Proud to be a UK-based company
Contact us
Important compatibility info
| Number of mounting bores | 6 |
| Thread Size | M16x1,5 |
| Bolt Hole Circle Diameter | 94 mm |
| Min. Length | 541 mm |
| Wheel Sided Joint Diameter | 98 mm |
| Transmission-side joint diameter | 108 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| External Teeth, Wheel Side | 38 |
| Bore Diameter | 10.6 mm |
| Additional Information | with grease |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.84
Important compatibility info
| Additional Information 2 | Requires special tools for mounting |
| Chain Type | Duplex, with chain lock |
| Number of Chain Links | 110 |
| Timing Chain Size | D67HP |
| Function | Timing Chain |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.87
Important compatibility info
| Units / Pulleys | incl. deflection pulley |
| Number of Ribs | 7 |
| Length | 1570 mm |
| Function | V-Ribbed Belt Set |
| Type | V-Ribbed Belt Set |
| Additional Information | with belt tensioner for V-ribbed belt |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (177663)
- 1x Febi Belt Tensioner, v-ribbed belt (100294)
- 1x Febi Deflection/Guide Pulley, v-ribbed belt (49367)
£70.87
Important compatibility info
| Driver Position | for right-hand drive vehicles |
| Type | Cable Pull, manual transmission |
| Inner length 2 | 868 mm |
| Function | Cable Pull, manual transmission |
| for OE number | 1 774 307 |
| Inner length 1 | 830 mm |
| Outer length 1 | 1213 mm |
| Outer length 2 | 1203 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.87
Important compatibility info
| Placement on Vehicle | Front Axle |
| Extra Description | ProKit |
| Outer diameter | 24 mm |
| Function | Tie Rod |
| Length | 897 mm |
| Steering | with tie rod ends |
| External Thread Size | M12 x 1,5 |
| Type | Tie Rod |
| Thread Length | 17 mm |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.88
Important compatibility info
| Placement on Vehicle | Right Front |
| Additional Information | with adjuster |
| Paired article numbers | 197576 |
| Number of Connectors / Ports | 6 |
| Type | Door Lock |
| Function | Door Lock |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.88
Important compatibility info
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 300 mm |
| Thickness | 68 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 25.4 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 80 mm |
| Surface | Coated |
| Number of mounting bores | 5 |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.88
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Additional Information | with rubber mounts |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Inner diameter | 16 mm |
| Cone Size | 23 mm |
| Material | Steel |
| Additional Information 2 | without ball joint |
| Paired article numbers | 175616 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.90
Important compatibility info
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 320 mm |
| Thickness | 44 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.91
Important compatibility info
| External Teeth, Wheel Side | 30 |
| Additional Information | with Split Pin |
| Additional Information 2 | with nut |
| Thread Size | M24x1,5 |
| Function | Drive Shaft |
| External Teeth, Diff.Side | 27 |
| Min. Length | 617 mm |
| Wheel Sided Joint Diameter | 90.9 mm |
| Transmission-side joint diameter | 91.7 mm |
| Type | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.91
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston), Brake Caliper with integrated parking brake |
| Paired article numbers | 198594 |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 47.91 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.92
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston), Brake Caliper with integrated parking brake |
| Paired article numbers | 198593 |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 47.91 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.92
Important compatibility info
| Number of Connectors / Ports | 2 |
| for OE number | 2195 284 |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.93
Important compatibility info
| Placement on Vehicle | Front |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 56 84 102 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.94
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 500 mm |
| Diameter | 1 mm |
| Additional Information | with rubber-metal mount |
| Thickness | 50 mm |
| Rod/Strut | Coupling Rod |
| Bore Diameter | 16 mm |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.95
Important compatibility info
| External Thread Size | M24 x 1,5 |
| Placement on Vehicle | Front Axle |
| Length | 590 mm |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Pipe Diameter | 38 mm |
| Function | Centre Rod Assembly |
| Internal Thread Size | M30 x 1,5 LHT, M30 x 1,5 RHT |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.98
Important compatibility info
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.98
Important compatibility info
| Function | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Placement on Vehicle | Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.98
Important compatibility info
| External Thread Size | M20 x 1,5 |
| Placement on Vehicle | Front Axle |
| Length | 600 mm |
| Rod/Strut | Push Rod |
| Cone Size | 26 mm |
| Adjustable | not adjustable |
| Pipe Diameter | 42 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.99
Important compatibility info
| Additional Information 2 | with screw |
| Width | 29 mm |
| Outer diameter | 146 mm |
| Inner diameter | 14 mm |
| Number of Ribs | 5 |
| Parameter | 6PK |
| Function | Belt Pulley, crankshaft |
| Extra Description | ProKit |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (34846)
- 1x Febi Pulley Bolt (33681)
£70.99
Important compatibility info
| Additional Information | with gasket/seal |
| Length | 370 mm |
| Height | 188 mm |
| Width | 42 mm |
| Number of Connectors / Ports | 2 |
| Type | Heat Exchanger, interior heating |
| Function | Heat Exchanger, interior heating |
| Core Length | 188 mm |
| Core Width | 370 mm |
| Core Depth | 42 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.00
Important compatibility info
| Rim Hole Number | 4 -Hole |
| Rotor Style | Solid |
| Placement on Vehicle | Front Axle |
| Function | Brake Disc |
| Surface | Coated |
| Bolt Hole Circle Diameter | 130 mm |
| Minimum thickness | 8 mm |
| Brake Disc Thickness | 9.5 mm |
| Outer diameter | 278 mm |
| Thickness | 83.8 mm |
| Centering Diameter | 39.8 mm |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.02
Important compatibility info
| Brake Disc Thickness | 28 mm |
| Placement on Vehicle | Front Axle |
| Minimum thickness | 26 mm |
| Function | Brake Disc |
| Bolt Hole Circle Diameter | 139.7 mm |
| Centering Diameter | 108 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Outer diameter | 319 mm |
| Thickness | 67.2 mm |
| Rotor Style | Internally Vented |
| Rim Hole Number | 6 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.02
Important compatibility info
| Outer diameter 2 | 136 mm |
| Outer diameter 1 | 63 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 63 mm |
| Outer diameter | 83 mm |
| Bolt Hole Circle Diameter | 104 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated ABS sensor |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.03
Important compatibility info
| Function | Steering Column Switch |
| Combi Switch Function | with wipe-wash function, with rear wipe-wash function |
| Number of Connectors / Ports | 9 |
| Type | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.03
Important compatibility info
| Outer diameter | 480 mm |
| Number of Teeth | 158 |
| Type | Ring Gear, flywheel |
| Function | Ring Gear, flywheel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.03
Important compatibility info
| Type | Gasket, cylinder head cover |
| Material | ACM (Polyacrylate) |
| for OE number | 20736230 |
| Function | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.03
Important compatibility info
| Brake caliper piston diameter | 41 mm |
| Function | Brake Caliper |
| Type | Brake Caliper |
| Paired article numbers | 181543 |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Material | Cast Iron |
| Placement on Vehicle | Rear Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.05
Important compatibility info
| Function | Control Unit, glow time |
| Extra Description | febi Plus |
| Number of Connectors / Ports | 8 |
| Type | Control Unit, glow time |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.05
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Material | Rubber/Metal |
| Outer diameter | 99 mm |
| Thickness | 175 mm |
| Inner diameter | 21 mm |
| Type | Mounting, stabiliser bar |
| Function | Mounting, stabiliser bar |
| Hole Spacing | 130 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.06
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 40412 |
| Steering arm type | Control Arm |
| Placement on Vehicle | Front Axle Left, Lower, Front |
| Material | Aluminium |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with fastening/mounting material |
| Additional Information 2 | with ball joint, with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (36049)
- 1x Febi Ball Joint (37339)
- 1x Febi Nut (34818)
- 1x Febi Washer (40408)
- 1x Febi Screw (21477)
- 1x Febi Screw (40410)
- 1x Febi Nut (14392)
£71.06
Important compatibility info
| Length | 106.21 mm |
| Width | 59.31 mm |
| Thickness | 117.52 mm |
| Valve type | Solenoid Valve |
| Function | Valve, ABS regulation |
| Type | Valve, ABS regulation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.06
Important compatibility info
| Function | Centre Rod Assembly |
| Pipe Diameter | 42 mm |
| Cone Size | 26 mm |
| Colour | Red |
| Rod/Strut | Push Rod |
| Outer diameter | 42 mm |
| Length | 897 mm |
| Placement on Vehicle | Front Axle |
| Internal Thread Size | M30 x 1,5 |
| Driver Position | for left-hand/right-hand drive vehicles |
| Extra Description | ProKit |
| External Thread Size | M20 x 1,5 |
| Type | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.07
Important compatibility info
| External Thread Size | M24 x 1,5 |
| Length | 927 mm |
| Outer diameter | 50 mm |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Pipe Diameter | 50 mm |
| Function | Centre Rod Assembly |
| Internal Thread Size | M30 x 1,5 |
| Extra Description | ProKit |
| Additional Information | with nuts |
| Type | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.07
Important compatibility info
| Additional Information 2 | with rolling bearing |
| Type | Suspension, propshaft |
| Function | Suspension, propshaft |
| Bearing Type | Rolling Bearing |
| Thickness | 182 mm |
| Outer diameter | 55 mm |
| Inner diameter | 35 mm |
| Width | 36 mm |
| Hole Spacing | 163 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.07
Important compatibility info
| Wear Warning Contact | prepared for wear warning indicator |
| Placement on Vehicle | Rear Axle |
| Width | 92.2 mm |
| Length | 210 mm |
| Additional Information 2 | with fastening material |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 30.2 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.07
Important compatibility info
| Cone Size | 24 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 174785 |
| Steering arm type | Control Arm |
| Additional Information 2 | with ball joint, with bearing |
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle Right, Front |
| Material | Steel |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.07
Important compatibility info
| Additional Information 2 | with lid |
| Function | Timing Case Cover |
| Type | Timing Case Cover |
| Extra Description | febi Plus |
| for OE number | 2 487 002 SK1 |
| Additional Information | with crankshaft seal |
| Material | Sheet Steel, FKM (fluorocarbon rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.07
Important compatibility info
| Cable Length | 235 mm |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
| External Thread Size | M14 x 1,5 |
| Number of Connectors / Ports | 2 |
| Placement on Vehicle | before soot particulate filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.07
Important compatibility info
| Outer diameter | 74 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Type | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 46 mm |
| for OE number | 5 0404 6191 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.07
Important compatibility info
| Number of Wings | 4 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Paper |
| Housing material | Cast Aluminium |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
| for OE number | 102 200 43 01 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.08
Important compatibility info
| Width | 25.4 mm |
| Number of Teeth | 113 |
| Type | Timing Belt Kit |
| Function | Timing Belt Kit |
| Surface | Coated |
| Belts | with rounded tooth profile |
| Belt Material | HNBR (hydrogenated nitrile butadiene rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (26050)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (26051)
- 1x Febi Tensioner Pulley, timing belt (33186)
£71.08
Important compatibility info
| Function | Mounting, engine |
| Type | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| Placement on Vehicle | Left |
| for OE number | 22 11 6 877 659 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.08
Important compatibility info
| for OE number | 205 240 68 00 |
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.08
Important compatibility info
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Placement on Vehicle | Right, Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.08
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 92 mm |
| Outer diameter | 135 mm |
| Thickness | 76 mm |
| Inner diameter | 35 mm |
| Number of Holes | 5 |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Additional Information | with fastening/mounting material |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.08
Important compatibility info
| Width | 19 mm |
| Number of Teeth | 135 |
| Belts | with rounded tooth profile |
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (14608)
- 1x Febi Water Pump, engine cooling (18124)
£71.08
Important compatibility info
| Placement on Vehicle | Left |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| for OE number | 212 240 00 00 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.09
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 345 mm |
| Thickness | 54 mm |
| Brake Disc Thickness | 22 mm |
| Minimum thickness | 19.4 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 67 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.11
Important compatibility info
| Height | 200 mm |
| Outer diameter 1 | 87 mm |
| Outer diameter 2 | 85 mm |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.12
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023