1,5 |
| Additional Information 2 | with nut |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.55
Important compatibility info
| Outer diameter 2 | 151 mm |
| Placement on Vehicle | Front Axle |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated ABS sensor |
| Bolt Hole Circle Diameter | 115 mm |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Outer diameter | 91 mm |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Outer diameter 1 | 70.5 mm |
| Inner diameter | 34 mm |
| Replaces | 172488 |
| Bearing Type | Angular Ball Bearing |
| Width | 42 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.56
Important compatibility info
| Driver Position | for right-hand drive vehicles |
| Function | Master Cylinder, clutch |
| Type | Master Cylinder, clutch |
| Additional Information 2 | without sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.58
Important compatibility info
| Number of Connectors / Ports | 9 |
| Operating Mode | Electric |
| Placement on Vehicle | Left Rear |
| Additional Information | with adjuster |
| Paired article numbers | 177553 |
| Type | Door Lock |
| Function | Door Lock |
| Extra Description | febi Plus |
| Lock System | with double sealing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.58
Important compatibility info
| Parameter | VL120R |
| Function | Clutch, radiator fan |
| Type | Clutch, radiator fan |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.59
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (4 pistons) |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 42.8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.60
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023