Important compatibility info
| Function | Filter, cabin air |
| Filter type | Pollen Filter |
| Length | 350 mm |
| Height | 25 mm |
| Width | 157 mm |
| Type | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Plastic |
| Engine Management | Timing Chain |
| Function | Guide, timing chain |
| for OE number | 601 052 05 16 |
| Type | Guide, timing chain |
| Placement on Vehicle | Right, Lower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Outer, Rear Axle Right |
| Width | 45 mm |
| Outer diameter | 40 mm |
| Inner diameter | 14 mm |
| Material | Rubber/Metal |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
Technical Information
Please tighten the mounting bolts with the wheels on the ground.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Rubber Buffer, suspension |
| Width | 57 mm |
| Material | PU (Polyurethane) |
| Placement on Vehicle | Front Axle |
| Length | 60 mm |
| Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Poles | 7 -pin connector |
| Additional Information | with gasket/seal |
| Type | Trailer Socket |
| Function | Trailer Socket |
| Voltage | 12 V |
| Additional Information 2 | with screw connection |
| Protection Type (IP Code) | 44 |
| DIN / ISO | 1724 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Gasket, cylinder head cover |
| Type | Gasket, cylinder head cover |
| for OE number | 654 016 07 00 |
| Material | ACM (Polyacrylate) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Inner diameter | 31 mm |
| Cooling Hose | from distributor to engine cooler |
| Type | Radiator Hose |
| Function | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Thickness | 46 mm |
| Inner diameter | 21 mm |
| Type | Mounting, stabiliser bar |
| Function | Mounting, stabiliser bar |
| Length | 45 mm |
| Width | 32 mm |
| Material | Rubber/Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Filter type | Filter Insert |
| Type | Oil Filter |
| Height | 134 mm |
| Function | Oil Filter |
| Inner diameter | 24 mm |
| Outer diameter | 83 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Filter type | In-Line Filter |
| Function | Fuel filter |
| Type | Fuel filter |
| Length | 118 mm |
| Outer diameter | 62 mm |
| Pipe Diameter | 8 mm |
| Housing material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Filter, cabin air |
| Width | 165 mm |
| Filter type | Pollen Filter |
| Height | 34 mm |
| Function | Filter, cabin air |
| Length | 405 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Air Filter |
| Length | 224 mm |
| Height | 42 mm |
| Width | 166 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 225 mm |
| Height | 25 mm |
| Length | 305 mm |
| Type | Air Filter |
| Function | Air Filter |
| Filter type | Filter Insert |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 20 mm |
| Colour | Black |
| Number of Connectors / Ports | 4 |
| Colour Coding | Blue |
| Function | Sensor, coolant temperature |
| Type | Sensor, coolant temperature |
| Additional Information 2 | without seal ring |
| Replaces | 19036 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | V-Ribbed Belt |
| Chemical Properties | Elastic |
| Length | 763 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 3 |
| Type | V-Ribbed Belt |
| Tensile Cord Material | Polyester |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | inner, Front Axle |
| Material | Rubber |
| Inner diameter | 28 mm |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Coolant Pipe |
| Cooling Hose | from engine to thermostat |
| Extra Description | febi Plus |
| Type | Coolant Pipe |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 58 mm |
| Placement on Vehicle | Front Axle |
| Length | 64 mm |
| Material | PU (Polyurethane) |
| Type | Rubber Buffer, suspension |
| Function | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inner diameter | 34.7 mm |
| Type | Shaft Seal, differential |
| Placement on Vehicle | Right, inner |
| Width | 7 mm |
| Material | ACM (Polyacrylate) |
| Outer diameter | 45.3 mm |
| Function | Shaft Seal, differential |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 95 mm |
| Outer diameter | 79 mm |
| Inner diameter | 38 mm |
| Filter type | Filter Insert |
| Seal Diameter | 87 mm |
| Type | Oil Filter |
| Function | Oil Filter |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 79 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Inner diameter | 25 mm |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 40 mm. 22 mm |
| Thickness | 82 mm |
| Inner diameter | 12 mm |
| Placement on Vehicle | Front Axle Left, Upper, Outer, Front Axle Right |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Material | PU (Polyurethane) |
| Thickness | 58 mm |
| Function | Rubber Buffer, suspension |
| Type | Rubber Buffer, suspension |
| Replaces | 44908 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Passenger Side |
| Length | 200 mm |
| Material | Thermoplast |
| Inner diameter 1 | 16 mm |
| Inner diameter 2 | 80 mm |
| Function | Bellow, steering |
| Paired article numbers | 45479 |
| Type | Bellow, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Oil Filter |
| Outer diameter | 77 mm |
| Filter type | Spin-on Filter |
| Height | 85 mm |
| Type | Oil Filter |
| Internal Thread Size | M20 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Gasket, cylinder head cover |
| Material | NBR (nitrile butadiene rubber) |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 247 mm |
| Height | 57 mm |
| Type | Air Filter |
| Function | Air Filter |
| Filter type | Filter Insert |
| Width | 207 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 52 mm |
| Length | 61 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Material | PU (Polyurethane) |
| Type | Rubber Buffer, suspension |
| Function | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Accessory Kit, disc brake pad |
| Placement on Vehicle | Front Axle |
| Type | Accessory Kit, disc brake pad |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Filter, cabin air |
| Type | Filter, cabin air |
| Filter type | Activated Carbon Filter |
| Width | 209 mm |
| Length | 241 mm |
| Height | 34 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023





























